fbdev: Hecuba Framebuffer Driver
PATCH RESEND 9/9 fbdev: Hecuba Framebuffer Driver
From: Jaya Kumar <[email protected]>
This patch implements support for the E-Ink/hecuba display device. It uses deferred IO support.
Signed-off-by Jaya Kumar <[email protected]>
Signed-off-by Antonino Daplas <[email protected]>
---
drivers/video/Kconfig | 14 + drivers/video/Makefile | 1 drivers/video/hecubafb.c | 480 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 495 insertions(+), 0 deletions(-)
drivers/video/Kconfig +14 -0
@@ -555,6 +555,20 @@ config FB_IMAC help This is the frame buffer device driver for the Intel-based Macintosh +config FB_HECUBA + tristate "Hecuba board support" + depends on FB && X86 && MMU + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_DEFERRED_IO + help + This enables support for the Hecuba board. This driver was tested + with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO + interface (8 bit data, 4 bit control). If you anticpate using + this driver, say Y or M; otherwise say N. You must specify the + GPIO IO address to be used for setting control and data. + config FB_HGA tristate "Hercules mono graphics support" depends on FB && X86
drivers/video/Makefile +1 -0
@@ -66,6 +66,7 @@ obj-$(CONFIG_FB_SGIVW) += sgi obj-$(CONFIG_FB_ACORN) += acornfb.o obj-$(CONFIG_FB_ATARI) += atafb.o obj-$(CONFIG_FB_MAC) += macfb.o +obj-$(CONFIG_FB_HECUBA) += hecubafb.o obj-$(CONFIG_FB_HGA) += hgafb.o obj-$(CONFIG_FB_IGA) += igafb.o obj-$(CONFIG_FB_APOLLO) += dnfb.o
drivers/video/hecubafb.c new file +480 -0
480 lines not on this page · raw message
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV