PATCH: tun/tap driver hw address handling
Subsystems (2)
Hi Max,
Here's the patch we discussed at the beginning of the month.
Linus,
According to Documentation/SubmittingPatches "bug fixes" or "obvious"
changes
should CCed to you, so this is why I have done this.
Note: This entire email can be found at
http://bristyle.com/share/patch-tuntap-hw_addr_handling.txt
-----------------------------------------------------------------------------
Patch Description:
Kernel Version: 2.6.20.4
Summary:
Fix tun/tap driver's handling of hw addresses. Specifically, ensure
that
when the tun.dev_addr field is set, the net_device.dev_addr field gets set to the same value.
Background:
The device hw address is stored in 2 places, in the tun.dev_addr field, and of course the net_device struct's dev_addr field. It really
seems to
me that the tun.dev_addr field is redundant, and that anywhere it is
used
it would be better to use the net_device.dev_addr field. However, I do not want to start ripping things out of structs that other people might be using, so I've left it.
Fixed Problem:
The problem was that when one did an IOCTL on the tun/tap device, the device address would only get updated in the tun.dev_addr, and not the net_device.dev_addr field. In addition, the initial setting of the tun.dev_addr and net_device.addr fields were different. This meant that if you asked the tun/tap device for it's hw address, it would report a different value than ifconfig.
Still Remaining Problem:
There is a problem with not fixing the redundant tun.dev_addr field around. The problem is that when the net_device.dev_addr gets updated, we get no notification of this update. So if someone changes the
address
using "ifconfig hw ether xxxxx", then the net_device.dev_addr and tun.dev_addr fields different in value. Not good. If you think I
should
strip out the tun.dev_addr field and replace it's usage with net_device.dev_addr, then I will do that later. However, I would
need to
do a survey to see if anyone else's code outside of tun.c depends on
this
field. If so...I guess I'll just leave it.
drivers/net/tun.c 2007-03-24 01:36:59.000000000 -0700 renamed from drivers/net/tun.c 2007-03-23 12:52:51.000000000 -0700 +0 -0
@@ -18,6 +18,11 @@
/*
* Changes:
*
+ * Brian Braunstein <[email protected]> 2007/03/23
+ * Fixed hw address handling. Now net_device.dev_addr is kept consistent + * with tun.dev_addr when the address is set by this module. However, + * changes made to the net_device.dev_addr are still not tracked.
+ *
* Mike Kershaw <[email protected]> 2005/08/14
* Add TUNSETLINK ioctl to set the link encapsulation
*
@@ -196,7 +201,10 @@ static void tun_net_init(struct net_devi
dev->set_multicast_list = tun_net_mclist;
ether_setup(dev);- random_ether_addr(dev->dev_addr);
+
+ /* Random address already created for us by tun_set_iff, use it */
+ memcpy(dev->dev_addr, tun->dev_addr, min(sizeof(tun->dev_addr), sizeof(dev->dev_addr)) );
+
dev->tx_queue_len = TUN_READQ_SIZE; /* We prefer our
own queue length */
break;
}
@@ -636,6 +644,7 @@ static int tun_chr_ioctl(struct inode *i
return 0;
case SIOCGIFHWADDR:
+ /* Note: the actual net device's address may be different */
memcpy(ifr.ifr_hwaddr.sa_data, tun->dev_addr,
min(sizeof ifr.ifr_hwaddr.sa_data,
sizeof tun->dev_addr));
if (copy_to_user( argp, &ifr, sizeof ifr))
@@ -652,7 +661,8 @@ static int tun_chr_ioctl(struct inode *i
tun->dev->name,
tun->dev_addr[0], tun->dev_addr[1],
tun->dev_addr[2],
tun->dev_addr[3], tun->dev_addr[4],
tun->dev_addr[5]);
- return 0;
+ /* Now set the actual net device's address */
+ return dev_set_mac_address(tun->dev, &ifr.ifr_hwaddr); case SIOCADDMULTI:
/** Add the specified group to the character device's multicast filter
-----------------------------------------------------------------------------
Hi Brian,
Quoted 7 lines · Brian Braunstein
Linus,
According to
Documentation/SubmittingPatches"bug fixes" or "obvious"
changes
should CCed to you, so this is why I have done this.
IMHO these days patches got reviewed on LKML, then tested enough on the unstable -mm tree then it got added to mainline kernel. Subsystem maintaners can also add patches directly to mainline if they're trivial enough.
Quoted 3 lines
Note: This entire email can be found at
http://bristyle.com/share/patch-tuntap-hw_addr_handling.txt
I think No need for such two lines. everyone uses his favourite LKML archive.
Quoted 6 lines
Summary:
Fix tun/tap driver's handling of hw addresses. Specifically, ensure
that
when the tun.dev_addr field is set, the net_device.dev_addr field gets set to the same value.
Quoted 6 lines
Background:
The device hw address is stored in 2 places, in the tun.dev_addr field, and of course thenet_devicestruct'sdev_addrfield. It really
seems to
me that the tun.dev_addr field is redundant, and that anywhere it is
used
Editor/mailer wrapping your lines badly ?
Review
Quoted 5 lines
---
linux-2.6.20.4-ORIG/drivers/net/tun.c2007-03-23
12:52:51.000000000 -0700
+++linux-2.6.20.4/drivers/net/tun.c2007-03-24 01:36:59.000000000 -0700(quoted diff) +0
-0@@ -18,6 +18,11 @@
Please reread SubmittingPatches to know the canonical patch format (missing Signed-off-by and others).
Quoted 6 lines
(quoted diff) +2
-0/* * Changes: * + * Brian Braunstein <[email protected]> 2007/03/23 + * Fixed hw address handling. Now net_device.dev_addr is keptconsistent
[Remaing patch]
Patch can't be applied or even read cause your mailer has mistakenly wrapped its lines.
Regards,
Signature · 2 lines
Ahmed S. Darwish http://darwish.07.googlepages.com