Skip to contentSkip to conversation

bytes count question

DISCUSSION Michele Petrazzo - Unipex srl 3 participants 5 messages Mar 15, 2007

lore
Share & tools
lore
#0 lore raw

Hi list,
I'm making some test for see "how many traffic" create an IP, so, into the gateway, I create a chain, add a rule so all the traffic go through it, and here accept all the traffic.
After, from that IP, I download a file that has 1 MB and I control with a "iptables -nxvL my_chain" what number are on the "bytes" columns, but with a big surprise, I see 60000.
What're this number?

I thought to find something like 1048000 (or similar)!

I'm missing something?

Thanks,
Michele

#1 lore raw

Yes, only the first packet of a connection is counted. You should use a traffic analyzer for what you want to do.

-Sietse

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Michele Petrazzo - Unipex srl
Sent: Thursday, March 15, 2007 15:57
To: [email protected]
Subject: bytes count question

Hi list,
I'm making some test for see "how many traffic" create an IP, so, into the gateway, I create a chain, add a rule so all the traffic go through it, and here accept all the traffic.
After, from that IP, I download a file that has 1 MB and I control with a "iptables -nxvL my_chain" what number are on the "bytes" columns, but with a big surprise, I see 60000.
What're this number?

I thought to find something like 1048000 (or similar)!

I'm missing something?

Thanks,
Michele

#2 lore raw

Uh, no I think I may be wrong here. That might only count for NAT packets.

The 600.000 bytes might be due to compression. How did you download the file?

-Sietse

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Sietse van Zanen
Sent: Thursday, March 15, 2007 18:00
To: Michele Petrazzo - Unipex srl; [email protected]
Subject: RE: bytes count question

Yes, only the first packet of a connection is counted. You should use a traffic analyzer for what you want to do.

-Sietse

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Michele Petrazzo - Unipex srl
Sent: Thursday, March 15, 2007 15:57
To: [email protected]
Subject: bytes count question

Hi list,
I'm making some test for see "how many traffic" create an IP, so, into the gateway, I create a chain, add a rule so all the traffic go through it, and here accept all the traffic.
After, from that IP, I download a file that has 1 MB and I control with a "iptables -nxvL my_chain" what number are on the "bytes" columns, but with a big surprise, I see 60000.
What're this number?

I thought to find something like 1048000 (or similar)!

I'm missing something?

Thanks,
Michele

#3 lore raw
Quoted 5 lines · Sietse van Zanen

Uh, no I think I may be wrong here. That might only count for NAT packets.

The 600.000 bytes might be due to compression. How did you download the file?

Just discovered that that was the right values, but of the upload! :) I was wrong because now, with the right "download" rule (so a rule that see the traffic "to" and not from the test machine)!

Quoted 1 line

-Sietse

Thanks,
Michele

#4 lore raw
In reply to Michele Petrazzo - Unipex srl
Quoted 11 lines · Michele Petrazzo - Unipex srl

Hi list,
I'm making some test for see "how many traffic" create an IP, so, into the gateway, I create a chain, add a rule so all the traffic go through it, and here accept all the traffic.
After, from that IP, I download a file that has 1 MB and I control with a "iptables -nxvL my_chain" what number are on the "bytes" columns, but with a big surprise, I see 60000.
What're this number?

I thought to find something like 1048000 (or similar)!

(1) What is counted is L3 bytes, i.e. includes IP and TCP headers.
(2) Compression on L4 (ipcomp) or L7 (gzipped HTTP transfer)
(3) Use of caching proxies may reduce bandwidth by returned fresh entries

And BTW, any traffic analyzer (like iptraf) will show the same counting.

Jan