Fix path to modules.txt in Kconfig help

Documentation/modules.txt doesn't exist, but Documentation/kbuild/modules.txt does.

@@ -49,8 +49,8 @@
 

If you want to compile this driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want),

-	  say M here and read <file:Documentation/modules.txt>.  The module will
-	  be called ms02-nv.o.
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+	  The module will be called ms02-nv.ko.

config MTD_DATAFLASH
tristate "Support for AT45xxx DataFlash"

@@ -169,8 +169,8 @@
 
          If you want to compile the driver as a module ( = code which can be
          inserted in and removed from the running kernel whenever you want),
-          say M here and read <file:Documentation/modules.txt>.  The module
-          will be called ipw2100.ko.
+          say M here and read <file:Documentation/kbuild/modules.txt>.
+          The module will be called ipw2100.ko.

config IPW2100_MONITOR
bool "Enable promiscuous mode"
@@ -223,8 +223,8 @@

If you want to compile the driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want),

-          say M here and read <file:Documentation/modules.txt>.  The module
-          will be called ipw2200.ko.
+          say M here and read <file:Documentation/kbuild/modules.txt>.
+          The module will be called ipw2200.ko.

config IPW2200_MONITOR
bool "Enable promiscuous mode"
@@ -518,8 +518,8 @@

If you want to compile the driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want),

-	  say M here and read <file:Documentation/modules.txt>.  The module
-	  will be called prism54.ko.
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+	  The module will be called prism54.ko.

config USB_ZD1201
tristate "USB ZD1201 based Wireless device support"

@@ -843,8 +843,8 @@

This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called smc91x. If you want to compile it as a

-	  module, say M here and read <file:Documentation/modules.txt> as well
-	  as <file:Documentation/networking/net-modules.txt>.
+	  module, say M here and read <file:Documentation/kbuild/modules.txt>
+	  as well as <file:Documentation/networking/net-modules.txt>.

config SMC9194
tristate "SMC 9194 support"
@@ -899,7 +899,7 @@

This driver is also available as a module. The module will be called smc911x. If you want to compile it as a module, say M
- here and read <file:Documentation/modules.txt>
+ here and read <file:Documentation/kbuild/modules.txt>

config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"

@@ -170,7 +170,7 @@

If you want to compile this as a module ( = code which can be inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> and
+ say M here and read <file:Documentation/kbuild/modules.txt> and
<file:Documentation/scsi.txt>. The module will be called ch.o. If unsure, say N.

@@ -1777,7 +1777,7 @@

This driver is also available as a module. This module will be called zfcp. If you want to compile it as a module, say M here
- and read <file:Documentation/modules.txt>.
+ and read <file:Documentation/kbuild/modules.txt>.

config SCSI_SRP
tristate "SCSI RDMA Protocol helper library"

@@ -175,7 +175,7 @@
 

If you want to compile this as a module (=code which can be inserted into and removed from the running kernel), say M
- here and read <file:Documentation/modules.txt>. The module
+ here and read <file:Documentation/kbuild/modules.txt>. The module
will be called amba-clcd.

choice
@@ -1520,7 +1520,7 @@
This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called pxafb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.

If unsure, say N.

@@ -1573,7 +1573,7 @@
This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called w100fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.

If unsure, say N.

@@ -1590,7 +1590,7 @@
This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called s3c2410fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.

If unsure, say N.
config FB_S3C2410_DEBUG

@@ -189,7 +189,7 @@

and OUTPUT chains.

If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.

endmenu

@@ -132,7 +132,7 @@

tracking code will be able to do state tracking on SCTP connections.

If you want to compile it as a module, say M here and read
- Documentation/modules.txt. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.

config NF_CONNTRACK_AMANDA
tristate "Amanda backup protocol support"
@@ -296,8 +296,8 @@
affects the connection mark value rather than the packet mark value.

If you want to compile it as a module, say M here and read

-	  <file:Documentation/modules.txt>.  The module will be called
-	  ipt_CONNMARK.o.  If unsure, say `N'.
+	  <file:Documentation/kbuild/modules.txt>.  The module will be called
+	  ipt_CONNMARK.ko.  If unsure, say `N'.

config NETFILTER_XT_TARGET_DSCP
tristate '"DSCP" target support'
@@ -358,7 +358,7 @@
no protocol helpers for the selected packets).

If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.

config NETFILTER_XT_TARGET_SECMARK
tristate '"SECMARK" target support'
@@ -390,7 +390,7 @@
comments in your iptables ruleset.

If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.

config NETFILTER_XT_MATCH_CONNBYTES
tristate '"connbytes" per-connection counter match support'
@@ -401,7 +401,7 @@
number of bytes and/or packets for each direction within a connection.

If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.

config NETFILTER_XT_MATCH_CONNMARK
tristate '"connmark" connection mark match support'
@@ -412,8 +412,8 @@
connection mark value previously set for the session by `CONNMARK'.

If you want to compile it as a module, say M here and read

-	  <file:Documentation/modules.txt>.  The module will be called
-	  ipt_connmark.o.  If unsure, say `N'.
+	  <file:Documentation/kbuild/modules.txt>.  The module will be called
+	  ipt_connmark.ko.  If unsure, say `N'.

config NETFILTER_XT_MATCH_CONNTRACK
tristate '"conntrack" connection tracking match support'
@@ -437,7 +437,7 @@
and DCCP flags.

If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.

config NETFILTER_XT_MATCH_DSCP
tristate '"DSCP" match support'
@@ -556,7 +556,7 @@
byte counter.

If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.

config NETFILTER_XT_MATCH_REALM
tristate '"realm" match support'
@@ -570,7 +570,7 @@
in tc world.

If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.

config NETFILTER_XT_MATCH_SCTP
tristate '"sctp" protocol match support (EXPERIMENTAL)'
@@ -581,7 +581,7 @@
and SCTP chunk types.

If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.

config NETFILTER_XT_MATCH_STATE
tristate '"state" match support'

@@ -18,7 +18,7 @@

This protocol support is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called tipc. If you want to compile it
- as a module, say M here and read <file:Documentation/modules.txt>.
+ as a module, say M here and read <file:Documentation/kbuild/modules.txt>.

If in doubt, say N.