Skip to contentSkip to conversation

I can't compile with success because ueagle-atm.ko undefined

DISCUSSION Thibaud Hulin 2 participants 3 messages Mar 17, 2007 – Mar 19, 2007

lore
Share & tools
lore
#0 lore raw

Hi,
I can't compile with success my kernel, i've got this error message :

Building modules, stage 2.
MODPOST 1750 modules
WARNING: Can't handle masks in drivers/ide/pci/atiixp:FFFF05
WARNING: "try_to_freeze" [drivers/usb/atm/ueagle-atm.ko] undefined! make[2]: *** [__modpost] Erreur 1
make[1]: *** [modules] Erreur 2

When I uncheck this module, the compiled kernel works, but there are many problems and the kernel fails after minutes.

I use a Nvdia Geforce graphic card.

Thanks for help,
Thibaud.

#1 lore raw
Quoted 9 lines · Thibaud Hulin

Hi,
I can't compile with success my kernel, i've got this error message :

Building modules, stage 2.
MODPOST 1750 modules
WARNING: Can't handle masks in drivers/ide/pci/atiixp:FFFF05
WARNING: "try_to_freeze" [drivers/usb/atm/ueagle-atm.ko] undefined! make[2]: *** [__modpost] Erreur 1
make[1]: *** [modules] Erreur 2

You didn't mention the kernel version, but this is a bug in kernels 2.6.20 and 2.6.20.1 fixed in kernel 2.6.20.2 (and 2.6.20.3).

Quoted 3 lines

When I uncheck this module, the compiled kernel works, but there are many problems and the kernel fails after minutes.
...

That sounds like an unrelated problem that should be reported.

Quoted 2 lines

Thanks for help,
Thibaud.

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#2 lore raw

Sorry, I tried the kernel 2.6.19 and patched it with suspend2 for 2.6.19 For 2.6.20, suspend2 is on development, so I can't use it

Quoted 24 lines · Adrian Bunk
Quoted 9 lines · Thibaud Hulin

Hi,
I can't compile with success my kernel, i've got this error message :

Building modules, stage 2.
MODPOST 1750 modules
WARNING: Can't handle masks in drivers/ide/pci/atiixp:FFFF05
WARNING: "try_to_freeze" [drivers/usb/atm/ueagle-atm.ko] undefined! make[2]: *** [__modpost] Erreur 1
make[1]: *** [modules] Erreur 2

You didn't mention the kernel version, but this is a bug in kernels 2.6.20 and 2.6.20.1 fixed in kernel 2.6.20.2 (and 2.6.20.3).

Quoted 2 lines

When I uncheck this module, the compiled kernel works, but there are many problems and the kernel fails after minutes.
...

That sounds like an unrelated problem that should be reported.

Quoted 2 lines

Thanks for help,
Thibaud.

cu
Adrian