connection problem between samsung mobile phone nad bluez 3.8in slackware 11

Bluez-users Mirosław Malach 2 participants 3 messages Feb 13, 2007 – Feb 14, 2007 Bluetooth drivers

Share & tools

Mirosław Malach

author

2007-02-13 16:25 UTC #0 lore raw

hello
I have problem with connection between my usb bluetooth and =

samsung sgh -x680. I have installed slackware 11 with bluez 3.8 (lib and ut= ils). for essy diagnostic I sending for you output same commands =

and comments =

lsusb :

Bus 2 Device 2: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Blue= tooth Adapter

hciconfig -a =

hci0: Type: USB

        BD Address: 11:11:11:11:11:11 ACL MTU: 678:8 SCO MTU: 48:10
        UP RUNNING PSCAN
        RX bytes:7001 acl:10 sco:0 events:265 errors:0
        TX bytes:1665 acl:10 sco:0 commands:110 errors:0
        Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: MASTER
        Name: 'BlueZ (0)'
        Class: 0x3e0100
        Service Classes: Networking, Rendering, Capturing, Object Transfer,=

Audio
Device Class: Computer, Uncategorized
HCI Ver: 1.2 (0x2) HCI Rev: 0x1fe LMP Ver: 1.2 (0x2) LMP Subver: 0x=
1fe
Manufacturer: Integrated System Solution Corp. (57)
hcitool scan
Scanning ...

        00:17:D5:47:4E:88       Mir

hcid and spdp demon I have started by rc.bluetooth script from /etc/rc.d

my mobile phone hasn't seen my usb bluetooth =

When I have tried connect to my phone I haven't got any error but this lin= k hasn't work . =

command l2ping to phone work very well.

hcitool con
Connections:

I see my phon by kbluetooth but
when I try connect by kbluetoothd -> "OBEX file transfer" (hcidump work in = beckground) my phone askin my about pin. I write pin from my hcid.conf sect= ion passkey "1111"; and security auto but connection broken becous I see on=
my phone "pin invaide"

output hcidump -X -V

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 1 packets 1

Quoted 1 line

HCI Event: PIN Code Request (0x16) plen 6

    bdaddr 00:17:D5:47:4E:88
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
    bdaddr 00:17:D5:47:4E:88

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 10

    PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
    status 0x00 bdaddr 00:17:D5:47:4E:88

Quoted 1 line

HCI Event: Auth Complete (0x06) plen 3

status 0x06 handle 1
Error: PIN or Key Missing

Could you tell me where is problem ?

kind regards =

Miroslaw Malach

----------------------------------------------------
Ju=BF za miesi=B1c dj TIESTO we Wroc=B3awiu! =

Prze=BFyj kwietniow=B1 eksplozj=EA =BFywio=B3=F3w - Zobacz:
http://klik.wp.pl/?adr=3Dhttp%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fd66.html&sid=
=3D1016

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easi= er.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D1=
21642
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Marcel Holtmann

maintainer

2007-02-13 16:29 UTC #1 lore raw

Hi Miroslaw,

Quoted 52 lines

I have problem with connection between my usb bluetooth and
samsung sgh -x680. I have installed slackware 11 with bluez 3.8 (lib and utils). for essy diagnostic I sending for you output same commands and comments
lsusb :
Bus 2 Device 2: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter
hciconfig -a
hci0: Type: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 678:8 SCO MTU: 48:10 UP RUNNING PSCAN
RX bytes:7001 acl:10 sco:0 events:265 errors:0
TX bytes:1665 acl:10 sco:0 commands:110 errors:0
Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: MASTER
Name: 'BlueZ (0)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing, Object Transfer, Audio Device Class: Computer, Uncategorized
HCI Ver: 1.2 (0x2) HCI Rev: 0x1fe LMP Ver: 1.2 (0x2) LMP Subver: 0x1fe
Manufacturer: Integrated System Solution Corp. (57)
hcitool scan
Scanning ...
        00:17:D5:47:4E:88       Mir
hcid and spdp demon I have started by rc.bluetooth script from /etc/rc.d
my mobile phone hasn't seen my usb bluetooth
When I have tried connect to my phone I haven't got any error but this link hasn't work . command l2ping to phone work very well.
hcitool con
Connections:
I see my phon by kbluetooth but
when I try connect by kbluetoothd -> "OBEX file transfer" (hcidump work in beckground) my phone askin my about pin. I write pin from my hcid.conf section passkey "1111"; and security auto but connection broken becous I see on my phone "pin invaide"
output hcidump -X -V
Quoted 1 line
HCI Event: Number of Completed Packets (0x13) plen 5
handle 1 packets 1
Quoted 1 line
HCI Event: PIN Code Request (0x16) plen 6
    bdaddr 00:17:D5:47:4E:88
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
    bdaddr 00:17:D5:47:4E:88
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 10

Quoted 8 lines

    PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
    status 0x00 bdaddr 00:17:D5:47:4E:88
Quoted 1 line
HCI Event: Auth Complete (0x06) plen 3
status 0x06 handle 1
Error: PIN or Key Missing
Could you tell me where is problem ?

you might wanna check the syslog. My guess is that you don't have a passkey agent running.

Regards

Marcel

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier. Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Mirosław Malach

author

2007-02-14 11:25 UTC #2 lore raw

Re: [Bluez-users] connection problem between samsung mobilephone nad bluez 3.8in slackware 11

In reply to Mirosław Malach

Hi Marcel

Dnia 13-02-2007 o godz. 17:29 Marcel Holtmann napisa=B3(a):

Quoted 101 lines

Hi Miroslaw,
=
Quoted 3 lines
I have problem with connection between my usb bluetooth and =
samsung sgh -x680. I have installed slackware 11 with bluez 3.8 (lib =
and utils). for essy diagnostic I sending for you output same commands =
Quoted 8 lines
and comments =
=
lsusb :
=
Bus 2 Device 2: ID 1131:1001 Integrated System Solution Corp. KY-BT100 =
Bluetooth Adapter
Quoted 7 lines
=
hciconfig -a =
=
hci0: Type: USB
Quoted 11 lines
        BD Address: 11:11:11:11:11:11 ACL MTU: 678:8 SCO MTU: 48:10
        UP RUNNING PSCAN
        RX bytes:7001 acl:10 sco:0 events:265 errors:0
        TX bytes:1665 acl:10 sco:0 commands:110 errors:0
        Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: MASTER
        Name: 'BlueZ (0)'
        Class: 0x3e0100
        Service Classes: Networking, Rendering, Capturing, Object =
Transfer, Audio
Quoted 2 lines
Device Class: Computer, Uncategorized
HCI Ver: 1.2 (0x2) HCI Rev: 0x1fe LMP Ver: 1.2 (0x2) LMP =
Subver: 0x1fe
Quoted 6 lines
Manufacturer: Integrated System Solution Corp. (57)
hcitool scan
Scanning ...
=
        00:17:D5:47:4E:88       Mir
Quoted 8 lines
=
hcid and spdp demon I have started by rc.bluetooth script from /etc/rc.d =
my mobile phone hasn't seen my usb bluetooth =
When I have tried connect to my phone I haven't got any error but =
this link hasn't work . =
Quoted 7 lines
command l2ping to phone work very well.
=
hcitool con
Connections:
=
Quoted 6 lines
=
=
I see my phon by kbluetooth but
when I try connect by kbluetoothd -> "OBEX file transfer" (hcidump =
work in beckground) my phone askin my about pin. I write pin from my =
hcid.conf section passkey "1111"; and security auto but connection =
broken becous I see on my phone "pin invaide"
Quoted 12 lines
=
output hcidump -X -V
Quoted 1 line
HCI Event: Number of Completed Packets (0x13) plen 5
handle 1 packets 1
Quoted 1 line
HCI Event: PIN Code Request (0x16) plen 6
    bdaddr 00:17:D5:47:4E:88
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
    bdaddr 00:17:D5:47:4E:88
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 10
    PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
    status 0x00 bdaddr 00:17:D5:47:4E:88
Quoted 8 lines
Quoted 1 line
HCI Event: Auth Complete (0x06) plen 3
status 0x06 handle 1
Error: PIN or Key Missing
=
=
Could you tell me where is problem ?
=

Quoted 8 lines

you might wanna check the syslog. My guess is that you don't have a passkey agent running.
=
Regards
=
Marcel

I solved my problem by installation patch from side
http://www.kmobiletools.org/node/228

regards
Mirek

----------------------------------------------------
Ci=B1gnij 4 kana=B3y - zasmakuj w telewizji internetowej - Kliknij:
http://klik.wp.pl/?adr=3Dwww.wptv.wp.pl&sid=3D1015

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3DDE=
VDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users