Skip to contentSkip to conversation

MIPS: Disable address swizzling on __raw MMIO operations (resend)

PATCH New Kevin Cernekee 1 participant 1 message Jun 14, 2009 MIPS

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 MIPS: Disable address swizzling on __raw MMIO operations (resend)

{read,write}[bwlq] are used for PCI and may therefore need to implement address or data swizzling on big-endian systems. Those operations are unaffected by this patch.

__raw_{read,write}[bwlq] should always implement unswizzled accesses. Currently on MIPS, the __raw operations do not swizzle data (good) but do swizzle addresses (bad). This causes problems with code that assumes the __raw operations use the system's native endianness, such as the MTD physmap/CFI drivers.

It also means that the __raw behavior is not consistent between BE systems that use address swizzling (IP32) and BE systems that use CONFIG_SWAP_IO_SPACE for data swizzling (IP22).

---
 arch/mips/include/asm/io.h |   22 +++++++++++++---------
 1 files changed, 13 insertions(+), 9 deletions(-)
arch/mips/include/asm/io.h +13 -9
index 436878e..ea0647c 100644
@@ -301,7 +301,7 @@ static inline void iounmap(const volatile void __iomem *addr)
 #define war_octeon_io_reorder_wmb()		do { } while (0)
 #endif
 
-#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq)			\
+#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq, swiz)		\
 									\
 static inline void pfx##write##bwlq(type val,				\
 				    volatile void __iomem *mem)		\
@@ -311,7 +311,9 @@ static inline void pfx##write##bwlq(type val,				\
 									\
 	war_octeon_io_reorder_wmb();					\
 									\
-	__mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem));	\
+	__mem = swiz ?							\
+		(void *)__swizzle_addr_##bwlq((unsigned long)(mem)) :	\
+		(void *)mem;						\
 									\
 	__val = pfx##ioswab##bwlq(__mem, val);				\
 									\
@@ -344,7 +346,9 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem)	\
 	volatile type *__mem;						\
 	type __val;							\
 									\
-	__mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem));	\
+	__mem = swiz ?							\
+		(void *)__swizzle_addr_##bwlq((unsigned long)(mem)) :	\
+		(void *)mem;						\
 									\
 	if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long))	\
 		__val = *__mem;						\
@@ -406,15 +410,15 @@ static inline type pfx##in##bwlq##p(unsigned long port)			\
 	return pfx##ioswab##bwlq(__addr, __val);			\
 }
 
-#define __BUILD_MEMORY_PFX(bus, bwlq, type)				\
+#define __BUILD_MEMORY_PFX(bus, bwlq, type, swiz)			\
 									\
-__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1)
+__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1, swiz)
 
 #define BUILDIO_MEM(bwlq, type)						\
 									\
-__BUILD_MEMORY_PFX(__raw_, bwlq, type)					\
-__BUILD_MEMORY_PFX(, bwlq, type)					\
-__BUILD_MEMORY_PFX(__mem_, bwlq, type)					\
+__BUILD_MEMORY_PFX(__raw_, bwlq, type, 0)				\
+__BUILD_MEMORY_PFX(, bwlq, type, 1)					\
+__BUILD_MEMORY_PFX(__mem_, bwlq, type, 1)				\
 
 BUILDIO_MEM(b, u8)
 BUILDIO_MEM(w, u16)
@@ -438,7 +442,7 @@ BUILDIO_IOPORT(q, u64)
 
 #define __BUILDIO(bwlq, type)						\
 									\
-__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0)
+__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0, 0)
 
 __BUILDIO(q, u64)
 
Signature · 1 line
1.5.3.6