2.6.21-rc6-mm1 ima "BUG: held lock freed!"
We are looking into this.
Thanks!
Reiner
--forwarded by Reiner Sailer:
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc6/2.6.21-rc6-mm1/
I'm seeing this while booting:
ima (ima_init): No TPM chip found(rc = -19), activating TPM-bypass!
=========================
[ BUG: held lock freed! ]
-------------------------
swapper/1 is freeing memory c04c7660-c04c76a3, with a lock still held there! (ima_queue_lock){--..}, at: [<c0202710>] ima_create_htable+0x10/0x90 1 lock held by swapper/1:
#0: (ima_queue_lock){--..}, at: [<c0202710>] ima_create_htable+0x10/0x90
stack backtrace: [<c0105959>] dump_trace+0x1d9/0x210 [<c01059aa>] show_trace_log_lvl+0x1a/0x30 [<c0106612>] show_trace+0x12/0x20 [<c01066d6>] dump_stack+0x16/0x20 [<c014fd3a>] debug_check_no_locks_freed+0x17a/0x180 [<c014cdbf>] debug_mutex_init+0x1f/0x50 [<c0145451>] __mutex_init+0x41/0x50 [<c020277d>] ima_create_htable+0x7d/0x90 [<c020286f>] ima_init+0x3f/0x270 [<c051b765>] init_evm+0x1f5/0x250 [<c05015d2>] kernel_init+0x132/0x320 [<c010532f>] kernel_thread_helper+0x7/0x18 =======================
I saw this in -rc5-mm4 also.
I couldn't find a contact address in MAINTAINERS, so I've CC'd the
two authors listed on top of ima_create_htable.c , as well as the first submitter of the IMA stuff I found in my LKML archive.
As an aside, this computer does have (some sort of) TPM chip, but
the driver is built as a module, and not loaded at this point (not a worry for me, I don't intend to use it).
--
Joseph Fannin
[email protected] || [email protected]
Joseph,
we cannot reproduce the BUG you report. We have identified a potential source (spinlock around mutex_init). I have attached a small patch that removes this lock from the initialization of the hash table. I have tested the patch but I cannot verify if this resolves the problem you are seeing.
If you can reproduce the problem, would you mind to apply this patch and let us know if this solves the problem?
Thanks
Reiner
Quoted 41 lines · Reiner Sailer
We are looking into this.
Thanks!
Reiner--forwarded by Reiner Sailer:
Quoted 2 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc6/2.6.21-rc6-mm1/
Quoted 1 line
I'm seeing this while booting:
ima (
ima_init): No TPM chip found(rc = -19), activating TPM-bypass!=========================
[ BUG: held lock freed! ]
-------------------------
swapper/1 is freeing memory c04c7660-c04c76a3, with a lock still held there! (ima_queue_lock){--..}, at: [<c0202710>]ima_create_htable+0x10/0x901 lock held by swapper/1:
#0: (ima_queue_lock){--..}, at: [<c0202710>]ima_create_htable+0x10/0x90stack backtrace: [<c0105959>] dump_trace+0x1d9/0x210 [<c01059aa>] show_trace_log_lvl+0x1a/0x30 [<c0106612>] show_trace+0x12/0x20 [<c01066d6>] dump_stack+0x16/0x20 [<c014fd3a>] debug_check_no_locks_freed+0x17a/0x180 [<c014cdbf>] debug_mutex_init+0x1f/0x50 [<c0145451>] __mutex_init+0x41/0x50 [<c020277d>] ima_create_htable+0x7d/0x90 [<c020286f>] ima_init+0x3f/0x270 [<c051b765>] init_evm+0x1f5/0x250 [<c05015d2>] kernel_init+0x132/0x320 [<c010532f>] kernel_thread_helper+0x7/0x18 =======================I saw this in -rc5-mm4 also.
Quoted 12 lines
I couldn't find a contact address in
MAINTAINERS, so I've CC'd the
two authors listed on top ofima_create_htable.c, as well as the first submitter of the IMA stuff I found in my LKML archive.As an aside, this computer does have (some sort of) TPM chip, but
the driver is built as a module, and not loaded at this point (not a worry for me, I don't intend to use it).Signature · 2 lines
Joseph Fannin [email protected] || [email protected]
--- security/evm/ima/ima_queue.c | 2 -- 1 file changed, 2 deletions(-)
security/evm/ima/ima_queue.c +0 -2
@@ -38,7 +38,6 @@ void ima_create_htable(void) {int i; -spin_lock (&ima_queue_lock);INIT_LIST_HEAD (&ima_measurements);atomic_set (&ima_htable.len,0 );atomic_set (&ima_htable.violations,0 );
@@ -50,7 +49,6 @@ void ima_create_htable(void) }mutex_init (&ima_extend_list_mutex); -spin_unlock (&ima_queue_lock); }struct ima_queue_entry *ima_lookup_digest_entry (u8 * digest_value)
Quoted 10 lines · Reiner Sailer
Joseph,
we cannot reproduce the BUG you report. We have identified a potential source (spinlock around
mutex_init). I have attached a small patch that removes this lock from the initialization of the hash table. I have tested the patch but I cannot verify if this resolves the problem you are seeing.If you can reproduce the problem, would you mind to apply this patch and let us know if this solves the problem?
The BUG message no longer appears with this patch applied. It was 100% reproducible before, so I think this fixed it.
Thanks!
--
Joseph Fannin
[email protected] || [email protected]
Quoted 38 lines
Quoted 38 lines
I'm seeing this while booting:
ima (
ima_init): No TPM chip found(rc = -19), activating TPM-bypass!=========================
[ BUG: held lock freed! ]
-------------------------
swapper/1 is freeing memory c04c7660-c04c76a3, with a lock still held there!
(ima_queue_lock){--..}, at: [<c0202710>]ima_create_htable+0x10/0x901 lock held by swapper/1:
#0: (ima_queue_lock){--..}, at: [<c0202710>]ima_create_htable+0x10/0x90stack backtrace: [<c0105959>] dump_trace+0x1d9/0x210 [<c01059aa>] show_trace_log_lvl+0x1a/0x30 [<c0106612>] show_trace+0x12/0x20 [<c01066d6>] dump_stack+0x16/0x20 [<c014fd3a>] debug_check_no_locks_freed+0x17a/0x180 [<c014cdbf>] debug_mutex_init+0x1f/0x50 [<c0145451>] __mutex_init+0x41/0x50 [<c020277d>] ima_create_htable+0x7d/0x90 [<c020286f>] ima_init+0x3f/0x270 [<c051b765>] init_evm+0x1f5/0x250 [<c05015d2>] kernel_init+0x132/0x320 [<c010532f>] kernel_thread_helper+0x7/0x18 =======================I saw this in -rc5-mm4 also.
I couldn't find a contact address in
MAINTAINERS, so I've CC'd the
two authors listed on top ofima_create_htable.c, as well as the first submitter of the IMA stuff I found in my LKML archive.As an aside, this computer does have (some sort of) TPM chip, but
the driver is built as a module, and not loaded at this point (not a worry for me, I don't intend to use it).
Quoted 9 lines · On Wed, 11 Apr 2007 09:55:18 -0400 Joseph Fannin <[email protected]> wrote:
Quoted 8 lines · Reiner Sailer
Joseph,
we cannot reproduce the BUG you report. We have identified a potential source (spinlock around
mutex_init). I have attached a small patch that removes this lock from the initialization of the hash table. I have tested the patch but I cannot verify if this resolves the problem you are seeing.
Quoted 5 lines
Quoted 2 lines
If you can reproduce the problem, would you mind to apply this patch and let us know if this solves the problem?
The BUG message no longer appears with this patch applied. It was 100% reproducible before, so I think this fixed it.
ok, the spinlock in there was unneeded anwyay.
But I think this is a lockdep shortcoming - there's nothing wrong with doing mutex_init() inside spin_lock().
debug_mutex_init() is trying to work out whether we're initialising an already held mutex. This has nothing to do with the spinlock which we're holding. Perhaps debug_check_no_locks_freed() simply went wrong.
For Ingo - this:
=========================
[ BUG: held lock freed! ]
-------------------------
swapper/1 is freeing memory c04c7660-c04c76a3, with a lock still held there!
(ima_queue_lock){--..}, at: [<c0202710>] ima_create_htable+0x10/0x90
1 lock held by swapper/1:
#0: (ima_queue_lock){--..}, at: [<c0202710>] ima_create_htable+0x10/0x90
stack backtrace: [<c0105959>] dump_trace+0x1d9/0x210 [<c01059aa>] show_trace_log_lvl+0x1a/0x30 [<c0106612>] show_trace+0x12/0x20 [<c01066d6>] dump_stack+0x16/0x20 [<c014fd3a>] debug_check_no_locks_freed+0x17a/0x180 [<c014cdbf>] debug_mutex_init+0x1f/0x50 [<c0145451>] __mutex_init+0x41/0x50 [<c020277d>] ima_create_htable+0x7d/0x90 [<c020286f>] ima_init+0x3f/0x270 [<c051b765>] init_evm+0x1f5/0x250 [<c05015d2>] kernel_init+0x132/0x320 [<c010532f>] kernel_thread_helper+0x7/0x18 =======================
is coming out of -mm's security/evm/ima/ima_queue.c:ima_create_htable().