almost booted a K420...
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 12 lines · Paul (NCC/CS).
thought i'd have another go at my HP sitting in the corner, with the new CD debian-40r0-hppa-netinst.iso .
It seemed to boot the kernel but eventually I got:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Freeing unused kernel memory: 328k freed
FLT 0000Kernel panic - not syncing: Kernel Fault
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 8 lines
It's a HP9000/869 K420 with PA7200 cpu's.
The debian info seems to suggest this should boot
with a serial console.Can anyone offer me a direction in which to go to
from here?
Hi Paul,
I'm using a K370 with great success. I'm not sure whether the Debian install CD will work on a multi-CPU box. You can try unplugging all but the first CPU and see if that makes a difference. Also, you may have to add "console=ttyB0" or somesuch to PALO's boot line -- the K classes (and perhaps a few other boxes) have very different serial hardware. Oh wait, I see you have it already.
Sorry this is a bit vague; I run Gentoo and it was very simple to boot the install CD. So if you hit a dead-end, you might give it a try.
Good luck,
Andrew
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 10 lines
Hi Paul,
I'm using a K370 with great success. I'm not sure whether the Debian install CD will work on a multi-CPU box. You can try unplugging all but the first CPU and see if that makes a difference. Also, you may have to add "console=ttyB0" or somesuch to PALO's boot line -- the K classes (and perhaps a few other boxes) have very different serial hardware. Oh wait, I see you have it already.
Quoted 3 lines
Sorry this is a bit vague; I run Gentoo and it was very simple to boot the install CD. So if you hit a dead-end, you might give it a try.
Hi
some time back i posted the problem, but some one responded, but i did not solve the problem
after i saw the new version released, i want to try, but i see the same problem
Kernel Panic- not syncing:drivers/parisc/ccio-dma.c: ccio_alloc_range() I/O MMU is out of mapping resources
iam using webconsole and installing
any suggestion make my system working with Debian 4.X
HP R Class 9000, 1GB RAM, Built in CD ROM
thanks
ram
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Guys,
I just read your replies.
But before this I did try GENTOO.
wallah! :))))))))))))
works out of the box. ( cd).
i haven't done the full install yet but i'm very pleased that it boots a kernel.
PS i even tried gentoo on an IBM/RS6000 that i've never been able to get debian to boot on also. and it worked too!!!:))). double christmas:).
so gentoo gets my thumbs up at the present.
it's disappointing that debian never comes up with the stuff on these machines. But never mind.
thanks,
Paul.
Quoted 16 lines · ram
Hi Paul,
I'm using a K370 with great success. I'm not sure whether the Debian install CD will work on a multi-CPU box. You can try unplugging all but the first CPU and see if that makes a difference. Also, you may have to add "console=ttyB0" or somesuch to PALO's boot line -- the K classes (and perhaps a few other boxes) have very different serial hardware. Oh wait, I see you have it already.
Sorry this is a bit vague; I run Gentoo and it was very simple to boot the install CD. So if you hit a dead-end, you might give it a try.
Quoted 5 lines
Hi some time back i posted the problem, but some one responded, but i did not solve the problem
after i saw the new version released, i want to try, but i see the same problem Kernel Panic- not syncing:drivers/parisc/ccio-dma.c:ccio_alloc_range()I/O MMU is out of mapping resourcesiam using webconsole and installing any suggestion make my system working with Debian 4.X HP R Class 9000, 1GB RAM, Built in CD ROM thanksram
--
____________________________________________
Paul
Australian Bureau Of Meteorology
____________________________________________
"In a world without walls and fences,
who needs windows and gates ?"
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux