j3516a nic issue
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 4 lines · Alan Johnson
I have a D250/350 with a j3516a with the DEC 21140 chipset. When I try to install Debian 3.1 it freezes with a trap error on the display. It boots fine but when it tries to load the tulip driver it freezes and the display on the front shows FLT CBC0 TRAPS CPU01.
I need a bit more info. Can you look at the kernel bug HOW-TO FAQ?
http://www.parisc-linux.org/faq/kernelbug-howto.html
Quoted 2 lines
I have 3 of these boards and they all do the same thing. Is there
some trick to getting this board to work?
Not aware any trick was needed. I'm pretty sure they worked at one point.
Quoted 1 line
Has any one else had this issue?
Have you searched the parisc-linux mail archive?
Just look for the j3516a part number.
hth,
grant
Quoted 8 lines
Thanks for any assistance you might be able to provide.
Alan
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux