Skip to contentSkip to conversation

Can't change ipt_conntrack hashsize under debian sarge ???

LARTC Sébastien CRAMATTE 1 participant 2 messages Apr 17, 2007 – Apr 18, 2007

lore
Share & tools
lore
#0 lore raw

Hello,

I've tried to change ipt_conntrack hashsize and con under my debian
charge but doesn't work !
Ive got 2876Mb available for conntrack so I've done (according to some previous mail and this
http://www.wallfire.org/misc/netfilter_conntrack_perf.txt)

CONNTRACK_MAX = 2876 * 64 = 184064
HASHSIZE = 2876 * 8 = 23002

But the near power of 2 is 2^16 = 131072 ... I'm not sure that if it better to put 184064 or 131072 ?
Seems that netfilter algorythm is more eficient with power of 2 value ?

I can set the CONNTRACK_MAX value but not the HASHSIZE ... I've tried
add hashsize= paremeter in /etc/modules or in
/etc/modprobe.d/arch/i386 and I've done an "update-modules" ... When reboot the server the value still 8192 ???? Any Ideas ?

Moreover I've read somewhere that is better to augment HASHSIZE value to 1:2 ratio ... in my case 65440
But how can I determine the best value ? My computer is P4 Hyper Threading 3.6 Ghz ... Might be I should put 131072 as CONNTRACK_MAX ? This server is a bridge that only do L7 QoS (filter + o - 70 Mbits for

Quoted 1 line

600 customers ).

# cat /etc/sysctl.conf
net.ipv4.netfilter.ip_conntrack_max = 131072

#cat /proc/sys/net/ipv4/netfilter/ip_conntrack_max 131072

# cat /proc/sys/net/ipv4/netfilter/ip_conntrack_buckets
8192

#cat /etc/modprobe.d/arch/i386

alias eth0 tg3
alias eth1 tg3
alias eth2 e1000

options ipt_conntrack hashsizee440

Many thanks for you help
Regards

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw

Hello,

I've tried to change ipt_conntrack hashsize and con under my debian
charge but doesn't work !
Ive got 2876Mb available for conntrack so I've done (according to some previous mail and this
http://www.wallfire.org/misc/netfilter_conntrack_perf.txt)

CONNTRACK_MAX = 2876 * 64 = 184064
HASHSIZE = 2876 * 8 = 23002

But the near power of 2 is 2^16 = 131072 ... I'm not sure that if it better to put 184064 or 131072 ?
Seems that netfilter algorythm is more eficient with power of 2 value ?

I can set the CONNTRACK_MAX value but not the HASHSIZE ... I've tried
add hashsize= paremeter in /etc/modules or in
/etc/modprobe.d/arch/i386 and I've done an "update-modules" ... When reboot the server the value still 8192 ???? Any Ideas ?

Moreover I've read somewhere that is better to augment HASHSIZE value to 1:2 ratio ... in my case 65440
But how can I determine the best value ? My computer is P4 Hyper Threading 3.6 Ghz ... Might be I should put 131072 as CONNTRACK_MAX ? This server is a bridge that only do L7 QoS (filter + o - 70 Mbits for

Quoted 1 line

600 customers ).

# cat /etc/sysctl.conf
net.ipv4.netfilter.ip_conntrack_max = 131072

#cat /proc/sys/net/ipv4/netfilter/ip_conntrack_max 131072

# cat /proc/sys/net/ipv4/netfilter/ip_conntrack_buckets
8192

#cat /etc/modprobe.d/arch/i386

alias eth0 tg3
alias eth1 tg3
alias eth2 e1000

options ipt_conntrack hashsizee440

Many thanks for you help
Regards

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc