alternative TI FM MMC/SD driver for 2.6.21-rc7
Have you looked at the last version (0.8)? It fixed all outstanding issues (as far as I know).
--- Sergey Yanovich <[email protected]> wrote:
---------------------------------
Hi,
The device is present in many notebooks. Notebooks depend heavily onsuspend/resume functionality. tifm_core/7xx1/sd family is an ambitous,but uncompleted project. It used to crash on resuming, or hang up onsuspending. A less common failure used to be trigerred by a fast cardinsert/removal sequence. Finally, tifm_sd module needs to be manuallyinserted.
I have found it easier to rewrite the driver, than to fix. This driveris kind of mutant. The bones are taken from sdhci and omap, the meat -from tifm_*. It contains all features (and bugs except named above) oftifm_* as it was in kernel 2.6.21-rc7.
I have been testing this version since linux-2.6.18 (daily readingphotos from cards, daily suspending/resuming) without a single glitch.
This patch only provides sources.
[PATCH1/2] [mmc] alternative TI FM MMC/SD driver for 2.6.21-rc7 Kernel configuration in this message.
[PATCH2/2] [mmc] alternative TIFM driver config for 2.6.21-rc7
Alex Dubov has done exceptionally great lots of work to teach linuxspeak to TIFM. This is just a reorganization of his project.
The driver seems to be practically stable, but it definitely must betested by more people. Please also report any issues with this driverto linux bug#8352 so that valuable info is not lost.
Best regards,
Sergey Yanovich
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Quoted 2 lines · Alex Dubov
Have you looked at the last version (0.8)? It fixed all outstanding issues (as far as I know).
Seconded. I've been running Alex's latest driver since its release. I routinely suspend/resume 60-100 times between boots to S3 and disk, I've suspended with cards in the socket and I've tested it using SD and MMC .. I've not been able to fault it now. In fact, checking my mail archives, my last reported bug was on the 17th of Feb and it has been rock solid since. I just don't think about it anymore, it simply works...
Brad
Signature · 3 lines
"Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so." -- Douglas Adams
+1
Quoted 21 lines · Brad Campbell
Quoted 2 lines · Alex Dubov
Have you looked at the last version (0.8)? It fixed all outstanding issues (as far as I know).
Seconded. I've been running Alex's latest driver since its release. I routinely suspend/resume 60-100 times between boots to S3 and disk, I've suspended with cards in the socket and I've tested it using SD and MMC .. I've not been able to fault it now. In fact, checking my mail archives, my last reported bug was on the 17th of Feb and it has been rock solid since. I just don't think about it anymore, it simply works...
Brad
--
"Human beings, who are almost unique in having the ability
to learn from the experience of others, are also remarkable for their apparent disinclination to do so." -- Douglas Adams -
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Hi,
Quoted 10 lines
Quoted 10 lines
Quoted 1 line
Have you looked at the last version (0.8)? It fixed all outstanding
issues (as far as I know).
Quoted 1 line
Seconded. I've been running Alex's latest driver since its release. I routinely suspend/resume 60-100 times between boots to S3 and disk, I've suspended with cards in the socket and I've tested it using SD and MMC .. I've not been able to fault it now. In fact, checking my mail archives, my last reported bug was on the 17th of Feb and it has been rock solid since. I just don't think about it anymore, it simply works...
Well, I am tracking Alex's svn. It is for off-the-tree builds. I reorganized Alex's code in Oct 2006 and added
a patch to my debian/patches. Until debian shipped linux-2.6.20, there were no [tifm_*] in their tree, so no conflicts. The 2.6.20 came with tifm_sd-v0.6 which is not so stable. I dug lkml and bugzilla.kernel.org for fresh patches, but found http://bugzilla.kernel.org/show_bug.cgi?id=8052. Which made me think, svn is still unstable. I merged in-kernel updates to my old (v2.6.18-*) version. It compiles and runs OK, so I posted it. No offense to anyone.
Best regards,
Sergey
Quoted 1 line
Finally,
tifm_sdmodule needs to be manually inserted.
By the way, the driver emits custom uevent when the new card is detected. I was going to look at this some day in the future, but if you want to mess a little with hotplug scripts the issue can be easily solved.
As I already said before, many of the complications exist because this is an universal adapter, and memorystick support is quite near in the queue. A good hotplug script will, therefore, look at the "TIFM_CARD_TYPE" event var and load the appropriate media driver.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Hi,
Quoted 5 lines
Quoted 1 line
Finally,
tifm_sdmodule needs to be manually inserted.By the way, the driver emits custom uevent when the new card is detected. I was going to look at this some day in the future, but if you want to mess a little with hotplug scripts the issue can be easily solved.
It would be nice if you to provide a sample script. Unfortunately, hotplug scripts are distribution specific. And internal knowledge of your modules is required to write one.
For a typical, non-linux-geek user there are just two states of the device - available and not available. Ububtu is famous for its end-user support. They ship your driver since linux-2.6.17. But they pack it in one module. And that is _much_ easier, then a hotplug script.
And maybe, you would care to create a branch in you repository for in-the-tree compiles.
Quoted 2 lines
As I already said before, many of the complications exist because this is an universal adapter, and memorystick support is quite near in the queue.
The scope of your project is exceptionally wide. You plan to develop a whole new layer for memorystick as a part.
At the same time, the [tifm_sd] code is device specific, and [tifm_7xx1] code is also device specific. And both modules depend on the same device (of family of devices). That makes me think that a bus/controller/slot construction is not going to make thing any easier, but adds complexity.
In case of MMC/SD all abstraction has already been separated by the mmc layer, in case of MS it is up to you, how to implement.
Quoted 4 lines · Sergey Yanovich
For a typical, non-linux-geek user there are just two states of the device - available and not available. Ububtu is famous for its end-user support. They ship your driver since linux-2.6.17. But they pack it in one module. And that is _much_ easier, then a hotplug script.
No, we ship a udev script.
Quoted 4 lines
At the same time, the [
tifm_sd] code is device specific, and [tifm_7xx1] code is also device specific. And both modules depend on the same device (of family of devices). That makes me think that a bus/controller/slot construction is not going to make thing any easier, but adds complexity.
At one point it looked like it might be possible to drive the tifm_7xx0 devices in a similar way. I'm not sure if this is actually the case, but right now the driver design seems to accurately reflect the reality of the hardware design. I don't see any especially strong argument for breaking that.
Signature · 1 line
Matthew Garrett | [email protected]
Quoted 6 lines
Quoted 4 lines
For a typical, non-linux-geek user there are just two states of the device - available and not available. Ububtu is famous for its end-user support. They ship your driver since linux-2.6.17. But they pack it in one module. And that is _much_ easier, then a hotplug script.
No, we ship a udev script.
OK, me bad for using the present tense. But you had a single module in Oct 2006, didn't you? And maybe, you would like to post the script.
--
Sergey Yanovich
Quoted 9 lines · --- Sergey Yanovich
Quoted 6 lines
Quoted 4 lines
For a typical, non-linux-geek user there are just two states of the device - available and not available. Ububtu is famous for its end-user support. They ship your driver since linux-2.6.17. But they pack it in one module. And that is _much_ easier, then a hotplug script.
No, we ship a udev script.
OK, me bad for using the present tense. But you had a single module in Oct 2006, didn't you? And maybe, you would like to post the script.
Here's a simple udev rule that will do what you want:
SUBSYSTEM=="tifm", ACTION=="add", TIFM_CARD_TYPE=="SD", RUN+="/sbin/modprobe tifm_sd"
(just stick it somewhere in the udev rules).
You shall take into consideration that mmc currently lacks uevent support, so mmc_block must be loaded manually (this is a long pending todo thingy; supposedly it waits for the first sdio driver). There's no direct dependency of tifm_sd on mmc_block (only on mmc_core).
May be I'll add a modalias entry later so the explicit rule will not be needed.
As a side note: I have some very good reasons for the current driver architecture. You may want to look them up in the mail archive (I outlined them during the initial driver submission).
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Quoted 1 line
SUBSYSTEM=="tifm", ACTION=="add", TIFM_CARD_TYPE=="SD", RUN+="/sbin/modprobe
tifm_sd"
Thanks.
Quoted 2 lines
As a side note: I have some very good reasons for the current driver architecture. You may want to look them up in the mail archive (I outlined them during the initial driver submission).
I am not in any way argue that your driver architecture is wrong or that you should change anything. My point was simple. [tifm_sd] can only work with [tifm_7xx1]. If you add support for let's say [tifm_8xx2] in the future, which would have port offsets different that [tifm_7xx1], you would also need a completely new modules for slots (sd, ms, etc).
--
Sergey Yanovich
Quoted 7 lines
I am not in any way argue that your driver architecture is wrong or that you should change anything. My point was simple. [
tifm_sd] can only work with [tifm_7xx1]. If you add support for let's say [tifm_8xx2] in the future, which would have port offsets different that [tifm_7xx1], you would also need a completely new modules for slots (sd, ms, etc).
Does not this constitutes an unbounded speculation? And then, what would you propose to do with adapters that have SD support disabled? There are quite a few of those in the wild, as of right now (SD support is provided by bundled SDHCI on such systems, if at all). Similar argument goes for other media types as well - many controllers have xD support disabled too (I think you have one of those - Sony really values its customers). After all, it is not healthy to have dead code in the kernel.
On the other hand, if TI puts out a controller which is functionally identical, but has different register map, it wouldn't be hard to refactor the code.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Hi,
Quoted 6 lines
Quoted 4 lines
If you add support for let's say [
tifm_8xx2] in the future, which would have port offsets different that [tifm_7xx1], you would also need a completely new modules for slots (sd, ms, etc).Does not this constitutes an unbounded speculation?
Only time will tell :)
Quoted 7 lines
And then, what would you propose to do with
adapters that have SD support disabled? There are quite a few of those in the wild, as of right now (SD support is provided by bundled SDHCI on such systems, if at all). Similar argument goes for other media types as well - many controllers have xD support disabled too (I think you have one of those - Sony really values its customers). After all, it is not healthy to have dead code in the kernel.
A typical kernel config is an allmconfig, which has tones of dead
code: just see a 'General setup' part of your distro '.config'. There are item like 'SMP' selected by default for 686+ CPUs. And this is far more overhead that a single check of card type on insert.
To allow customization, boolean module options that disable certain card type may suffice.
And again, you are doing a great work with the driver.
--
Sergey Yanovich
Quoted 2 lines · Sergey Yanovich
I have found it easier to rewrite the driver, than to fix.
Before you get your hopes up, this development model is not one that will get your code merged upstream. You should really try to work with Alex, not side step him. Drivers are rarely complex enough to warrant, or even have room for, a rewrite. And judging from your code it looks more like reorganising the code that's already there.
In short, this "rewrite" won't fly. Report the issues you have with the current driver and work with the existing maintainer to get them fixed.
Rgds
Signature · 5 lines
-- Pierre Ossman Linux kernel, MMC maintainer http://www.kernel.org PulseAudio, core developer http://pulseaudio.org rdesktop, core developer http://www.rdesktop.org
Quoted 9 lines · --- Pierre Ossman
Quoted 2 lines · Sergey Yanovich
I have found it easier to rewrite the driver, than to fix.
Before you get your hopes up, this development model is not one that will get your code merged upstream. You should really try to work with Alex, not side step him. Drivers are rarely complex enough to warrant, or even have room for, a rewrite. And judging from your code it looks more like reorganising the code that's already there.
It is a sad truth. Instead of raising real issues that may remain in the driver, I was presented with "non-proof" that bus-adapter-device architecture I'm using is somehow bad and the driver should be turned into a monolithic blob, using config variables to disable unneeded functionality. Considering, that udev handles automatic loading of the drivers just fine (so it's not an end user issue at any rate), I don't see any justification for the change.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Quoted 11 lines · Alex Dubov
Quoted 5 lines
Before you get your hopes up, this development model is not one that will get your code merged upstream. You should really try to work with Alex, not side step him. Drivers are rarely complex enough to warrant, or even have room for, a rewrite. And judging from your code it looks more like reorganising the code that's already there.
It is a sad truth. Instead of raising real issues that may remain in the driver, I was presented with "non-proof" that bus-adapter-device architecture I'm using is somehow bad and the driver should be turned into a monolithic blob, using config variables to disable unneeded functionality. Considering, that udev handles automatic loading of the drivers just fine (so it's not an end user issue at any rate), I don't see any justification for the change.
I may be doing something the wrong way. I absolutely don't intend to start flames in this list.
Alex, your driver is great. You have done enormous amount of work, reverse engineering proprietary drivers. Since the territory you work on is unchartered, you can choose any design model, you see appropriate.
However, since we are working in an open community, everyone can give his opinion on this issue. The commenter must definitely back his words with real arguments. The patch at the top of this thread is such an argument. You may or may not care about it, at will.
I have submitted my version only after I have failed to find a stable version of your driver for the current kernel. If there is one, just post link to the patch. If not, let's make one.
Quoted 5 lines
I have submitted my version only after I have failed to find a stable version of your driver for the current kernel. If there is one, just post link to the patch. If not, let's make one.
As I already said, I'm not aware of any issues with version 0.8 of the driver. If you have any problems with it, I'll be glad to fix them.
The version in question was recently committed into the -mm tree. Otherwise, it's available from the project's website for a couple of months now:
http://developer.berlios.de/project/showfiles.php?group_id=5510
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Quoted 6 lines
As I already said, I'm not aware of any issues with version 0.8 of the driver. If you have any problems with it, I'll be glad to fix them.
The version in question was recently committed into the -mm tree. Otherwise, it's available from the project's website for a couple of months now:
It seems a bit out-of-date. Here is the output:
build-i386-sony-tx770p$ makescripts/kconfig/conf -s arch/i386/Kconfig
CHK include/linux/version.h CHK include/linux/utsrelease.h CHK include/linux/compile.h CC [M] drivers/misc/tifm_core.o CC [M] drivers/misc/tifm_7xx1.o CC [M] drivers/mmc/tifm_sd.o
drivers/mmc/tifm_sd.c: In function ‘tifm_sd_probe’:drivers/mmc/tifm_sd.c:987: error: ‘struct mmc_host’ has no member named ‘max_sectors’ make[2]: *** [drivers/mmc/tifm_sd.o] Error 1
make[1]: *** [drivers/mmc] Error 2
make: *** [drivers] Error 2
This is with v2.6.21 and your tarball unpacked like this:linux/tifm.h -> include/linux/tifm.htifm_sd.c -> drivers/mmc/tifm_sd.ctifm_7xx1.c -> drivers/misc/tifm_7xx1.c tifm_core.c -> drivers/misc/tifm_core.c
I will look in mm and write back.
Quoted 2 lines
It seems a bit out-of-date. Here is the output:
It clearly says there that the driver is for 2.6.20. The changes needed for 2.6.21 are actually very small (couple of fields in the mmc layer were renamed).
In general, it is impossible to maintain out-of-tree driver in sync with kernel tree - too many changes are committed into it. The -mm version obviously fits its tree.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Quoted 3 lines · Alex Dubov
In general, it is impossible to maintain out-of-tree driver in sync with kernel tree - too many changes are committed into it. The -mm version obviously fits its tree.
I have compiled v2.6.21 with git-mmc.patch of v2.6.21-rc7.mm2. After [tifm_sd] is loaded. My smoke test script at
http://bugzilla.kernel.org/attachment.cgi?id=11240&action=view
reliably hangs suspend.
I didn't even see a failure for 'modprove -r tifm', which doesn't exist in this build.
I will try to bisect git-mmc.patch to locate the source of trouble. And I will compile my version to check it against -mm tree.
Quoted 6 lines
After [
tifm_sd] is loaded. My smoke test script athttp://bugzilla.kernel.org/attachment.cgi?id=11240&action=view
reliably hangs suspend.
What is "modprobe tifm"? What modules have you loaded when it hangs?
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Quoted 1 line
What is "modprobe tifm"?
tifm is the name of the "monolithic blob" that I test :).
Quoted 2 lines
What modules have you loaded when it hangs?
I believe is the relevant part:
~$ lsmod | grep "mmc\|tifm"
tifm_sd 11272 0 mmc_core 25812 1 tifm_sd tifm_7xx1 6848 0 tifm_core 9876 2 tifm_sd,tifm_7xx1
Since there are [tifm_*] in lsmod; modprobe tifm is no run.
Can you successfully run this test with -mm tree? I that case the fault may be hardware related.
Quoted 2 lines
Can you successfully run this test with -mm tree? I that case the fault may be hardware related.
I have uploaded an updated version to bugzilla:
http://bugzilla.kernel.org/attachment.cgi?id=11308&action=view
Quoted 6 lines · Sergey Yanovich
I have compiled v2.6.21 with git-mmc.patch of v2.6.21-rc7.mm2. After [
tifm_sd] is loaded. My smoke test script athttp://bugzilla.kernel.org/attachment.cgi?id=11240&action=view
reliably hangs suspend.
I really wish you would stop removing me from cc...
Suspend is broken in -mm for all controllers. There is a bit of a race between the resume and remove functions that causes things to deadlock. I have a fix, but I'm working on pushing a lot of stuff to Linus right now so it might take a few days before things hit the repos.
Rgds
Signature · 5 lines
-- Pierre Ossman Linux kernel, MMC maintainer http://www.kernel.org PulseAudio, core developer http://pulseaudio.org rdesktop, core developer http://www.rdesktop.org
Quoted 6 lines · --- Pierre Ossman
Quoted 5 lines · Sergey Yanovich
I have compiled v2.6.21 with git-mmc.patch of v2.6.21-rc7.mm2. After [
tifm_sd] is loaded. My smoke test script athttp://bugzilla.kernel.org/attachment.cgi?id=11240&action=view
Quoted 9 lines
Quoted 1 line
reliably hangs suspend.
I really wish you would stop removing me from cc...
Suspend is broken in -mm for all controllers. There is a bit of a race between the resume and remove functions that causes things to deadlock. I have a fix, but I'm working on pushing a lot of stuff to Linus right now so it might take a few days before things hit the repos.
I prepared a tarball with 2.6.21 compatible driver (tifm-0.8e on berlios). I don't see any problems on stock 2.6.21.1. You may want to test it on your machine.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Quoted 1 line · Alex Dubov
I prepared a tarball with 2.6.21 compatible driver (tifm-0.8e on berlios).
This is "good enough" to withdraw my patch. I have filed it to
http://bugzilla.kernel.org/attachment.cgi?id=11312&action=view
in bug 8052
http://bugzilla.kernel.org/show_bug.cgi?id=8052
which seems to be resolved by the patch.
Quoted 1 line
I don't see any problems on stock 2.6.21.1.
Well, this version seem to ignore cards which are present at load.
I have this output:
~$ check once
Loading module tifm_sd ...
Checking for a card at /dev/mmcblk0p1 ...
failed.
for this script:
http://bugzilla.kernel.org/attachment.cgi?id=11317&action=view
and you can can see this bug for more details:
http://bugzilla.kernel.org/show_bug.cgi?id=8393