udev rule does not assign eth0 to ipw3945 device
Quoted 4 lines · Dan Nicholson
I have an ipw3945, so I can probably add some info here. The firmware loads fine by the kernel so long as you have an appropriate udev rule. The pain for me was always getting the daemon running and not having udev think it's an error. There are two reasons, that I could tell:
Could you please test whether the beta daemonless driver works for you?
http://intellinuxwireless.org/?p=iwlwifi
Signature · 11 lines
Alexander E. Patrakov ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net [email protected] https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
Quoted 10 lines · Alexander E. Patrakov
Quoted 4 lines · Dan Nicholson
I have an ipw3945, so I can probably add some info here. The firmware loads fine by the kernel so long as you have an appropriate udev rule. The pain for me was always getting the daemon running and not having udev think it's an error. There are two reasons, that I could tell:
Could you please test whether the beta daemonless driver works for you?
I plan on doing this soon, but I don't have time time to fool around with another external module right now. I'll post back when I get to it, though.
--
Dan
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
Quoted 10 lines · Dan Nicholson
Quoted 9 lines · Alexander E. Patrakov
Quoted 4 lines · Dan Nicholson
I have an ipw3945, so I can probably add some info here. The firmware loads fine by the kernel so long as you have an appropriate udev rule. The pain for me was always getting the daemon running and not having udev think it's an error. There are two reasons, that I could tell:
Could you please test whether the beta daemonless driver works for you?
Quoted 9 lines
Quoted 1 line
I plan on doing this soon, but I don't have time time to fool around with another external module right now. I'll post back when I get to it, though.
--
Dan
Props! The script/rule you sent, while not working straight away, did lead me in the right direction.
Boils down to a chicken/egg poaching: the udev rule triggers the script _before_ /lib/udev/firmware.sh actually loads the /lib/firmware/ipw3945.ucode.
So, hack /lib/firmware/ipw3945.ucode to trigger the /sbin/ipw3945d.sh script after the firmware load!
I had tried a WAIT_FOR_SYSFS='/sys/bus/pci/drivers/ipw3945/bin" argument in the rule, but that bought squat.
Yea, verily, there was a /sys/class/net/eth2, and smith retired for a private moment.
Signature · 12 lines
Christopher Smith Pursuer of knowledge ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net [email protected] https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel