Skip to contentSkip to conversation

savagefb: VGA state save and restore

PATCH In review Antonino A. Daplas 1 participant 1 message Apr 25, 2007 Framebuffer layer

lore
Share & tools
lore

Antonino A. Daplas

author
#0 lore raw

PATCH 4/41 savagefb: VGA state save and restore

Allow the saving and restoration of VGA text mode. The state is saved on the first open and restored on the last close. Because of the VGA registers are linearly mapped to the MMIO space, MMIO access is used which is not limited to X86 platforms nor to the primary display device.

An echo 0 > /sys/class/vtconsole/vtcon1/bind will convert the display from graphics to text mode.

Signed-off-by Antonino Daplas <[email protected]>

---

 drivers/video/Makefile                 |    2 +-
 drivers/video/savage/savagefb.h        |   10 +++++++-
 drivers/video/savage/savagefb_driver.c |   39 ++++++++++++++++++++++++++++++++
 3 files changed, 48 insertions(+), 3 deletions(-)
drivers/video/Makefile +1 -1
index 13ab41b..4fa1529 100644
@@ -38,7 +38,7 @@ obj-$(CONFIG_FB_ATY128)		  += aty/ macmo
 obj-$(CONFIG_FB_RADEON)		  += aty/
 obj-$(CONFIG_FB_SIS)		  += sis/
 obj-$(CONFIG_FB_KYRO)             += kyro/
-obj-$(CONFIG_FB_SAVAGE)		  += savage/
+obj-$(CONFIG_FB_SAVAGE)		  += savage/ vgastate.o
 obj-$(CONFIG_FB_GEODE)		  += geode/
 obj-$(CONFIG_FB_MBX)		  += mbx/
 obj-$(CONFIG_FB_I810)             += vgastate.o
drivers/video/savage/savagefb.h +8 -2
index e648a6c..8bfdfc3 100644
@@ -15,6 +15,8 @@ #define __SAVAGEFB_H__
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
 #include <linux/i2c-algo-bit.h>
+#include <linux/mutex.h>
+#include <video/vga.h>
 #include "../edid.h"
 
 #ifdef SAVAGEFB_DEBUG

@@ -189,8 +191,12 @@ struct savagefb_par {
 	struct savagefb_i2c_chan chan;
 	struct savage_reg state;
 	struct savage_reg save;
+	struct savage_reg initial;
+	struct vgastate vgastate;
+	struct mutex open_lock;
 	unsigned char   *edid;
 	u32 pseudo_palette[16];
+	u32 open_count;
 	int paletteEnabled;
 	int pm_state;
 	int display_type;

@@ -203,7 +209,7 @@ struct savagefb_par {
 	int clock[4];
 	int MCLK, REFCLK, LCDclk;
 	struct {
-		u8   __iomem *vbase;
+		void   __iomem *vbase;
 		u32    pbase;
 		u32    len;
 #ifdef CONFIG_MTRR

@@ -212,7 +218,7 @@ #endif
 	} video;
 
 	struct {
-		volatile u8  __iomem *vbase;
+		void  __iomem *vbase;
 		u32           pbase;
 		u32           len;
 	} mmio;
drivers/video/savage/savagefb_driver.c +39 -0
index 0166ec2..3d7507a 100644
@@ -1623,8 +1623,46 @@ static void savagefb_restore_state(struc
 	savagefb_blank(FB_BLANK_UNBLANK, info);
 }
 
+static int savagefb_open(struct fb_info *info, int user)
+{
+	struct savagefb_par *par = info->par;
+
+	mutex_lock(&par->open_lock);
+
+	if (!par->open_count) {
+		memset(&par->vgastate, 0, sizeof(par->vgastate));
+		par->vgastate.flags = VGA_SAVE_CMAP | VGA_SAVE_FONTS |
+			VGA_SAVE_MODE;
+		par->vgastate.vgabase = par->mmio.vbase + 0x8000;
+		save_vga(&par->vgastate);
+		savage_get_default_par(par, &par->initial);
+	}
+
+	par->open_count++;
+	mutex_unlock(&par->open_lock);
+	return 0;
+}
+
+static int savagefb_release(struct fb_info *info, int user)
+{
+	struct savagefb_par *par = info->par;
+
+	mutex_lock(&par->open_lock);
+
+	if (par->open_count == 1) {
+		savage_set_default_par(par, &par->initial);
+		restore_vga(&par->vgastate);
+	}
+
+	par->open_count--;
+	mutex_unlock(&par->open_lock);
+	return 0;
+}
+
 static struct fb_ops savagefb_ops = {
 	.owner          = THIS_MODULE,
+	.fb_open        = savagefb_open,
+	.fb_release     = savagefb_release,
 	.fb_check_var   = savagefb_check_var,
 	.fb_set_par     = savagefb_set_par,
 	.fb_setcolreg   = savagefb_setcolreg,

@@ -2173,6 +2211,7 @@ static int __devinit savagefb_probe(stru
 	if (!info)
 		return -ENOMEM;
 	par = info->par;
+	mutex_init(&par->open_lock);
 	err = pci_enable_device(dev);
 	if (err)
 		goto failed_enable;

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/