2.6.21: longhaul freq-scaling broken
Hi,
the new longhaul driver of 2.6.21 is broken on my Via Eden board. Frequencies can no longer be switched by whatever governor.
# cat /proc/cpuinfo processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 7 model name : VIA Samuel 2 stepping : 3 cpu MHz : 598.000 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow bogomips : 1200.75 clflush size : 32
I ported the longhaul driver from 2.6.20.7 to 2.6.21, it works fine.
Yeah, I know there are only a few patches between both, but I would like to reduce the test cycles to a minimum. Any suggestion where to look first is welcome therefore, ready-to-apply patches even more...
Thanks,
Jan
Quoted 1 line
Hi,
Hi
Quoted 24 lines
the new longhaul driver of 2.6.21 is broken on my Via Eden board. Frequencies can no longer be switched by whatever governor.
# cat /proc/cpuinfo processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 7 model name : VIA Samuel 2 stepping : 3 cpu MHz : 598.000 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow bogomips : 1200.75 clflush size : 32
Quoted 1 line
I ported the longhaul driver from 2.6.20.7 to 2.6.21, it works fine.
Yes. My fault. Bug is known, but it was to late to include patch fixing it in 2.6.21
Quoted 3 lines
Yeah, I know there are only a few patches between both, but I would like to reduce the test cycles to a minimum. Any suggestion where to look first is welcome therefore, ready-to-apply patches even more...
Longhaul ver. 2 support is the reason. First machine that was reported not working is exactly like Your's: Samuel 2 600MHz. Patch reverting changes is queued in cpufreq git. You can find it at
http://git.kernel.org/?p=linux/kernel/git/davej/cpufreq.git;a=commitdiff_plain;h=07844252ffd81ec192a62014bada1016c9703765
Quoted 2 lines
Thanks,
Jan
Regards
Rafał
----------------------------------------------------------------------
Po meczu.....kurde...:)
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 13 lines
Quoted 13 lines
Quoted 1 line
Hi,
Hi
Quoted 5 lines
the new longhaul driver of 2.6.21 is broken on my Via Eden board. Frequencies can no longer be switched by whatever governor. [...]
I ported the longhaul driver from 2.6.20.7 to 2.6.21, it works fine.
Yes. My fault. Bug is known, but it was to late to include patch fixing it in 2.6.21
Quoted 1 line
Yeah, I know there are only a few patches between both, but I would
like
Quoted 2 lines
to reduce the test cycles to a minimum. Any suggestion where to look first is welcome therefore, ready-to-apply patches even more...
Quoted 7 lines
Quoted 5 lines
Longhaul ver. 2 support is the reason. First machine that was reported not working is exactly like Your's: Samuel 2 600MHz. Patch reverting changes is queued in cpufreq git. You can find it at
http://git.kernel.org/?p=linux/kernel/git/davej/cpufreq.git;a=commitdiff_plain;h=07844252ffd81ec192a62014bada1016c9703765Should it go to -stable?
If I understood Dave Jones correcly it is work in progress.
Quoted 1 line
I have this on the list of known regressions already.
Can You send me more details?
Quoted 2 lines
Regards,
Michal
Regards
Rafał
----------------------------------------------------------------------- Linda jako gospodyni domowa - zobacz!!!
Quoted 1 line
Quoted 1 line
Quoted 1 line