Skip to contentSkip to conversation

qmimodem: return all serial numbers

PATCH Denis Kenzior 1 participant 1 message Apr 5, 2019 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Hi Tom,

Quoted 3 lines · Tom

Hi Denis,

Thank you for the quick response. By the way, I'm not able to post to ofono(a)ofono.org, so this reply probably won't show up there. I've not figured out what the problem is, but suspect it's blocking "garmin.com".

Please contact ofono-owner address again and see if someone can help. I don't really have any idea why we would be blocking any domain and you are the first to complain in 10 or so years.

Quoted 4 lines

The issue is that Quectel has a single mode LTE modem that populates all 3 fields. They do this because they also have the same modem that only supports CDMA. So, the current oFono code returns the ESN even though my modem is LTE only. Your info below is very informative, thanks! The CDMA info also confirms my observation about its level of support.

I have an alternative idea. What if I query QMI_DMS_GET_CAPS, figure out which radio_if is supported, then return IMEI if GSM/UMTS/LTE is supported, else ESN or MEID? This way Modem.Serial property will still behave as it does now.

That sounds workable.

Regards,
-Denis