Skip to contentSkip to conversation

Problem with 82365SL driver in 2.6.21.1

DISCUSSION Rafał Bilski 1 participant 1 message May 16, 2007

lore
Share & tools
lore
#0 lore raw

Hello,

I have problem with PC card slot in Wyse 3360SE terminal. Card insertion or removal is detected, but nothing more. I tried two different cards. Same behaviour.

Hardware is:

Quoted 4 lines

Intel ISA PCIC probe:
Intel i82365sl A step ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 1 socket
host opts [0]: none
ISA irqs (default) = 3,4,5,7,9,10,11,12,14,15 polling interval = 1000 ms

Dmesg after inserting card:

Quoted 1 line

pccard: PCMCIA card inserted into slot 0

I have similar hardware in other machine:

Quoted 4 lines

Intel i82365sl B step ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
host opts [0]: none
host opts [1]: none
ISA irqs (scanned) = 3,4,7,9,11,12 status change on irq 11

Which is working:

Quoted 4 lines

pccard: PCMCIA card inserted into slot 0
cs: memory probe 0x0d0000-0x0dffff: excluding 0xd0000-0xd1fff
cs: memory probe 0x0e0000-0x0effff: clean.
pcmcia: registering new device pcmcia0.0

I checked 82365 registers. Wyse has 0x82 at offset 0 and 0 at offset 6. In working case it is 0x83 at offset 0 and 1 at offset 6. Next differences at and above 0x10 offset.

I tried all "pccardctl" options. No change. Please point me direction in which I should search for solution. I don't know if it is important:
after reboot 82365 isn't detected at all on Wyse.

Please CC me.

Thank You
Rafał

----------------------------------------------------------------------
Daj ogloszenie za darmo do nowego serwisu Populada >>>http://link.interia.pl/f1a89