pm2fb: white spaces clean up
PATCH 4/8 pm2fb: white spaces clean up
From: Krzysztof Helt <[email protected]>
This patch removes trailing spaces and tabs and spaces before tabs.
Signed-off-by Krzysztof Helt <[email protected]>
Signed-off-by Antonino Daplas <[email protected]>
---
drivers/video/pm2fb.c | 202 +++++++++++++++++++++++++------------------------ 1 files changed, 101 insertions(+), 101 deletions(-)
drivers/video/pm2fb.c +101 -101
@@ -24,7 +24,7 @@* License. See the file COPYING in the main directory of this archive for * more details. * -* +* */ #include <linux/module.h>
@@ -58,7 +58,7 @@ #define DPRINTK(a,b...)#endif /* -* Driver data +* Driver data */ static char *mode__devinitdata =NULL ;
@@ -82,12 +82,12 @@ struct pm2fb_par {pm2type_t type;/* Board type */ unsigned char __iomem *v_regs;/* virtual address of p_regs */ -u32 memclock;/* memclock */ +u32 memclock;/* memclock */ u32 video;/* video flags before blanking */ u32 mem_config;/* MemConfig reg at probe */ u32 mem_control;/* MemControl reg at probe */ u32 boot_address;/* BootAddress reg at probe */ -u32 palette[16 ]; +u32 palette[16 ]; };/*
@@ -95,12 +95,12 @@ struct pm2fb_par* if we don't use modedb. */ static struct fb_fix_screeninfo pm2fb_fix__devinitdata = { - .id ="" , + .id ="" , .type =FB_TYPE_PACKED_PIXELS , .visual =FB_VISUAL_PSEUDOCOLOR , .xpanstep =1 , .ypanstep =1 , - .ywrapstep =0 , + .ywrapstep =0 , .accel =FB_ACCEL_3DLABS_PERMEDIA2 , };
@@ -109,26 +109,26 @@ static struct fb_fix_screeninfo pm2fb_fi*/ static struct fb_var_screeninfo pm2fb_var__devinitdata = {/* "640x480, 8 bpp @ 60 Hz */ - .xres =640 , - .yres =480 , - .xres_virtual =640 , - .yres_virtual =480 , - .bits_per_pixel =8 , - .red = {0 ,8 ,0 }, - .blue = {0 ,8 ,0 }, - .green = {0 ,8 ,0 }, - .activate =FB_ACTIVATE_NOW , - .height =-1 , - .width =-1 , - .accel_flags =0 , - .pixclock =39721 , - .left_margin =40 , - .right_margin =24 , - .upper_margin =32 , - .lower_margin =11 , - .hsync_len =96 , - .vsync_len =2 , - .vmode =FB_VMODE_NONINTERLACED + .xres =640 , + .yres =480 , + .xres_virtual =640 , + .yres_virtual =480 , + .bits_per_pixel =8 , + .red = {0 ,8 ,0 }, + .blue = {0 ,8 ,0 }, + .green = {0 ,8 ,0 }, + .activate =FB_ACTIVATE_NOW , + .height =-1 , + .width =-1 , + .accel_flags =0 , + .pixclock =39721 , + .left_margin =40 , + .right_margin =24 , + .upper_margin =32 , + .lower_margin =11 , + .hsync_len =96 , + .vsync_len =2 , + .vmode =FB_VMODE_NONINTERLACED };/*
@@ -166,7 +166,7 @@ static inline u32 pm2_RDAC_RD(struct pm2pm2_WR (p,PM2VR_RD_INDEX_LOW , idx &0xff ); index =PM2VR_RD_INDEXED_DATA ;break ; - } + }mb ();return pm2_RD (p, index); }
@@ -182,7 +182,7 @@ static inline void pm2_RDAC_WR(struct pmpm2_WR (p,PM2VR_RD_INDEX_LOW , idx &0xff ); index =PM2VR_RD_INDEXED_DATA ;break ; - } + }wmb ();pm2_WR (p, index, v);wmb ();
@@ -197,7 +197,7 @@ static inline void pm2v_RDAC_WR(struct p }#ifdef CONFIG_FB_PM2_FIFO_DISCONNECT -#define WAIT_FIFO (p,a) +#define WAIT_FIFO (p, a)#else static inline void WAIT_FIFO (struct pm2fb_par * p,u32 a) {
@@ -209,7 +209,7 @@ #endif/* * partial products for the supported horizontal resolutions. */ -#define PACKPP (p0,p1,p2) (((p2) << 6) | ((p1) << 3) | (p0)) +#define PACKPP (p0, p1, p2) (((p2) << 6) | ((p1) << 3) | (p0)) static const struct { u16 width; u16 pp;
@@ -357,7 +357,7 @@ #endifstatic void reset_config (struct pm2fb_par * p) {WAIT_FIFO (p,52 ); -pm2_WR (p,PM2R_CHIP_CONFIG ,pm2_RD (p,PM2R_CHIP_CONFIG )& +pm2_WR (p,PM2R_CHIP_CONFIG ,pm2_RD (p,PM2R_CHIP_CONFIG ) & ~(PM2F_VGA_ENABLE |PM2F_VGA_FIXED ));pm2_WR (p,PM2R_BYPASS_WRITE_MASK , ~(0L ));pm2_WR (p,PM2R_FRAMEBUFFER_WRITE_MASK , ~(0L ));
@@ -367,7 +367,7 @@ static void reset_config(struct pm2fb_papm2_WR (p,PM2R_RASTERIZER_MODE ,0 );pm2_WR (p,PM2R_DELTA_MODE ,PM2F_DELTA_ORDER_RGB );pm2_WR (p,PM2R_LB_READ_FORMAT ,0 ); -pm2_WR (p,PM2R_LB_WRITE_FORMAT ,0 ); +pm2_WR (p,PM2R_LB_WRITE_FORMAT ,0 );pm2_WR (p,PM2R_LB_READ_MODE ,0 );pm2_WR (p,PM2R_LB_SOURCE_OFFSET ,0 );pm2_WR (p,PM2R_FB_SOURCE_OFFSET ,0 );
@@ -535,7 +535,7 @@ static void set_video(struct pm2fb_par* vsync = video;DPRINTK ("video = 0x%x\n" , video); - +/* * The hardware cursor needs +vsync to recognise vert retrace. * We may not be using the hardware cursor, but the X Glint
@@ -574,9 +574,9 @@ static void set_video(struct pm2fb_par**/ /** -* pm2fb_check_var - Optional function. Validates a var passed in. -* @var: frame buffer variable screen structure -* @info: frame buffer structure that represents a single frame buffer +* pm2fb_check_var - Optional function. Validates a var passed in. +* @var: frame buffer variable screen structure +* @info: frame buffer structure that represents a single frame buffer * * Checks to see if the hardware supports the state requested by * var passed in.
@@ -615,23 +615,23 @@ static int pm2fb_check_var(struct fb_var var->xres = (var->xres +15 ) & ~15 ;/* could sometimes be 8 */ lpitch = var->xres * ((var->bits_per_pixel +7 )>>3 ); - +if (var->xres <320 || var->xres >1600 ) {DPRINTK ("width not supported: %u\n" , var->xres);return -EINVAL ; } - +if (var->yres <200 || var->yres >1200 ) {DPRINTK ("height not supported: %u\n" , var->yres);return -EINVAL ; } - +if (lpitch * var->yres_virtual > info->fix.smem_len) {DPRINTK ("no memory for screen (%ux%ux%u)\n" , var->xres, var->yres_virtual, var->bits_per_pixel);return -EINVAL ; } - +if (PICOS2KHZ (var->pixclock) >PM2_MAX_PIXCLOCK ) {DPRINTK ("pixclock too high (%ldKHz)\n" ,PICOS2KHZ (var->pixclock));return -EINVAL ;
@@ -672,17 +672,17 @@ #endifbreak ; } var->height = var->width =-1 ; - + var->accel_flags =0 ;/* Can't mmap if this is on */ - +DPRINTK ("Checking graphics mode at %dx%d depth %d\n" , var->xres, var->yres, var->bits_per_pixel);return 0 ; }/** -* pm2fb_set_par - Alters the hardware state. -* @info: frame buffer structure that represents a single frame buffer +* pm2fb_set_par - Alters the hardware state. +* @info: frame buffer structure that represents a single frame buffer * * Using the fb_var_screeninfo in fb_info we set the resolution of the * this particular framebuffer.
@@ -709,7 +709,7 @@ static int pm2fb_set_par(struct fb_infoclear_palette (par);if ( par->memclock )set_memclock (par, par->memclock); - + width = (info->var.xres_virtual +7 ) & ~7 ; height = info->var.yres_virtual; depth = (info->var.bits_per_pixel +7 ) & ~7 ;
@@ -722,7 +722,7 @@ static int pm2fb_set_par(struct fb_infoDPRINTK ("pixclock too high (%uKHz)\n" , pixclock);return -EINVAL ; } - + hsstart =to3264 (info->var.right_margin, depth, data64); hsend = hsstart +to3264 (info->var.hsync_len, depth, data64); hbend = hsend +to3264 (info->var.left_margin, depth, data64);
@@ -737,7 +737,7 @@ static int pm2fb_set_par(struct fb_info base =to3264 (info->var.yoffset * xres + info->var.xoffset, depth,1 );if (data64) video |=PM2F_DATA_64_ENABLE ; - +if (info->var.sync &FB_SYNC_HOR_HIGH_ACT ) {if (lowhsync) {DPRINTK ("ignoring +hsync, using -hsync.\n" );
@@ -778,9 +778,9 @@ static int pm2fb_set_par(struct fb_infoWAIT_FIFO (par,1 );pm2_WR (par,PM2VR_RD_INDEX_HIGH ,0 ); } - +set_aperture (par, depth); - +mb ();WAIT_FIFO (par,19 ); pm2_RDAC_WR(par, PM2I_RD_COLOR_KEY_CONTROL,
@@ -847,22 +847,22 @@ static int pm2fb_set_par(struct fb_infoset_pixclock (par, pixclock);DPRINTK ("Setting graphics mode at %dx%d depth %d\n" , info->var.xres, info->var.yres, info->var.bits_per_pixel); -return 0 ; +return 0 ; }/** -* pm2fb_setcolreg - Sets a color register. -* @regno: boolean, 0 copy local, 1 get_user() function -* @red: frame buffer colormap structure -* @green: The green value which can be up to 16 bits wide +* pm2fb_setcolreg - Sets a color register. +* @regno: boolean, 0 copy local, 1 get_user() function +* @red: frame buffer colormap structure +* @green: The green value which can be up to 16 bits wide * @blue: The blue value which can be up to 16 bits wide. -* @transp: If supported the alpha value which can be up to 16 bits wide. -* @info: frame buffer info structure -* -* Set a single color register. The values supplied have a 16 bit -* magnitude which needs to be scaled in this function for the hardware. +* @transp: If supported the alpha value which can be up to 16 bits wide. +* @info: frame buffer info structure +* +* Set a single color register. The values supplied have a 16 bit +* magnitude which needs to be scaled in this function for the hardware. * Pretty much a direct lift from tdfxfb.c. -* +* * Returns negative errno on error, or zero on success. */ static int pm2fb_setcolreg(unsigned regno, unsigned red, unsigned green,
@@ -906,7 +906,7 @@ static int pm2fb_setcolreg(unsigned regn* (blue << blue.offset) | (transp << transp.offset) * RAMDAC does not exist */ -#define CNVT_TOHW (val,width) ((((val)<<(width))+0x7FFF-(val))>>16) +#define CNVT_TOHW (val, width) ((((val) << (width)) + 0x7FFF -(val)) >> 16)switch (info->fix.visual) {case FB_VISUAL_TRUECOLOR :case FB_VISUAL_PSEUDOCOLOR :
@@ -916,9 +916,9 @@ #define CNVT_TOHW(val,width) ((((val)<<( transp =CNVT_TOHW (transp, info->var.transp.length);break ;case FB_VISUAL_DIRECTCOLOR : -/* example here assumes 8 bit DAC. Might be different -* for your hardware */ - red =CNVT_TOHW (red,8 ); +/* example here assumes 8 bit DAC. Might be different +* for your hardware */ + red =CNVT_TOHW (red,8 ); green =CNVT_TOHW (green,8 ); blue =CNVT_TOHW (blue,8 );/* hey, there is bug in transp handling... */
@@ -940,11 +940,11 @@ #undef CNVT_TOHWswitch (info->var.bits_per_pixel) {case 8 : -break ; -case 16 : +break ; +case 16 :case 24 : -case 32 : - par->palette[regno] = v; +case 32 : + par->palette[regno] = v;break ; }return 0 ;
@@ -956,15 +956,15 @@ #undef CNVT_TOHW }/** -* pm2fb_pan_display - Pans the display. -* @var: frame buffer variable screen structure -* @info: frame buffer structure that represents a single frame buffer +* pm2fb_pan_display - Pans the display. +* @var: frame buffer variable screen structure +* @info: frame buffer structure that represents a single frame buffer * * Pan (or wrap, depending on the `vmode' field) the display using the -* `xoffset' and `yoffset' fields of the `var' structure. -* If the values don't fit, return -EINVAL. +* `xoffset' and `yoffset' fields of the `var' structure. +* If the values don't fit, return -EINVAL. * -* Returns negative errno on error, or zero on success. +* Returns negative errno on error, or zero on success. * */ static int pm2fb_pan_display(struct fb_var_screeninfo *var,
@@ -980,24 +980,24 @@ static int pm2fb_pan_display(struct fb_v depth = (depth >32 ) ?32 : depth; base =to3264 (var->yoffset * xres + var->xoffset, depth,1 );WAIT_FIFO (p,1 ); -pm2_WR (p,PM2R_SCREEN_BASE , base); +pm2_WR (p,PM2R_SCREEN_BASE , base);return 0 ; }/** -* pm2fb_blank - Blanks the display. -* @blank_mode: the blank mode we want. -* @info: frame buffer structure that represents a single frame buffer +* pm2fb_blank - Blanks the display. +* @blank_mode: the blank mode we want. +* @info: frame buffer structure that represents a single frame buffer * -* Blank the screen if blank_mode != 0, else unblank. Return 0 if -* blanking succeeded, != 0 if un-/blanking failed due to e.g. a -* video mode which doesn't support it. Implements VESA suspend -* and powerdown modes on hardware that supports disabling hsync/vsync: -* blank_mode == 2: suspend vsync -* blank_mode == 3: suspend hsync -* blank_mode == 4: powerdown +* Blank the screen if blank_mode != 0, else unblank. Return 0 if +* blanking succeeded, != 0 if un-/blanking failed due to e.g. a +* video mode which doesn't support it. Implements VESA suspend +* and powerdown modes on hardware that supports disabling hsync/vsync: +* blank_mode == 2: suspend vsync +* blank_mode == 3: suspend hsync +* blank_mode == 4: powerdown * -* Returns negative errno on error, or zero on success. +* Returns negative errno on error, or zero on success. * */ static int pm2fb_blank (int blank_mode,struct fb_info *info)
@@ -1071,7 +1071,7 @@ static void pm2fb_block_op(struct fb_infpm2_WR (par,PM2R_RECTANGLE_ORIGIN , (y <<16 ) | x);pm2_WR (par,PM2R_RECTANGLE_SIZE , (h <<16 ) | w);wmb (); -pm2_WR (par,PM2R_RENDER ,PM2F_RENDER_RECTANGLE | +pm2_WR (par,PM2R_RENDER ,PM2F_RENDER_RECTANGLE | (x<xsrc ?PM2F_INCREASE_X :0 ) | (y<ysrc ?PM2F_INCREASE_Y :0 ) | (copy ?0 :PM2F_RENDER_FASTFILL ));
@@ -1234,7 +1234,7 @@ #if defined(__BIG_ENDIAN)DPRINTK ("Adjusting register base for big-endian.\n" );#endif DPRINTK ("Register base at 0x%lx\n" , pm2fb_fix.mmio_start); - +/* Registers - request region and map it. */ if ( !request_mem_region (pm2fb_fix.mmio_start, pm2fb_fix.mmio_len,"pm2fb regbase" ) ) {
@@ -1317,17 +1317,17 @@ #endif } info->fbops = &pm2fb_ops; - info->fix = pm2fb_fix; + info->fix = pm2fb_fix; info->pseudo_palette = default_par->palette; info->flags =FBINFO_DEFAULT | -FBINFO_HWACCEL_YPAN | -FBINFO_HWACCEL_COPYAREA | -FBINFO_HWACCEL_FILLRECT ; +FBINFO_HWACCEL_YPAN | +FBINFO_HWACCEL_COPYAREA | +FBINFO_HWACCEL_FILLRECT ;if (!mode) mode ="640x480@60" ; - - err =fb_find_mode (&info->var, info, mode,NULL ,0 ,NULL ,8 ); + + err =fb_find_mode (&info->var, info, mode,NULL ,0 ,NULL ,8 );if (!err || err ==4 ) info->var = pm2fb_var;
@@ -1348,8 +1348,8 @@ #endifreturn 0 ; err_exit_all: -fb_dealloc_cmap (&info->cmap); - err_exit_both: +fb_dealloc_cmap (&info->cmap); + err_exit_both:iounmap (info->screen_base);release_mem_region (pm2fb_fix.smem_start, pm2fb_fix.smem_len); err_exit_mmio:
@@ -1374,7 +1374,7 @@ static void __devexit pm2fb_remove(strucstruct pm2fb_par *par = info->par;unregister_framebuffer (info); - +iounmap (info->screen_base);release_mem_region (fix->smem_start, fix->smem_len);iounmap (par->v_regs);
@@ -1402,9 +1402,9 @@ static struct pci_device_id pm2fb_id_tabstatic struct pci_driver pm2fb_driver = { .name ="pm2fb" , - .id_table = pm2fb_id_table, - .probe = pm2fb_probe, - .remove =__devexit_p (pm2fb_remove), + .id_table = pm2fb_id_table, + .probe = pm2fb_probe, + .remove =__devexit_p (pm2fb_remove), };MODULE_DEVICE_TABLE (pci, pm2fb_id_table);
@@ -1423,7 +1423,7 @@ static int __init pm2fb_setup(char *optiif (!options || !*options)return 0 ; -while ((this_opt =strsep (&options,"," )) !=NULL ) { +while ((this_opt =strsep (&options,"," )) !=NULL ) {if (!*this_opt)continue ;if (!strcmp (this_opt,"lowhsync" )) {
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/