Skip to contentSkip to conversation

2.6.22-rc3-mm1 reiser4 bug

DISCUSSION Berck E. Nash 3 participants 3 messages Jun 2, 2007 – Jun 5, 2007

lore
Share & tools
lore
#0 lore raw

All appears to work fine, until I try to boot a kernel with a Reiser4 / partition. Then I get endless errors of the sort:

[  206.349450] sd 1:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET

driverbyte=DRIVER_OK,SUGGEST_OK

(See attached dmesg for more, I only sent the first 1,000 lines, it goes on until a hard reboot.)

The same partition and the same kernel work great as long as that partition isn't the current system root. The same kernel and the same hard drive works fine as long as the partition is formatted ReiserFS.

#1 lore raw
Quoted 4 lines · Berck E. Nash

All appears to work fine, until I try to boot a kernel with a Reiser4 / partition. Then I get endless errors of the sort:

[  206.349450] sd 1:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET
Quoted 8 lines

driverbyte=DRIVER_OK,SUGGEST_OK

(See attached dmesg for more, I only sent the first 1,000 lines, it goes on until a hard reboot.)

The same partition and the same kernel work great as long as that partition isn't the current system root. The same kernel and the same hard drive works fine as long as the partition is formatted ReiserFS.

It can't be a simple bug, because I am running 2.6.22-rc3-mm1 and Reiser4 on / right now, and it works well for me.

I am using a busybox initramfs that does the actual mounting. I don't know if that makes a difference.

Signature · 1 line
Zan Lynx <[email protected]>
#2 lore raw
In reply to Berck E. Nash

Hello.
I looked at your long attachment. It seems, you have problems with hardware. Would you please check your root drive (sde) by badblocks program?

Thanks,
Edward.

Quoted 23 lines · Berck E. Nash

All appears to work fine, until I try to boot a kernel with a Reiser4 / partition. Then I get endless errors of the sort:

[  206.349450] sd 1:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET

driverbyte=DRIVER_OK,SUGGEST_OK

(See attached dmesg for more, I only sent the first 1,000 lines, it goes on until a hard reboot.)

The same partition and the same kernel work great as long as that partition isn't the current system root. The same kernel and the same hard drive works fine as long as the partition is formatted ReiserFS. -
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/