Skip to contentSkip to conversation

ath10k-firmware: QCA4019 hw1.0: Add Linksys MR8300 V1.0 specific BDFs

PATCH In review Hans Geiblinger 2 participants 2 messages Sep 19, 2020 – Jan 21, 2022 1 message not in the archive Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore
#1 lore raw

PATCH v2 1/1 ath10k-firmware: QCA4019 hw1.0: Add Linksys MR8300 V1.0 specific BDFs

In reply to a message not in the archive

Hi,

The support for this device is currently being added into OpenWrt. This AP requires two special BDFs to get the Wi-Fi PHYs working (correctly).

* description for what hardware this is:
   - it is a IPQ4019 based board
     - one QCA40xx radio is used as 2.4GHz radio
     - one QCA40xx radio is used as 5GHz radio

* origin of the board file
   - boarddata files were taken from OEM Linksys FW_MR8300_1.1.7.201281_prod.img

* ids to be used with the board file
   - QCA4019 hw1.0
     + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-mr8300-v0-fcc
     MD5: 1e0be7672bd83ccad24cf8e998b8d1ef

     + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-mr8300-v0-fcc
     MD5: 5a65c2d79f838a6e0d9d05b776491ac8

* attach the actual board file
   - The name of the files are equal to the id string in the board-2.bin (minus the ".bin")

Kind regards,
Hans

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#2 lore raw
Quoted 23 lines · Hans Geiblinger

The support for this device is currently being added into OpenWrt. This AP requires two special BDFs to get the Wi-Fi PHYs working (correctly).

* description for what hardware this is:
   - it is a IPQ4019 based board
     - one QCA40xx radio is used as 2.4GHz radio
     - one QCA40xx radio is used as 5GHz radio

* origin of the board file
   - boarddata files were taken from OEM Linksys FW_MR8300_1.1.7.201281_prod.img

* ids to be used with the board file
   - QCA4019 hw1.0
     + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-mr8300-v0-fcc
     MD5: 1e0be7672bd83ccad24cf8e998b8d1ef

     + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-mr8300-v0-fcc
     MD5: 5a65c2d79f838a6e0d9d05b776491ac8

Quoted 3 lines

* attach the actual board file
   - The name of the files are equal to the id string in the board-2.bin (minus the ".bin")

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-mr8300-v0-fcc bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-mr8300-v0-fcc

Changed:

Deleted:

2 board image(s) added, 0 changed, 0 deleted, 80 in total

https://github.com/kvalo/ath10k-firmware/commit/faf338c7b4fe80c6b6bd84c94ae38a7c73aa0445

Signature · 8 lines
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k