Skip to contentSkip to conversation

SoC multiple streams

DISCUSSION Steve Longerbeam 3 participants 4 messages Jun 18, 2007 – Jun 28, 2007

lore
Share & tools
lore
#0 lore raw

Hi all,

I'm developing an SoC driver for a sound engine that supports playing up to 64 simultaneous substreams, all mixed in h/w to a stereo DAC. But it doesn't appear that the SoC framework supports multiple substreams, according to soc_new_pcm(). Am I missing something, or is this on the asoc development roadmap?

Thanks,
Steve

#1 lore raw
Quoted 8 lines · Steve Longerbeam

Hi all,

I'm developing an SoC driver for a sound engine that supports playing up to 64 simultaneous substreams, all mixed in h/w to a stereo DAC. But it doesn't appear that the SoC framework supports multiple substreams, according to soc_new_pcm(). Am I missing something, or is this on the asoc development roadmap?

It's now on the development roadmap ;)

https://bugtrack.alsa-project.org/wiki/wikka.php?wakka=ASoCRoadMap

Liam

#2 lore raw
Quoted 12 lines · Liam Girdwood
Quoted 9 lines · Steve Longerbeam

Hi all,

I'm developing an SoC driver for a sound engine that supports playing up to 64 simultaneous substreams, all mixed in h/w to a stereo DAC. But it doesn't appear that the SoC framework supports multiple substreams, according to soc_new_pcm(). Am I missing something, or is this on the asoc development roadmap?

Quoted 4 lines

It's now on the development roadmap ;)

https://bugtrack.alsa-project.org/wiki/wikka.php?wakka=ASoCRoadMap

that's cool, thanks.

I've got some more questions about multiple substreams. In the sound engine I'm working on, each "voice" (substream) has its own private controls, such as L/R volume, 3D (distance and angle factors), and gain envelopes. All 64 substreams are then mixed in h/w to a single stereo stream, and global controls are then applied, such as master volume.

It's looking like the way to implement per-substream controls is to add the controls for all possible substreams, and then somehow determine which substream is being referred to in the get/put callbacks, and then get/put the control for only that substream. Is this the way per-substream controls should be done?

Also, with 64 substreams and multiple controls for each, we're talking about adding hundreds of controls, can ALSA handle this? I can imagine alsamixer looking quite crowded :-/

Thanks,
Steve

#3 lore raw
Quoted 9 lines · Steve Longerbeam

It's looking like the way to implement per-substream controls is to add the controls for all possible substreams, and then somehow determine which substream is being referred to in the get/put callbacks, and then get/put the control for only that substream. Is this the way per-substream controls should be done?

Also, with 64 substreams and multiple controls for each, we're talking about adding hundreds of controls, can ALSA handle this? I can imagine alsamixer looking quite crowded :-/

Please check the ALSA emu10k1 driver for a sample implementation. 32 substreams, hardware mixing with independent HW volume control for each.

Lee