Skip to contentSkip to conversation

2.6.22-rc4-mm2: serial-convert-early_uart-to-earlycon-for-8250

DISCUSSION Andy Whitcroft 2 participants 2 messages Jun 21, 2007

lore
Share & tools
lore
#0 lore raw

The following patch to 2.6.22-rc4-mm2 seems to update the early console support for the 8250 uarts:

serial-convert-early_uart-to-earlycon-for-8250

This moved from naming the 8250 uart 'uart' to 'uart8250' in the console= kernel parameter. While this is sensible long term to allow other uarts to be supported sanely this puts existing users with existing console configurations in a difficult position as their console output just stops appearing. It makes life almost impossible for any automatic testers as they now need to have different command lines for different versions of the kernel.

I think we need to maintain 'uart' as an alias here.

-apw

#1 lore raw
Quoted 13 lines · Andy Whitcroft

The following patch to 2.6.22-rc4-mm2 seems to update the early console support for the 8250 uarts:

serial-convert-early_uart-to-earlycon-for-8250

This moved from naming the 8250 uart 'uart' to 'uart8250' in the console= kernel parameter. While this is sensible long term to allow other uarts to be supported sanely this puts existing users with existing console configurations in a difficult position as their console output just stops appearing. It makes life almost impossible for any automatic testers as they now need to have different command lines for different versions of the kernel.

Quoted 1 line

I think we need to maintain 'uart' as an alias here.

I will try to make one patch to use uart too.

YH