Skip to contentSkip to conversation

2.6.21.5 BUG: USB FTDI FT323BM usb exports duplicate symbols

DISCUSSION Clemens Koller 2 participants 4 messages Jun 27, 2007

lore
Share & tools
lore
#0 lore raw

Whenever I plug/unplug the FTDI FT232BM USB-RS232 converter, the latest 2.6.21.5 kernel complains:

usb 2-1: USB disconnect, address 7
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
ftdi_sio 2-1:1.0: device disconnected
usb 3-1: new full speed USB device using ohci_hcd and address 43
usb 3-1: configuration #1 chosen from 1 choice
ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
drivers/usb/serial/ftdi_sio.c: Detected FT232BM
usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
usbcore: exports duplicate symbol usb_buffer_unmap_sg (owned by kernel)
usbserial: exports duplicate symbol usb_serial_port_softint (owned by kernel)
kobject_add failed for ftdi_sio with -EEXIST, don't try to register things with the same name in the same directory.

Call Trace:
[C4A6DE10] [C0009018] show_stack+0x4c/0x1ac (unreliable)
[C4A6DE50] [C013DF80] kobject_shadow_add+0x160/0x1a4
[C4A6DE70] [C003A250] mod_sysfs_setup+0x28/0xd4
[C4A6DE90] [C003B4BC] sys_init_module+0xfc4/0x149c
[C4A6DF40] [C0002304] ret_from_syscall+0x0/0x3c

usb 3-1: USB disconnect, address 43
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
ftdi_sio 3-1:1.0: device disconnected
usb 3-1: new full speed USB device using ohci_hcd and address 44
usb 3-1: configuration #1 chosen from 1 choice
ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
drivers/usb/serial/ftdi_sio.c: Detected FT232BM
usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
usbcore: exports duplicate symbol usb_buffer_unmap_sg (owned by kernel)
usbserial: exports duplicate symbol usb_serial_port_softint (owned by kernel)
kobject_add failed for ftdi_sio with -EEXIST, don't try to register things with the same name in the same directory.

Call Trace:
[C50BFE10] [C0009018] show_stack+0x4c/0x1ac (unreliable)
[C50BFE50] [C013DF80] kobject_shadow_add+0x160/0x1a4
[C50BFE70] [C003A250] mod_sysfs_setup+0x28/0xd4
[C50BFE90] [C003B4BC] sys_init_module+0xfc4/0x149c
[C50BFF40] [C0002304] ret_from_syscall+0x0/0x3c

Is this considered harmful?
Let me know if you need more debugging information.

Regards,

Signature · 10 lines
Clemens Koller
__________________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com
#1 lore raw

Am Mittwoch, 27. Juni 2007 schrieb Clemens Koller:

Quoted 13 lines

Whenever I plug/unplug the FTDI FT232BM USB-RS232 converter, the latest 2.6.21.5 kernel complains:

usb 2-1: USB disconnect, address 7
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 ftdi_sio 2-1:1.0: device disconnected
usb 3-1: new full speed USB device using ohci_hcd and address 43 usb 3-1: configuration #1 chosen from 1 choice
ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected drivers/usb/serial/ftdi_sio.c: Detected FT232BM
usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
usbcore: exports duplicate symbol usb_buffer_unmap_sg (owned by kernel)
usbserial: exports duplicate symbol usb_serial_port_softint (owned by kernel)

Please rebuild your kernel and modules from scratch. It looks like you are mixing builds.

Regards
Oliver

#2 lore raw

Hi, Oliver!

Quoted 15 lines · Oliver Neukum

Am Mittwoch, 27. Juni 2007 schrieb Clemens Koller:

Quoted 13 lines

Whenever I plug/unplug the FTDI FT232BM USB-RS232 converter, the latest 2.6.21.5 kernel complains:

usb 2-1: USB disconnect, address 7
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 ftdi_sio 2-1:1.0: device disconnected
usb 3-1: new full speed USB device using ohci_hcd and address 43 usb 3-1: configuration #1 chosen from 1 choice
ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected drivers/usb/serial/ftdi_sio.c: Detected FT232BM
usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
usbcore: exports duplicate symbol usb_buffer_unmap_sg (owned by kernel)
usbserial: exports duplicate symbol usb_serial_port_softint (owned by kernel)

Quoted 2 lines

Please rebuild your kernel and modules from scratch. It looks like you are mixing builds.

Thanks, I will give it a try.

Signature · 10 lines
Clemens Koller
__________________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com
#3 lore raw
In reply to Oliver Neukum
Quoted 15 lines · Oliver Neukum

Am Mittwoch, 27. Juni 2007 schrieb Clemens Koller:

Quoted 13 lines

Whenever I plug/unplug the FTDI FT232BM USB-RS232 converter, the latest 2.6.21.5 kernel complains:

usb 2-1: USB disconnect, address 7
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 ftdi_sio 2-1:1.0: device disconnected
usb 3-1: new full speed USB device using ohci_hcd and address 43 usb 3-1: configuration #1 chosen from 1 choice
ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected drivers/usb/serial/ftdi_sio.c: Detected FT232BM
usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
usbcore: exports duplicate symbol usb_buffer_unmap_sg (owned by kernel)
usbserial: exports duplicate symbol usb_serial_port_softint (owned by kernel)

Quoted 2 lines

Please rebuild your kernel and modules from scratch. It looks like you are mixing builds.

Okay, I rebuilt the kernel in a new tree and cleaned up /lib/modules/* so, the problem is solved.

Thank you.

Signature · 10 lines
Clemens Koller
__________________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com