Problem with size after growing a device
Hi,
I don't know really which subsystem this, so I'm sending this to the linux-kernel list. Please direct me to a more appropriate place if this is not correct.
I'm using a 3ware 9500 with Linux 2.6.18.1. I've grown the HW raid5-array and here is where the problem begins. After the card had expanded the array, I used "blockdev --rereadpt /dev/sdk" to get the kernel to recognize the now larger device. The last step was to do a "pvresize /dev/sdk". The problem is that pvresize still thought that the device was at the original size.
From the lvm mailinglist I found out that pvresize used the same mechanism as "blockdev --getsz" to get the size of the disks, so I tested this and found that blockdev also reported the device to have the wrong size.
So, if I do:
# cat /sys/block/sdk/size 4882708480
and
# blockdev --getsz /dev/sdk 3906166784
Apparently /sys/block/sdk/size is updated with the new size, but whatever "blockdev --getsz" and "pvresize" is querying is not. If I reboot, everything works correctly.
Best Regards,
/LM
Ps. please keep me as Cc: on this; since I'm not subscibed to the linux-kernel list..
Quoted 6 lines · Lars Michael Jogbäck
Hi,
So, if I do:
# cat /sys/block/sdk/size 4882708480
Quoted 8 lines
and
# blockdev --getsz /dev/sdk 3906166784Apparently
/sys/block/sdk/sizeis updated with the new size, but whatever "blockdev --getsz" and "pvresize" is querying is not. If I reboot, everything works correctly.
I have mentioned this problem before with resizing non-partitioned devices, then trying to resize the filesystem.
I consider the issue a bug, because different parts of the kernel have a different size for the same device. It should be consistent, preferably with the new size being reported both by the sys fs and by blockdev (then hopefully xfs_growfs will work without a reboot).
Andy