Skip to contentSkip to conversation

kvm-29 release

ANNOUNCE Avi Kivity 4 participants 5 messages Jul 12, 2007 3 messages not in the archive KVM

lore
Share & tools
lore

Avi Kivity

author
#0 lore raw

Well, I really wanted to have guest smp in the release, but alas, it was not to be. It still doesn't like starting X, for example.

Note: on i386 the qemu binary is now named qemu-system-x86_64. This is to allow migration from 32-bit hosts to 64-bit hosts, and to allow 32-bit userspace on a 64-bit host to launch a 64-bit guest.

Changes from kvm-28:
- live migration from 32-bit hosts to 64-bit hosts (Uri Lublin)
- monotonic timestamp counter on Intel
- more real mode support (Nitin A Kamble)
- infrastructure for in-kernel PIC and APIC (Gregory Haskins, Eddie Dong)
- fix read-modify-write to mmio (fixes F7 installer) (Luca Tettamanti)
- fix rebooting a long-running guest
- reliably detect if svm was disabled by bios (Joerg Roedel)
- suspend/resumes fixes (will not work with older kernels)
- fix nx confusion with large pages and real mode
- remove dependency on libuuid
- fix registers access in monitor/gdbstub (Anthony Liguori)
- minor fixes and cleanups (various)

Notes:
If you use the modules from kvm-29, you can use any version of Linux
from 2.6.9 upwards.
If you use the modules from Linux 2.6.20, you need to use kvm-12. If you use the modules from Linux 2.6.21, you need to use kvm-17. Modules from Linux 2.6.22 and up will work with any kvm version from
kvm-22. Some features may only be available in newer releases.

http://kvm.qumranet.com

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

#2 lore raw

Framebuffer error

In reply to a message not in the archive

Hello,
I know this is not probably the place, but as I haven't found a
kvm-users list and probably some of you have encountered the same problem I feel it's the best place to post my problem. I have a macbook pro running Feisty with a Radeon Mobility X1600 and VMX cpu support and I was quite interested in trying kvm. I followed the steps of any of the online manuals, but I didn't get far. As soon as I tried to install Windows XP:

	kvm -no-acpi -m 384 -cdrom /dev/cdrom -boot d windows.img

	I obtained  the following output:
	
       ---------------------- DirectFB v0.9.25 ---------------------
             (c) 2000-2002  convergence integrated media GmbH  
             (c) 2002-2004  convergence GmbH                   
        -----------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2006-12-20 21:25) (*) Direct/Memcpy: Using MMX optimized memcpy()
(!) Direct/Util: opening '/dev/fb0' and '/dev/fb/0' failed

    --> No such file or directory
(!) DirectFB/FBDev: Error opening framebuffer device!
(!) DirectFB/FBDev: Use 'fbdev' option or set FRAMEBUFFER environment variable.
(!) DirectFB/Core: Could not initialize 'system' core!
    --> Initialization error!

Could not initialize SDL - exiting

I checked and couldn't find any framebuffer device in my computer. After
googling a lot, creating those devices manually, trying to boot with both the propietary and open source driver, loading the radeonfb module I haven't been able to avoid this problem. Could someone in the list enlighten me?

Best regards,
Víctor

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

author
#4 lore raw

Re: Framebuffer error

In reply to a message not in the archive
Quoted 25 lines · Víctor Abeytua García

Hello,
I know this is not probably the place, but as I haven't found a
kvm-users list and probably some of you have encountered the same problem I feel it's the best place to post my problem. I have a macbook pro running Feisty with a Radeon Mobility X1600 and VMX cpu support and I was quite interested in trying kvm. I followed the steps of any of the online manuals, but I didn't get far. As soon as I tried to install Windows XP:

	kvm -no-acpi -m 384 -cdrom /dev/cdrom -boot d windows.img

	I obtained  the following output:
	
       ---------------------- DirectFB v0.9.25 ---------------------
             (c) 2000-2002  convergence integrated media GmbH  
             (c) 2002-2004  convergence GmbH                   
        -----------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2006-12-20 21:25) (*) Direct/Memcpy: Using MMX optimized memcpy()
(!) Direct/Util: opening '/dev/fb0' and '/dev/fb/0' failed

    --> No such file or directory
(!) DirectFB/FBDev: Error opening framebuffer device!
(!) DirectFB/FBDev: Use 'fbdev' option or set FRAMEBUFFER environment variable.
(!) DirectFB/Core: Could not initialize 'system' core!
    --> Initialization error!
Quoted 7 lines

Could not initialize SDL - exiting

I checked and couldn't find any framebuffer device in my computer. After
googling a lot, creating those devices manually, trying to boot with both the propietary and open source driver, loading the radeonfb module I haven't been able to avoid this problem. Could someone in the list enlighten me?

This is strange. You're running in X, right? Is $DISPLAY set correctly? Maybe some other environment variable is telling SDL to use a framebuffer instead of X.

Signature · 8 lines
error compiling committee.c: too many arguments to function


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
#6 lore raw

Re: Framebuffer error

In reply to a message not in the archive

Thanks a lot,
I was looking at the wrong place. I was trying to launch the
installation as root after sudoing. And as root I didn't have the DISPLAY variable. Now the installation is proceeding smoothly.

Best regards,
Víctor

Quoted 50 lines · Avi Kivity
Quoted 32 lines · Víctor Abeytua García

Hello,
I know this is not probably the place, but as I haven't found a
kvm-users list and probably some of you have encountered the same problem I feel
it's the best place to post my problem. I have a macbook pro running Feisty
with a Radeon Mobility X1600 and VMX cpu support and I was quite interested in
trying kvm. I followed the steps of any of the online manuals, but I didn't get
far. As soon as I tried to install Windows XP:

	kvm -no-acpi -m 384 -cdrom /dev/cdrom -boot d windows.img

	I obtained  the following output:
	
      ---------------------- DirectFB v0.9.25 ---------------------
            (c) 2000-2002  convergence integrated media GmbH  
            (c) 2002-2004  convergence GmbH                   
       -----------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2006-12-20 21:25) (*) Direct/Memcpy: Using MMX optimized memcpy()
(!) Direct/Util: opening '/dev/fb0' and '/dev/fb/0' failed
--> No such file or directory
(!) DirectFB/FBDev: Error opening framebuffer device!
(!) DirectFB/FBDev: Use 'fbdev' option or set FRAMEBUFFER environment variable.
(!) DirectFB/Core: Could not initialize 'system' core!
--> Initialization error!
Could not initialize SDL - exiting

Quoted 8 lines

I checked and couldn't find any framebuffer device in my computer. After
googling a lot, creating those devices manually, trying to boot with both the
propietary and open source driver, loading the radeonfb module I haven't been
able to avoid this problem. Could someone in the list enlighten me?

This is strange. You're running in X, right? Is $DISPLAY set correctly? Maybe some other environment variable is telling SDL to use a framebuffer instead of X.

Signature · 1 line
error compiling committee.c: too many arguments to function
Signature · 18 lines
Víctor Abeytua García


-----------
Socio Consultor
Nosys AJjV S.L.
Networked Open SYStems
Tecnologías de la Información · Seguridad

C/ Isla Graciosa 2, Loft 18
28700 San Sebastián de los Reyes
Madrid (Spain)

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
#7 lore raw

Re: Framebuffer error

In reply to a message not in the archive

I had the same problem, I missed couple of SDL packages...

here is my package list under debian :

ii libsdl1.2-dev
1.2.11-8 Simple DirectMedia Layer development
files
ii libsdl1.2debian
1.2.11-8 Simple DirectMedia Layer
ii libsdl1.2debian-alsa
1.2.11-8 Simple DirectMedia Layer (with X11
and ALSA

also check the following file :
/sys/class/misc/kvm/dev

I had to create a file manually using mknod...

mknod /dev/kvm c (low and high number of the file above

hope this helps you out

Quoted 35 lines · Víctor Abeytua García

Hello,
I know this is not probably the place, but as I haven't found a
kvm-users list and probably some of you have encountered the same problem I feel it's the best place to post my problem. I have a macbook pro running Feisty with a Radeon Mobility X1600 and VMX cpu support and I was quite interested in trying kvm. I followed the steps of any of the online manuals, but I didn't get far. As soon as I tried to install Windows XP:

	kvm -no-acpi -m 384 -cdrom /dev/cdrom -boot d windows.img

	I obtained  the following output:
	
       ---------------------- DirectFB v0.9.25 ---------------------
             (c) 2000-2002  convergence integrated media GmbH  
             (c) 2002-2004  convergence GmbH                   
        -----------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2006-12-20 21:25) (*) Direct/Memcpy: Using MMX optimized memcpy()
(!) Direct/Util: opening '/dev/fb0' and '/dev/fb/0' failed

    --> No such file or directory
(!) DirectFB/FBDev: Error opening framebuffer device!
(!) DirectFB/FBDev: Use 'fbdev' option or set FRAMEBUFFER environment variable.
(!) DirectFB/Core: Could not initialize 'system' core!
    --> Initialization error!

Could not initialize SDL - exiting

I checked and couldn't find any framebuffer device in my computer. After
googling a lot, creating those devices manually, trying to boot with both the propietary and open source driver, loading the radeonfb module I haven't been able to avoid this problem. Could someone in the list enlighten me?

Best regards,
Víctor

Quoted 12 lines

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
kvm-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/kvm-devel

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/