82xx: Add the support for Wind River SBC PowerQUICCII

These 3 patches add the powerpc support of Wind River SBC PowerQUICCII.

1) Currently, some mpc82xx platform hooks in mpc82xx_ads.c are actually not specific to ads board. So the 1st patch makes them be shared by different 82xx boards.

2) The 2nd patch make 'cpm_uart_of_init' be able to parse SMC uart in DTS

3) The 3rd patch is the platform codes, defconfig and dts for Wind River SBC PowerQUICCII 82xx board.

Any comment is welcome.

Thanks
Mark Zhan

_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Quoted 3 lines · On Mon, 16 Jul 2007 17:01:28 +0800 Mark Zhan wrote:

These 3 patches add the powerpc support of Wind River SBC PowerQUICCII.

I am sorry, but this would intercept with big 8xx/82xx series from Scott Wood I am reviewing now. it makes the initial merged code more maintainable and powerpc-friendly, but would have some rework required in upcoming patches for new BSPs.

OTOH, it would make all the changes below very short and apparent.
Of course, if something would block those series this one can be considered to merge.

Quoted 19 lines

1) Currently, some mpc82xx platform hooks in mpc82xx_ads.c are actually not specific to ads board. So the 1st patch makes them be shared by different 82xx boards.

2) The 2nd patch make 'cpm_uart_of_init' be able to parse SMC uart in DTS

3) The 3rd patch is the platform codes, defconfig and dts for Wind River SBC PowerQUICCII 82xx board.

Any comment is welcome.

Thanks
Mark Zhan

_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Hi Vitaly,

When you will send out your 8xx/82xx series patches?

Thanks
Mark Zhan

Quoted 37 lines · Vitaly Bordug

Quoted 3 lines · On Mon, 16 Jul 2007 17:01:28 +0800 Mark Zhan wrote:

These 3 patches add the powerpc support of Wind River SBC PowerQUICCII.

I am sorry, but this would intercept with big 8xx/82xx series from Scott Wood I am reviewing now. it makes the initial merged code more maintainable and powerpc-friendly, but would have some rework required in upcoming patches for new BSPs.

OTOH, it would make all the changes below very short and apparent. Of course, if something would block those series this one can be considered to merge.

Quoted 19 lines

1) Currently, some mpc82xx platform hooks in mpc82xx_ads.c are actually not specific to ads board. So the 1st patch makes them be shared by different 82xx boards.

2) The 2nd patch make 'cpm_uart_of_init' be able to parse SMC uart in DTS

3) The 3rd patch is the platform codes, defconfig and dts for Wind River SBC PowerQUICCII 82xx board.

Any comment is welcome.

Thanks
Mark Zhan

_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev