Skip to contentSkip to conversation

linux 2.6.22 ide regression

DISCUSSION Stephen Clark 1 participant 1 message Jul 19, 2007 libata

lore
Share & tools
lore
#0 lore raw

Hello List

My HP N5430 Laptop used to be udma/66 under the old ide driver. Is there a way to get it back to that under the new drivers. The drive is plugged via a right angle connector directly to the mother board - in otherwords there is no cable.

scsi0 : pata_ali
scsi1 : pata_ali
ata1: PATA max UDMA/66 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011000 irq 14
ata2: PATA max UDMA/66 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011008 irq 15 ata1.00: ATA-5: HITACHI_DK23CA-20, 00H1A0A3, max UDMA/100 ata1.00: 39070080 sectors, multi 16: LBA
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33

Any help would be appreciated.

Regards,
Steve

Signature · 3 lines
"They that give up essential liberty to obtain temporary safety, deserve neither liberty nor safety."  (Ben Franklin)

"The course of history shows that as a government grows, liberty decreases."  (Thomas Jefferson)