SNDRV_PCM_FMTBIT_S24_LE vs. SNDRV_PCM_FMTBIT_S24_3LE
What is the difference between SNDRV_PCM_FMTBIT_S24_LE and SNDRV_PCM_FMTBIT_S24_3LE?
Signature · 2 lines
Timur Tabi Linux Kernel Developer @ Freescale
Quoted 2 lines · Timur Tabi
What is the difference between
SNDRV_PCM_FMTBIT_S24_LEandSNDRV_PCM_FMTBIT_S24_3LE?
SNDRV_PCM_FMTBIT_S24_LE is 24bit audio padded to fill 4 bytes. SNDRV_PCM_FMTBIT_S24_3LE is 24bit audio with no padding, thus taking only 3 types.
Quoted 6 lines
------------ Původní zpráva ------------
----------------------------------------
What is the difference betweenSNDRV_PCM_FMTBIT_S24_LEandSNDRV_PCM_FMTBIT_S24_3LE?
The asound.h says S24_LE is stored in lower three bytes of four, whereas S24_3LE is stored in three bytes total.
Pavel.
Quoted 11 lines
--
Timur Tabi
Linux Kernel Developer @ Freescale
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 5 lines · [email protected] wrote:
Quoted 2 lines
What is the difference between
SNDRV_PCM_FMTBIT_S24_LEandSNDRV_PCM_FMTBIT_S24_3LE?The
asound.hsaysS24_LEis stored in lower three bytes of four, whereasS24_3LEis stored in three bytes total.
To use a sample format with 24 bits stored in the upper three bytes of four, use S32_LE. In that case, you have to call "snd_pcm_hw_constraint_msbits(runtime, 0, 32, 24)" in the PCM open callback to tell ALSA that some of the lower bits aren't used.
HTH
Clemens