Skip to contentSkip to conversation

ethtool version 6 released

DISCUSSION Jeff Garzik 1 participant 1 message Jul 26, 2007

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

The yearly ethtool update is available (it doesn't see a lot of action) at its home page,

http://sf.net/projects/gkernel/

or directly via git SCM:

git://git.kernel.org/pub/scm/network/ethtool/ethtool.git

The release notes and full changelog (from git) are attached.

Jeff

Version 6 - July 26, 2007

* Fix/security: Fix handling of statistics where the label is exactly 32 bytes (ETH_GSTRING_LEN).
* Feature: Add ability to change the advertised speed/duplex to a different range of values, rather than all-or-one.
* Feature: ixgb register dump support
* Feature: sky2 register dump support
* Feature: Fabric7 VIOC register dump support
* Feature: Decode raw register dump stored in a file
* Feature: Add ability to force hex register dump, if desired
* Feature: update e1000 register dump
* Feature: Additional 10Gbps support
* Feature: Add 2.5G support
* Feature: Update r8169 register dump
* Feature: SMSC LAN911x/LAN921x register dump support
* Cleanup: Update internal ethtool.h copy to match upstream kernel 2.6.23-rc1 version of ethtool.h.

commit ee6a4ec9b23ae887d280f0f4eedb9a931f71d311

Author: Jeff Garzik <[email protected]>
Date:   Thu Jul 26 13:41:45 2007 -0400

Release version 6.

commit f45bb4faddffed6de1932105b17e28d48f9c3127

Author: Jeff Garzik <[email protected]>
Date:   Thu Jul 26 13:32:17 2007 -0400

Update embedded copy of ethtool.h from kernel 2.6.23-rc1.

commit ba2f54ba29ab2a9fee5529f161ce86215c3b1b0d

Author: Jeff Garzik <[email protected]>
Date:   Thu Jul 26 13:24:59 2007 -0400

Trim trailing whitespace.

commit a5f8ce23307719f03727f72f1d68007213de7d5c

Author: Steve Glendinning <[email protected]>
Date:   Mon Jul 16 20:04:40 2007 +0100

ethtool: add register dump support for SMSC LAN911x/LAN921x

This patch adds support for SMSC's LAN911x and LAN921x families of embedded ethernet controllers to ethtool's dump registers (-d) command.

This patch is for use with the smsc911x driver.

commit 3764dec8110409fd07def332732909ba84fec752

Author: Francois Romieu <[email protected]>
Date:   Wed May 30 13:44:03 2007 +0200

ethtool: new ID to decode the registers of the 8101E (realtek)

commit fed21029f02c970c6affaafa4a9294fce2775f40

Author: Francois Romieu <[email protected]>
Date:   Thu May 24 22:02:42 2007 +0200

ethtool: new ID to decode the registers of the 8168 (realtek)

Tested with an Asrock 945G-DVI (LOM).

commit 029cce110c4e5297bbe3f946868e32820e842856

Author: Michael Chan <[email protected]>
Date:   Thu May 3 00:27:10 2007 -0700

ethtool: Add 2.5G support

Add 2.5G Serdes support to ethtool user program and ethtool.8 man page. The missing pause bits are also added to keep ethtool-copy.h in sync with the kernel's version.

commit 06759c2e613e608038836d0ab7f21eb07570d355

Author: Stephen Hemminger <[email protected]>
Date:   Wed Apr 4 13:41:16 2007 -0700

ethtool: add 88e807X chip to decode

Add decode for Yukon Extreme chip

commit 9896cd5012e6c76cb5978da424888a06fa666ff4

Author: Stephen Hemminger <[email protected]>
Date:   Wed Apr 4 13:40:15 2007 -0700

ethtool: marvell chip version decode fix

The chip revision wasn't being decoded properly.

commit ec45cbae2eefffa770f5cf5729a0b5410963b7b8

Author: Rick Jones <[email protected]>
Date:   Wed Apr 4 17:33:08 2007 -0700

ethtool: additional 10Gig niceness

teach ethtool to print "10000Mb/s" for a 10G NIC and prepare for 10G NICs where it is possible to run something other than 10G update the ethtool.8 manpage with info re same and some grammar fixes

commit 0be59452b155b2b79980d809fbcb435de4b6e799

Author: Stephen Hemminger <[email protected]>
Date:   Wed Jan 31 16:23:46 2007 -0800

marvell chip decode formatting

Fix some typo's and formatting on Marvell ethtool output. If sync transmit queue is not used, don't print settings.

commit 96144b87a89d72eafb227a69103a74d49975fb44

Author: Auke Kok <[email protected]>
Date:   Fri Jan 19 14:49:57 2007 -0800

e1000: update device ID table for register dumps

e1000: update device ID table for register dumps with new devices

From: Auke Kok <[email protected]>

The register dump routine of e1000 was missing several newer chipsets. I reimported the mac detection code from the linux e1000 driver. This fixes newer NIC's reporting that their bus type is PCI instead of PCI-e.

commit 7764430a139e4a089127f5616b0d56f497be1036

Author: Stephen Hemminger <[email protected]>
Date:   Thu Jan 11 15:36:10 2007 -0800

ethtool: fix long statistics name

Fix handling of statistics where the label is exactly 32 (ETH_GSTRING_LEN) characters long (observed with chelsio 10G driver).
Before it would print garbage because of going by end
of string. Don't need to copy string, just use formats properly.

commit 5ab06db9d8777aef9307357b49d94cc267ba8105

Author: Stephen Hemminger <[email protected]>
Date:   Mon Oct 23 10:58:37 2006 -0700

ethtool: allow force hex in register dump

Sometimes the device decode logic just gets in the way so add a "force hex" option to register dump.

commit fd3dc7be2449dc1b7950fcf22dbc2cf5a6504fa2

Author: Stephen Hemminger <[email protected]>
Date:   Mon Oct 23 10:57:03 2006 -0700

ethtool: flie option to register dump

Add ability to take old raw dumps from a file and decode them. It is kind of limited because you still need to have same device as the raw file, but useful for maintainers to decode raw dumps.

commit b9caefa09afc12072e8beee0596be19384e7a21f

Author: Stephen Hemminger <[email protected]>
Date:   Mon Oct 23 10:51:42 2006 -0700

[PATCH] ethtool: marvell register dump

This is a consolidation of earlier marvell register decode patches to ethtool.

commit 12b0c64313c96d87dfc08254fd4e9544e45f5b18

Author: Sriram Chidambaram <[email protected]>
Date:   Tue Oct 24 15:07:27 2006 -0700

[PATCH] Fabric7 VIOC: Ethtool

Removed debug print statement

commit 8babd795f6bcbf9b21e31c43ce53bd0654974488

Author: Sriram Chidambaram <[email protected]>
Date:   Tue Oct 24 14:30:41 2006 -0700

[PATCH] Fabric7 VIOC: Ethtool

Ethtool patch for Fabric7 VIOC Device Driver.

commit ee35083398b3497d627a14b51e97c23c243d4f6b

Author: Stephen Hemminger <[email protected]>
Date:   Fri Oct 6 15:45:41 2006 -0700

[PATCH] ethtool: sky2 more decode

Add some more decoding of Rx FIFO bits

commit aa60a2982e3f9cdf1307c105cb9f298e0e10a99b

Author: Stephen Hemminger <[email protected]>
Date:   Tue Sep 26 13:10:52 2006 -0700

[PATCH] ethtool: spelling fix

Fix my bogus spelling.

commit ad702599947629f096b698b6d0f9ba7f24b27cce

Author: Stephen Hemminger <[email protected]>
Date:   Tue Sep 26 13:09:14 2006 -0700

[PATCH] ethtool: sky2 support

Add full support for sky2 chip

commit 2d50690d76353f1a954f7f632e0894d124cc9241

Author: Stephen Hemminger <[email protected]>
Date:   Tue Sep 26 13:08:25 2006 -0700

[PATCH] ethtool: move skge.c to marvell.c

The code will be common for skge and sky2

commit 6763e2b61d134ecb2b9c9732c25963e52afab54b

Author: Jeff Garzik <[email protected]>
Date:   Tue Sep 19 15:05:55 2006 -0400

ixgb: Trim trailing whitespace.

commit fb522ac8e761a669c88e03a9e23b4204a36217c7

Author: Nicholas Nunley <[email protected]>
Date:   Tue Sep 19 11:27:35 2006 -0700

[PATCH] ethtool: add ixgb register dump support

This adds support for dumping ixgb registers in readable format.

commit 5860312ac4ae67da856df19b31bd26ada6927955
Merge: 9fecbca... bfcb014...
Author: Jeff Garzik <[email protected]>
Date: Tue Sep 19 15:04:17 2006 -0400

Merge branch 'e1000' of git://lost.foo-projects.org/~jtkirshe/ethtool into tmp

commit 9fecbca7a032cd644d76a8b35ae4fe743e7b2b16

Author: Auke Kok <[email protected]>
Date:   Fri Sep 8 16:13:30 2006 -0700

[PATCH] ethtool: e1000: fix a typo

commit bfcb014b3b18dce0e3f744b0ad919eef47b9d25d

Author: Jeff Kirsher <[email protected]>
Date:   Wed Sep 6 09:38:39 2006 -0700

ethtool v5: add autoneg advertise feature

adds the ability to change the advertised speed and duplex for a network interface. Previously, a network interface was only able to advertise all supported speed's and duplex's, or one individual speed and duplex. The feature allows the user to choose which supported speed's and duplex's to advertise by using the hex value.