Skip to contentSkip to conversation

Typo fixes interrrupt -> interrupt

PATCH In review Gabriel C 2 participants 4 messages Aug 1, 2007 PowerPC

lore
Share & tools
lore

Gabriel C

author
#0 lore raw

PATCH 1/1 Typo fixes interrrupt -> interrupt

Hi,

This patch fixes some interrrupt -> interrupt typos and the comments in it_lp_naca.h

Signed-off-by Gabriel Craciunescu <[email protected]>

---

 arch/powerpc/platforms/embedded6xx/holly.c        |    2 +-
 arch/powerpc/platforms/embedded6xx/linkstation.c  |    2 +-
 arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c |    2 +-
 arch/powerpc/platforms/iseries/it_lp_naca.h       |   87 +++++++++++----------
 include/asm-ppc/commproc.h                        |    2 +-
 5 files changed, 49 insertions(+), 46 deletions(-)
arch/powerpc/platforms/embedded6xx/holly.c +1 -1
index 6292e36..fda16e8 100644
@@ -147,7 +147,7 @@ static void __init holly_setup_arch(void)
 }
 
 /*
- * Interrupt setup and service.  Interrrupts on the holly come
+ * Interrupt setup and service.  Interrupts on the holly come
  * from the four external INT pins, PCI interrupts are routed via
  * PCI interrupt control registers, it generates internal IRQ23
  *
arch/powerpc/platforms/embedded6xx/linkstation.c +1 -1
index bd5ca58..8c60e02 100644
@@ -99,7 +99,7 @@ static void __init linkstation_setup_arch(void)
 }
 
 /*
- * Interrupt setup and service.  Interrrupts on the linkstation come
+ * Interrupt setup and service.  Interrupts on the linkstation come
  * from the four PCI slots plus onboard 8241 devices: I2C, DUART.
  */
 static void __init linkstation_init_IRQ(void)
arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +1 -1
index 1e3cc69..25c29bc 100644
@@ -91,7 +91,7 @@ static void __init mpc7448_hpc2_setup_arch(void)
 }
 
 /*
- * Interrupt setup and service.  Interrrupts on the mpc7448_hpc2 come
+ * Interrupt setup and service.  Interrupts on the mpc7448_hpc2 come
  * from the four external INT pins, PCI interrupts are routed via
  * PCI interrupt control registers, it generates internal IRQ23
  *
arch/powerpc/platforms/iseries/it_lp_naca.h +45 -42

98 lines not on this page · raw message

include/asm-ppc/commproc.h +1 -1
index 3972487..462abb1 100644
@@ -681,7 +681,7 @@ typedef struct risc_timer_pram {
 #define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
 #define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
 #define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
-#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrrupt */
+#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrupt */
 #define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
 #define CICR_IEN		((uint)0x00000080)	/* Int. enable */
 #define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
#1 lore raw
Quoted 2 lines · On Wed, 01 Aug 2007 05:16:27 +0200 Gabriel C <[email protected]> wrote:
 arch/powerpc/platforms/iseries/it_lp_naca.h       |   87 +++++++++++----------

NAK this part as it just makes a lot of the lines more than 80 characters for no real gain on a platform that is moving on ...

Signature · 3 lines
Cheers,
Stephen Rothwell                    [email protected]
http://www.canb.auug.org.au/~sfr/
author
#2 lore raw
Quoted 5 lines · Stephen Rothwell
Quoted 1 line · On Wed, 01 Aug 2007 05:16:27 +0200 Gabriel C <[email protected]> wrote:
 arch/powerpc/platforms/iseries/it_lp_naca.h       |   87 +++++++++++----------

NAK this part as it just makes a lot of the lines more than 80 characters for no real gain on a platform that is moving on ...

Well some were there before but with the wrong comment style.

I'll send an new patch in a bit without the comments fixes.

Gabriel

author
#3 lore raw

Re: [PATCH] [POWERPC] Typo fixes interrrupt -> interrupt ( try 2 )

In reply to Stephen Rothwell

This patch fixes some interrrupt -> interrupt typos

Signed-off-by Gabriel Craciunescu <[email protected]>

---

 arch/powerpc/platforms/embedded6xx/holly.c        |    2 +-
 arch/powerpc/platforms/embedded6xx/linkstation.c  |    2 +-
 arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c |    2 +-
 arch/powerpc/platforms/iseries/it_lp_naca.h       |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
arch/powerpc/platforms/embedded6xx/holly.c +1 -1
index 6292e36..fda16e8 100644
@@ -147,7 +147,7 @@ static void __init holly_setup_arch(void)
 }
 
 /*
- * Interrupt setup and service.  Interrrupts on the holly come
+ * Interrupt setup and service.  Interrupts on the holly come
  * from the four external INT pins, PCI interrupts are routed via
  * PCI interrupt control registers, it generates internal IRQ23
  *
arch/powerpc/platforms/embedded6xx/linkstation.c +1 -1
index bd5ca58..8c60e02 100644
@@ -99,7 +99,7 @@ static void __init linkstation_setup_arch(void)
 }
 
 /*
- * Interrupt setup and service.  Interrrupts on the linkstation come
+ * Interrupt setup and service.  Interrupts on the linkstation come
  * from the four PCI slots plus onboard 8241 devices: I2C, DUART.
  */
 static void __init linkstation_init_IRQ(void)
arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +1 -1
index 1e3cc69..25c29bc 100644
@@ -91,7 +91,7 @@ static void __init mpc7448_hpc2_setup_arch(void)
 }
 
 /*
- * Interrupt setup and service.  Interrrupts on the mpc7448_hpc2 come
+ * Interrupt setup and service.  Interrupts on the mpc7448_hpc2 come
  * from the four external INT pins, PCI interrupts are routed via
  * PCI interrupt control registers, it generates internal IRQ23
  *
arch/powerpc/platforms/iseries/it_lp_naca.h +1 -1
index 9bbf589..cf6dcf6 100644
@@ -60,7 +60,7 @@ struct ItLpNaca {
 	u8	xRsvd2_0[128];		// Reserved			x00-x7F
 
 // CACHE_LINE_3-6 0x0100 - 0x02FF Contains LP Queue indicators
-// NB: Padding required to keep xInterrruptHdlr at x300 which is required
+// NB: Padding required to keep xInterruptHdlr at x300 which is required
 // for v4r4 PLIC.
 	u8	xOldLpQueue[128];	// LP Queue needed for v4r4	100-17F
 	u8	xRsvd3_0[384];		// Reserved			180-2FF