pm3fb: checkpatch fixes
PATCH 11/11 pm3fb: checkpatch fixes
From: Krzysztof Helt <[email protected]>
This patch fixes all errors detected by checkpatch.pl script in the pm3fb.c file.
Signed-off-by Krzysztof Helt <[email protected]>
Signed-off-by Antonino Daplas <[email protected]>
---
drivers/video/pm3fb.c | 152 ++++++++++++++++++++++++++----------------------- 1 files changed, 82 insertions(+), 70 deletions(-)
drivers/video/pm3fb.c +82 -70
@@ -44,9 +44,10 @@ #endif#undef PM3FB_MASTER_DEBUG#ifdef PM3FB_MASTER_DEBUG -#define DPRINTK(a,b...) printk(KERN_DEBUG "pm3fb: %s: " a, __FUNCTION__ , ## b) +#define DPRINTK(a, b...) \ + printk(KERN_DEBUG "pm3fb: %s: " a, __FUNCTION__ , ## b)#else -#define DPRINTK(a,b...) +#define DPRINTK(a, b...)#endif #define PM3_PIXMAP_SIZE (2048 * 4)
@@ -55,11 +56,11 @@ #define PM3_PIXMAP_SIZE (2048 * 4)* Driver data */ static char *mode_option__devinitdata ; -static int noaccel__devinitdata =0 ; +static int noaccel__devinitdata ;/* mtrr option */ #ifdef CONFIG_MTRR -static int nomtrr__devinitdata =0 ; +static int nomtrr__devinitdata ;#endif /*
@@ -72,7 +73,7 @@ #endifstruct pm3_par {unsigned char __iomem *v_regs;/* virtual address of p_regs */ u32 video;/* video flags before blanking */ -u32 base;/* screen base (xoffset+yoffset) in 128 bits unit */ +u32 base;/* screen base in 128 bits unit */ u32 palette[16 ];int mtrr_handle; };
@@ -376,7 +377,7 @@ #endifpm3fb_sync (info); } -static void pm3fb_fillrect (struct fb_info *info, +static void pm3fb_fillrect (struct fb_info *info,const struct fb_fillrect *region) {struct pm3_par *par = info->par;
@@ -384,7 +385,7 @@ static void pm3fb_fillrect (struct fb_inint vxres, vyres;int rop;u32 color = (info->fix.visual ==FB_VISUAL_TRUECOLOR ) ? - ((u32 *)info->pseudo_palette)[region->color] : region->color; + ((u32 *)info->pseudo_palette)[region->color] : region->color;if (info->state !=FBINFO_STATE_RUNNING )return ;
@@ -403,18 +404,18 @@ static void pm3fb_fillrect (struct fb_inmemcpy (&modded, region,sizeof (struct fb_fillrect )); -if (!modded.width || !modded.height || - modded.dx >= vxres || modded.dy >= vyres) +if (!modded.width || !modded.height || + modded.dx >= vxres || modded.dy >= vyres)return ; -if (modded.dx + modded.width > vxres) +if (modded.dx + modded.width > vxres) modded.width = vxres - modded.dx; -if (modded.dy + modded.height > vyres) +if (modded.dy + modded.height > vyres) modded.height = vyres - modded.dy; -if (info->var.bits_per_pixel ==8 ) +if (info->var.bits_per_pixel ==8 ) color |= color <<8 ; -if (info->var.bits_per_pixel <=16 ) +if (info->var.bits_per_pixel <=16 ) color |= color <<16 ;PM3_WAIT (par,4 );
@@ -460,18 +461,18 @@ static void pm3fb_copyarea(struct fb_inf vxres = info->var.xres_virtual; vyres = info->var.yres_virtual; -if (!modded.width || !modded.height || - modded.sx >= vxres || modded.sy >= vyres || - modded.dx >= vxres || modded.dy >= vyres) +if (!modded.width || !modded.height || + modded.sx >= vxres || modded.sy >= vyres || + modded.dx >= vxres || modded.dy >= vyres)return ; -if (modded.sx + modded.width > vxres) +if (modded.sx + modded.width > vxres) modded.width = vxres - modded.sx; -if (modded.dx + modded.width > vxres) +if (modded.dx + modded.width > vxres) modded.width = vxres - modded.dx; -if (modded.sy + modded.height > vyres) +if (modded.sy + modded.height > vyres) modded.height = vyres - modded.sy; -if (modded.dy + modded.height > vyres) +if (modded.dy + modded.height > vyres) modded.height = vyres - modded.dy; o_x = modded.sx - modded.dx;/*(sx > dx ) ? (sx - dx) : (dx - sx); */
@@ -517,7 +518,7 @@ static void pm3fb_imageblit(struct fb_instruct pm3_par *par = info->par;u32 height = image->height;u32 fgx, bgx; -const u32 *src = (const u32 *)image->data; +const u32 *src = (const u32 *)image->data;if (info->state !=FBINFO_STATE_RUNNING )return ;
@@ -526,19 +527,19 @@ static void pm3fb_imageblit(struct fb_inreturn ; }switch (info->fix.visual) { -case FB_VISUAL_PSEUDOCOLOR : - fgx = image->fg_color; - bgx = image->bg_color; -break ; -case FB_VISUAL_TRUECOLOR : -default : - fgx = par->palette[image->fg_color]; - bgx = par->palette[image->bg_color]; -break ; +case FB_VISUAL_PSEUDOCOLOR : + fgx = image->fg_color; + bgx = image->bg_color; +break ; +case FB_VISUAL_TRUECOLOR : +default : + fgx = par->palette[image->fg_color]; + bgx = par->palette[image->bg_color]; +break ; } -if (image->depth !=1 ) { +if (image->depth !=1 )return cfb_imageblit (info, image); - } +if (info->var.bits_per_pixel ==8 ) { fgx |= fgx <<8 ; bgx |= bgx <<8 ;
@@ -607,7 +608,8 @@ static void pm3fb_imageblit(struct fb_instatic void pm3fb_write_mode (struct fb_info *info) {struct pm3_par *par = info->par; -char tempsync =0x00 , tempmisc =0x00 ; +char tempsync =0x00 ; +char tempmisc =0x00 ;const u32 hsstart = info->var.right_margin;const u32 hsend = hsstart + info->var.hsync_len;const u32 hbend = hsend + info->var.left_margin;
@@ -809,44 +811,54 @@ static int pm3fb_check_var(struct fb_varif (bpp != var->bits_per_pixel) {/* set predefined mode for bits_per_pixel settings */ -switch (var->bits_per_pixel) { +switch (var->bits_per_pixel) {case 8 : - var->red.length = var->green.length = var->blue.length =8 ; - var->red.offset = var->green.offset = var->blue.offset =0 ; + var->red.length =8 ; + var->green.length =8 ; + var->blue.length =8 ; + var->red.offset =0 ; + var->green.offset =0 ; + var->blue.offset =0 ; var->transp.offset =0 ; var->transp.length =0 ;break ;case 16 : - var->red.length = var->blue.length =5 ; + var->red.length =5 ; + var->blue.length =5 ; var->green.length =6 ; var->transp.length =0 ;break ;case 32 : - var->red.length = var->green.length = var->blue.length =8 ; + var->red.length =8 ; + var->green.length =8 ; + var->blue.length =8 ; var->transp.length =8 ;break ;default : -DPRINTK ("depth not supported: %u\n" , var->bits_per_pixel); +DPRINTK ("depth not supported: %u\n" , + var->bits_per_pixel);return -EINVAL ; } }/* it is assumed BGRA order */ -if (var->bits_per_pixel >8 ) - { +if (var->bits_per_pixel >8 ) { var->blue.offset =0 ; var->green.offset = var->blue.length; var->red.offset = var->green.offset + var->green.length; var->transp.offset = var->red.offset + var->red.length; } - var->height = var->width =-1 ; + var->height =-1 ; + var->width =-1 ;if (var->xres != var->xres_virtual) { -DPRINTK ("virtual x resolution != physical x resolution not supported\n" ); +DPRINTK ("virtual x resolution != " +"physical x resolution not supported\n" );return -EINVAL ; }if (var->yres > var->yres_virtual) { -DPRINTK ("virtual y resolution < physical y resolution not possible\n" ); +DPRINTK ("virtual y resolution < " +"physical y resolution not possible\n" );return -EINVAL ; }
@@ -880,7 +892,8 @@ static int pm3fb_check_var(struct fb_var }if (PICOS2KHZ (var->pixclock) >PM3_MAX_PIXCLOCK ) { -DPRINTK ("pixclock too high (%ldKHz)\n" ,PICOS2KHZ (var->pixclock)); +DPRINTK ("pixclock too high (%ldKHz)\n" , +PICOS2KHZ (var->pixclock));return -EINVAL ; }
@@ -897,7 +910,7 @@ static int pm3fb_set_par(struct fb_infoconst u32 xres = (info->var.xres +31 ) & ~31 ;const unsigned bpp = info->var.bits_per_pixel; - par->base =pm3fb_shift_bpp (bpp,(info->var.yoffset * xres) + par->base =pm3fb_shift_bpp (bpp, (info->var.yoffset * xres) + info->var.xoffset); par->video =0 ;
@@ -956,10 +969,9 @@ static int pm3fb_setcolreg(unsigned regnreturn -EINVAL ;/* grayscale works only partially under directcolor */ -if (info->var.grayscale) { -/* grayscale = 0.30*R + 0.59*G + 0.11*B */ +/* grayscale = 0.30*R + 0.59*G + 0.11*B */ +if (info->var.grayscale) red = green = blue = (red *77 + green *151 + blue *28 ) >>8 ; - }/* Directcolor: * var->{color}.offset contains start of bitfield
@@ -973,8 +985,8 @@ static int pm3fb_setcolreg(unsigned regn* * Pseudocolor: * var->{color}.offset is 0 -* var->{color}.length contains width of DAC or the number of unique -* colors available (color depth) +* var->{color}.length contains width of DAC or the number +* of unique colors available (color depth) * pseudo_palette is not used * RAMDAC[X] is programmed to (red, green, blue) * color depth = var->{color}.length
@@ -984,7 +996,7 @@ static int pm3fb_setcolreg(unsigned regn* This is the point where the color is converted to something that * is acceptable by the hardware. */ -#define CNVT_TOHW (val,width) ((((val)<<(width))+0x7FFF-(val))>>16) +#define CNVT_TOHW (val, width) ((((val) << (width)) + 0x7FFF - (val)) >> 16) red =CNVT_TOHW (red, info->var.red.length); green =CNVT_TOHW (green, info->var.green.length); blue =CNVT_TOHW (blue, info->var.blue.length);
@@ -1008,12 +1020,11 @@ #undef CNVT_TOHWbreak ;case 16 :case 32 : - ((u32 *)(info->pseudo_palette))[regno] = v; + ((u32 *)(info->pseudo_palette))[regno] = v;break ; }return 0 ; - } -else if (info->fix.visual ==FB_VISUAL_PSEUDOCOLOR ) + }else if (info->fix.visual ==FB_VISUAL_PSEUDOCOLOR )pm3fb_set_color (par, regno, red, green, blue);return 0 ;
@@ -1075,7 +1086,7 @@ static int pm3fb_blank(int blank_mode, s }PM3_WAIT (par,1 ); -PM3_WRITE_REG (par,PM3VideoControl, video); +PM3_WRITE_REG (par, PM3VideoControl, video);return 0 ; }
@@ -1106,7 +1117,8 @@ static struct fb_ops pm3fb_ops = {/* the pm3fb_fix.smem_start is also set */ static unsigned long pm3fb_size_memory (struct pm3_par *par) { -unsigned long memsize =0 , tempBypass, i, temp1, temp2; +unsigned long memsize =0 ; +unsigned long tempBypass, i, temp1, temp2;unsigned char __iomem *screen_mem; pm3fb_fix.smem_len =64 *1024l *1024 ;/* request full aperture size */
@@ -1134,7 +1146,9 @@ static unsigned long pm3fb_size_memory(sPM3_WAIT (par,1 );PM3_WRITE_REG (par, PM3MemBypassWriteMask,0xFFFFFFFF ); -/* pm3 split up memory, replicates, and do a lot of nasty stuff IMHO ;-) */ +/* pm3 split up memory, replicates, and do a lot of +* nasty stuff IMHO ;-) +*/ for (i =0 ; i <32 ; i++) {fb_writel (i *0x00345678 , (screen_mem + (i *1048576 )));
@@ -1191,8 +1205,9 @@ static int __devinit pm3fb_probe(struct {struct fb_info *info;struct pm3_par *par; -struct device * device = &dev->dev;/* for pci drivers */ -int err, retval = -ENXIO ; +struct device *device = &dev->dev;/* for pci drivers */ +int err; +int retval = -ENXIO ; err =pci_enable_device (dev);if (err) {
@@ -1237,8 +1252,7 @@ #endif/* Linear frame buffer - request region and map it. */ pm3fb_fix.smem_start =pci_resource_start (dev,1 ); pm3fb_fix.smem_len =pm3fb_size_memory (par); -if (!pm3fb_fix.smem_len) - { +if (!pm3fb_fix.smem_len) {printk (KERN_WARNING "pm3fb: Can't find memory on board.\n" ); goto err_exit_mmio; }
@@ -1257,11 +1271,10 @@ #endif info->screen_size = pm3fb_fix.smem_len;#ifdef CONFIG_MTRR -if (!nomtrr) { +if (!nomtrr) par->mtrr_handle =mtrr_add (pm3fb_fix.smem_start, pm3fb_fix.smem_len,MTRR_TYPE_WRCOMB ,1 ); - }#endif info->fbops = &pm3fb_ops;
@@ -1277,8 +1290,8 @@ #endifFBINFO_HWACCEL_FILLRECT ;if (noaccel) { -printk (KERN_DEBUG "disabling acceleration\n" ); - info->flags |=FBINFO_HWACCEL_DISABLED ; +printk (KERN_DEBUG "disabling acceleration\n" ); + info->flags |=FBINFO_HWACCEL_DISABLED ; } info->pixmap.addr =kmalloc (PM3_PIXMAP_SIZE ,GFP_KERNEL );if (!info->pixmap.addr) {
@@ -1405,15 +1418,14 @@ static int __init pm3fb_setup(char *optiwhile ((this_opt =strsep (&options,"," )) !=NULL ) {if (!*this_opt)continue ; -else if (!strncmp (this_opt,"noaccel" ,7 )) { +else if (!strncmp (this_opt,"noaccel" ,7 )) noaccel =1 ;#ifdef CONFIG_MTRR - }else if (!strncmp (this_opt,"nomtrr" ,6 )) { + else if (!strncmp(this_opt, "nomtrr", 6)) nomtrr =1 ;#endif - }else { + else mode_option = this_opt; - } }return 0 ; }
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/