Skip to contentSkip to conversation

unknown card info [snd-bt87x]

DISCUSSION Vincent Minder 2 participants 2 messages Aug 12, 2007 – Aug 22, 2007

lore
Share & tools
lore
#0 lore raw

Hello,

After loading the snd-bt87x module on my Fedora 7 x86_64 box, here is what I found in the dmesg output:

unknown card 0x878-0xbd11:0x1200, using default rate 32000 please mail id, board name, and, if it works, the correct digital_rate option to <[email protected]>

The card is a rather old and cheap "PINNACLE systems - Studio PCTV rave" The chip on the board is from Conexant:
CONEXANT Fusion 878A (chip markings: 25878-13, E32673.1, 0023 KOREA) The card standard is PAL B/G. I think this model supports only MONO audio. It has TV-in, Audio-out (mini jack), Composite-in, S-VIDEO-in.

TV playback is working all right (tested with "kdetv" and "tvtime"). I have sound as long as I use the Audio-out connector and bridge it to my motherboard's integrated audio Line-in .
However, I didn't manage to use the internal audio capabities of that board. So I have no clue about the "correct digital_rate". (I must admit I am not familiar with these technologies at all.)

Here is the output of "arecord -l" regarding this card:

$ arecord -l
**** List of CAPTURE Hardware Devices ****
(...)
card 2: Bt878 [Brooktree Bt878], device 0: Bt87x Digital [Bt87x Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: Bt878 [Brooktree Bt878], device 1: Bt87x Analog [Bt87x Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

I am using the stock Alsa package of Fedora 7 x86_64 (fully updated distribution):
alsa-lib-1.0.14-1.fc7

I hope this report will be useful to you.
Sincerely,

Vincent Minder
(Belgium)

#1 lore raw

At Sun, 12 Aug 2007 21:03:43 +0200,

Quoted 16 lines · Vincent Minder

Hello,

After loading the snd-bt87x module on my Fedora 7 x86_64 box, here is what I found in the dmesg output:

unknown card 0x878-0xbd11:0x1200, using default rate 32000 please mail id, board name, and, if it works, the correct digital_rate option to <[email protected]>

The card is a rather old and cheap "PINNACLE systems - Studio PCTV rave" The chip on the board is from Conexant:
CONEXANT Fusion 878A (chip markings: 25878-13, E32673.1, 0023 KOREA) The card standard is PAL B/G. I think this model supports only MONO audio. It has TV-in, Audio-out (mini jack), Composite-in, S-VIDEO-in.

Quoted 6 lines

TV playback is working all right (tested with "kdetv" and "tvtime"). I have sound as long as I use the Audio-out connector and bridge it to my motherboard's integrated audio Line-in .
However, I didn't manage to use the internal audio capabities of that board. So I have no clue about the "correct digital_rate". (I must admit I am not familiar with these technologies at all.)

Thanks, I added your entry now to ALSA HG tree.

Takashi