Index: linux-omap/drivers/mmc/host/omap.c
===================================================================
@@ -875,13 +875,12 @@ static inline void set_cmd_timeout(struc
 
 static inline void set_data_timeout(struct mmc_omap_host *host, struct mmc_request *req)
 {
-	int timeout;
+	unsigned int timeout, cycle_ns;
 	u16 reg;
 
-	/* Convert ns to clock cycles by assuming 20MHz frequency
-	 * 1 cycle at 20MHz = 500 ns
-	 */
-	timeout = req->data->timeout_clks + req->data->timeout_ns / 500;
+	cycle_ns = 1000000000 / host->current_slot->fclk_freq;
+	timeout = req->data->timeout_ns / cycle_ns;
+	timeout += req->data->timeout_clks;
 
 	/* Check if we need to use timeout multiplier register */
 	reg = OMAP_MMC_READ(host, SDIO);

@@ -1051,7 +1050,8 @@ static void mmc_omap_power(struct mmc_om
 
 static int mmc_omap_calc_divisor(struct mmc_host *mmc, struct mmc_ios *ios)
 {
-	struct mmc_omap_host *host = mmc_priv(mmc);
+	struct mmc_omap_slot *slot = mmc_priv(mmc);
+	struct mmc_omap_host *host = slot->host;
 	int func_clk_rate = clk_get_rate(host->fclk);
 	int dsor;

@@ -1068,6 +1068,8 @@ static int mmc_omap_calc_divisor(struct 
 	if (dsor > 250)
 		dsor = 250;
 
+	slot->fclk_freq = func_clk_rate / dsor;
+
 	if (ios->bus_width == MMC_BUS_WIDTH_4)
 		dsor |= 1 << 15;