Skip to contentSkip to conversation

Unable to open plughw:0,0 from user program.

DISCUSSION stan 3 participants 8 messages Aug 23, 2007

lore
Share & tools
lore

stan

author
#0 lore raw

Hi,

I am unable to use plughw:0,0 as a device string while calling err = snd_pcm_open (&alsa_dev, hw_from_default, SND_PCM_STREAM_PLAYBACK, 0);

The same call works with hw_from_default == 'default', but fails when it is 'plughw:0,0'.
The error is
cannot open audio device "plughw:0,0" (Device or resource busy)

I am using the latest snapshot of alsa-lib, alsa-lib20070821. I tried debugging but I cannot trace through the macros. As near as I can tell there have been no changes to alsa.conf, and this worked just fine before the latest upgrade alsa package alsa-lib.1.0.14-3

Is this a deliberate change in alsa that is known about, and is there a way to still get the functionality?

Thanks.

author
#1 lore raw
Quoted 16 lines · stan

Hi,

I am unable to use plughw:0,0 as a device string while calling err = snd_pcm_open (&alsa_dev, hw_from_default, SND_PCM_STREAM_PLAYBACK, 0);

The same call works with hw_from_default == 'default', but fails when it is 'plughw:0,0'.
The error is
cannot open audio device "plughw:0,0" (Device or resource busy)

I am using the latest snapshot of alsa-lib, alsa-lib20070821. I tried debugging but I cannot trace through the macros. As near as I can tell there have been no changes to alsa.conf, and this worked just fine before the latest upgrade alsa package alsa-lib.1.0.14-3

Quoted 5 lines

Is this a deliberate change in alsa that is known about, and is there a way to still get the functionality?

Thanks.

Forgot to mention that this is on Fedora Rawhide with a 2.6.23 kernel. Want to see if it is normal in the latest versions of alsa before I pursue it through bugzilla with Fedora.

#2 lore raw
In reply to stan

At Thu, 23 Aug 2007 11:44:56 -0700,

Quoted 10 lines · stan

Hi,

I am unable to use plughw:0,0 as a device string while calling err = snd_pcm_open (&alsa_dev, hw_from_default, SND_PCM_STREAM_PLAYBACK, 0);

The same call works with hw_from_default == 'default', but fails when it is 'plughw:0,0'.
The error is
cannot open audio device "plughw:0,0" (Device or resource busy)

Maybe the devce is really in use?
Try "fuser /dev/snd/*"

Quoted 7 lines

I am using the latest snapshot of alsa-lib, alsa-lib20070821. I tried debugging but I cannot trace through the macros. As near as I can tell there have been no changes to alsa.conf, and this worked just fine before the latest upgrade alsa package alsa-lib.1.0.14-3

Is this a deliberate change in alsa that is known about, and is there a way to still get the functionality?

The old library binary might still remain. Some distros install libasound in /lib (or /lib64), instead of /usr/lib (or /usr/lib64).

Takashi

author
#3 lore raw
Quoted 8 lines · Takashi Iwai

At Thu, 23 Aug 2007 11:44:56 -0700,

Quoted 5 lines · stan

Hi,

I am unable to use plughw:0,0 as a device string while calling err = snd_pcm_open (&alsa_dev, hw_from_default, SND_PCM_STREAM_PLAYBACK, 0);

Quoted 10 lines
Quoted 5 lines

The same call works with hw_from_default == 'default', but fails when it is 'plughw:0,0'.
The error is
cannot open audio device "plughw:0,0" (Device or resource busy)

Maybe the devce is really in use?
Try "fuser /dev/snd/*"

I don't think so. Here is the output of fuser /dev/snd/*
/dev/snd/pcmC0D0p: 3069m
/dev/snd/timer: 3069

And I open default just before this in order to get its info so I can build the plughw.
Default device number (0)
Default subdevice number (0)
Default stream number (0)
Default card number (-1)
Default id (dmix:0,FORMAT=S32_LE)
Default name (dmix:0,FORMAT=S32_LE)
Default subname (dmix:0,FORMAT=S32_LE)
Default dev_class (0)
Default dev_subclass (0)
Default subdevices_count (1)
Default subdevices_avail (0)
Plughw plughw:0,0 numchars 10
cannot open audio device "plughw:0,0" (Device or resource busy)

Quoted 5 lines
Quoted 5 lines

I am using the latest snapshot of alsa-lib, alsa-lib20070821. I tried debugging but I cannot trace through the macros. As near as I can tell there have been no changes to alsa.conf, and this worked just fine before the latest upgrade alsa package alsa-lib.1.0.14-3

Quoted 8 lines
Quoted 3 lines

Is this a deliberate change in alsa that is known about, and is there a way to still get the functionality?

The old library binary might still remain. Some distros install libasound in /lib (or /lib64), instead of /usr/lib (or /usr/lib64).

I'm changing the links to point to the new library, and adding an alsa file in /etc/ld.so.conf.d/ so that the cache points to my library. When I run ldd on the binary it points to the library I've compiled.
ldd discord

        linux-gate.so.1 =>  (0x00110000)
        libm.so.6 => /lib/libm.so.6 (0x00939000)
        libpthread.so.0 => /lib/libpthread.so.0 (0x0096b000)
*        libasound.so.2 => /usr/local/lib/alsa/libasound.so.2 (0x00111000)*
        libncurses.so.5 => /lib/libncurses.so.5 (0x06707000)
        libsndfile.so.1 => /usr/lib/libsndfile.so.1 (0x001f7000)
        libsamplerate.so.0 => /usr/lib/libsamplerate.so.0 (0x00257000)
        libc.so.6 => /lib/libc.so.6 (0x007e2000)
        /lib/ld-linux.so.2 (0x007c3000)
        libdl.so.2 => /lib/libdl.so.2 (0x00964000)
        libtinfo.so.5 => /lib/libtinfo.so.5 (0x066ed000)
Quoted 3 lines

Takashi

I can see it call snd_config_search_alias_hooks () in conf.c, but lose the debug in the macros, and it comes back from the macros with the negative error code.

Thanks for your help.

#4 lore raw
Quoted 3 lines · stan

I don't think so. Here is the output of fuser /dev/snd/*
/dev/snd/pcmC0D0p: 3069m
/dev/snd/timer: 3069

Looks like it's in use by process 3069? What is that?

Lee

author
#5 lore raw
Quoted 7 lines · Lee Revell
Quoted 4 lines · stan

I don't think so. Here is the output of fuser /dev/snd/*
/dev/snd/pcmC0D0p: 3069m
/dev/snd/timer: 3069

Quoted 9 lines

Looks like it's in use by process 3069? What is that?

Lee
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

That is esd, Esound daemon.

NAME
esd - The Enlightened Sound Daemon

DESCRIPTION
Starts up EsounD, which provides a sound mixing server.

USAGE
esd [options]

-d DEVICE force esd to use sound device DEVICE
-b run server in 8 bit sound mode
-r RATE run server at sample rate of RATE
-as SECS free audio device after SECS of inactivity (-1 to
disable)

         -unix         use unix domain sockets instead of tcp/ip
         -tcp          use tcp/ip sockets instead of unix domain
         -public       make tcp/ip access public (other than localhost)
         -promiscuous  start unlocked and owned (disable authenticaton) 
NOT RECOMMENDED
         -terminate    terminate esd daemon after last client exits
         -noterminate  do not terminate esd daemon after last client exits
         -nobeeps      disable startup beeps
         -beeps        enable startup beeps
         -trust        start esd even if use of /tmp/.esd can be insecure
         -port PORT    listen for connections at PORT (only for tcp/ip)

-bind ADDRESS binds to ADDRESS (only for tcp/ip)

-v --version print version information

Possible devices are: /dev/dsp, /dev/dsp2, etc.

FILES /etc/esd.conf daemon configuration file

And it must be my problem. It must have been started by default because I didn't start it. I'll see if I can configure it to share the sound card or disable it.

Thank you very much.

#6 lore raw
Quoted 3 lines · stan

And it must be my problem. It must have been started by default because I didn't start it. I'll see if I can configure it to share the sound card or disable it.

I would disable it, as you have seen, sound server is not necessary to share the soundcard anymore - alsa-lib/dmix handles it.

Lee

author
#7 lore raw
Quoted 7 lines · Lee Revell
Quoted 4 lines · stan

And it must be my problem. It must have been started by default because I didn't start it. I'll see if I can configure it to share the sound card or disable it.

Quoted 10 lines

I would disable it, as you have seen, sound server is not necessary to share the soundcard anymore - alsa-lib/dmix handles it.

Lee
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

That makes sense, I'll get rid of it.