Regressions w.r.t. suspend behaviour in recent kernel versions
Hi,
I've been experiencing several problems with s2ram/s2disk with recent kernels (mostly starting with 2.6.19):
1. s2disk won't work without the nolapic kernel option.
I didn't have to use that option with kernels < 2.6.19. I only found out that I need this option with the kind help from Rafael Wysocki. Unfortunately, using the nolapic option raises new problems as I'm getting these warnings at boot time (with kernel 2.6.23-rc2):
++++++++++++++++++++++++++++++++++++
Aug 9 00:22:13 jawaka kernel: EXT3-fs: mounted filesystem with ordered data mode. Aug 9 00:22:13 jawaka kernel: WARNING: at kernel/irq/resend.c:70 check_irq_resend() Aug 9 00:22:13 jawaka kernel: [<c014afab>] check_irq_resend+0xab/0xc0 Aug 9 00:22:13 jawaka kernel: [<c014ab99>] enable_irq+0xc9/0xd0 Aug 9 00:22:13 jawaka kernel: [<c026ab54>] ide_config_drive_speed+0x164/0x380 Aug 9 00:22:13 jawaka kernel: [<c0266162>] piix_tune_chipset+0x1f2/0x3d0 Aug 9 00:22:13 jawaka kernel: [<c0270bfb>] ide_tune_dma+0x3b/0x50 Aug 9 00:22:13 jawaka kernel: [<c0265eec>] piix_config_drive_xfer_rate+0xc/0x40 Aug 9 00:22:13 jawaka kernel: [<c026fbfe>] ide_set_dma+0xe/0x40 Aug 9 00:22:13 jawaka kernel: [<c0266c2d>] set_using_dma+0x8d/0xe0 Aug 9 00:22:13 jawaka kernel: [<c0266ba0>] set_using_dma+0x0/0xe0 Aug 9 00:22:13 jawaka kernel: [<c026797c>] generic_ide_ioctl+0xdc/0x430 Aug 9 00:22:13 jawaka kernel: [<c0273722>] idedisk_ioctl+0xf2/0x120 Aug 9 00:22:13 jawaka kernel: [<c01eb900>] blk_end_sync_rq+0x0/0x30 Aug 9 00:22:13 jawaka kernel: [<c0273672>] idedisk_ioctl+0x42/0x120 Aug 9 00:22:13 jawaka kernel: [<c0273630>] idedisk_ioctl+0x0/0x120 Aug 9 00:22:13 jawaka kernel: [<c01ee194>] blkdev_driver_ioctl+0x54/0x60 Aug 9 00:22:13 jawaka kernel: [<c01ee538>] blkdev_ioctl+0x358/0x7b0 Aug 9 00:22:13 jawaka kernel: [<c02faefb>] _read_unlock_irq+0x1b/0x20 Aug 9 00:22:13 jawaka kernel: [<c0157e7f>] __do_fault+0x15f/0x340 Aug 9 00:22:13 jawaka kernel: [<c0157e23>] __do_fault+0x103/0x340 Aug 9 00:22:13 jawaka kernel: [<c0157e88>] __do_fault+0x168/0x340 Aug 9 00:22:13 jawaka kernel: [<c01160bb>] do_page_fault+0x18b/0x6b0 Aug 9 00:22:13 jawaka kernel: [<c0115ff7>] do_page_fault+0xc7/0x6b0 Aug 9 00:22:13 jawaka kernel: [<c0134384>] up_read+0x14/0x30 Aug 9 00:22:13 jawaka kernel: [<c0190388>] block_ioctl+0x18/0x20 Aug 9 00:22:13 jawaka kernel: [<c0190370>] block_ioctl+0x0/0x20 Aug 9 00:22:13 jawaka kernel: [<c0176e8f>] do_ioctl+0x1f/0x70 Aug 9 00:22:13 jawaka kernel: [<c0176f3c>] vfs_ioctl+0x5c/0x260 Aug 9 00:22:13 jawaka kernel: [<c01771b2>] sys_ioctl+0x72/0x90 Aug 9 00:22:13 jawaka kernel: [<c01040de>] syscall_call+0x7/0xb Aug 9 00:22:13 jawaka kernel: ======================= Aug 9 00:22:13 jawaka kernel: Linux agpgart interface v0.102
+++++++++++++++++++++++++++++++++
Without the nolapic option the kernel will panic when trying to suspend to disk. Here are the last lines of the kernel output:
EIP: [<c01127fd> lapic_nmi_suspend+0x1d/0x30 ss:ESP 0068:c1ae3ec8
Kernel panic - not syncing: Attempted to kill init!
Rafael advised me to post directly to the LKML on this issue and so I do.
You can follow the whole discussion with Rafael here:
http://sourceforge.net/mailarchive/forum.php?thread_name=46A9A9A8.2070209%40onlinehome.de&forum_name=suspend-devel
http://sourceforge.net/mailarchive/forum.php?thread_name=200708062038.41452.rjw%40sisk.pl&forum_name=suspend-devel
2. s2ram won't work with kernels > 2.6.18 if the fglrx module is loaded.
Please, don't stone me for using the fglrx driver, without it I couldn't
suspend at all. Unfortunately, I'm stuck to kernel 2.6.18 at the
moment since it's the last kernel that would suspend to ram with the fglrx module loaded. With more recent kernels the system will hang with "Suspending console(s)".
3. Even with the 2.6.18 kernel sound won't work after suspending to ram. I don't know when this started, but I know that this has not been an issue in the past.
Please, let me know what additional information you might need.
Kind regards,
Felix
Quoted 1 line · On Fri, 24 Aug 2007 14:42:55 +0200 Felix Homann <[email protected]> wrote:
Nearly two weeks, zero replies.
Quoted 41 lines
Hi,
I've been experiencing several problems with s2ram/s2disk with recent kernels (mostly starting with 2.6.19):
1. s2disk won't work without the nolapic kernel option.
I didn't have to use that option with kernels < 2.6.19. I only found out that I need this option with the kind help from Rafael Wysocki. Unfortunately, using the nolapic option raises new problems as I'm getting these warnings at boot time (with kernel 2.6.23-rc2):
++++++++++++++++++++++++++++++++++++
Aug 9 00:22:13 jawaka kernel: EXT3-fs: mounted filesystem with ordered data mode. Aug 9 00:22:13 jawaka kernel: WARNING: at kernel/irq/resend.c:70 check_irq_resend() Aug 9 00:22:13 jawaka kernel: [<c014afab>] check_irq_resend+0xab/0xc0 Aug 9 00:22:13 jawaka kernel: [<c014ab99>] enable_irq+0xc9/0xd0 Aug 9 00:22:13 jawaka kernel: [<c026ab54>] ide_config_drive_speed+0x164/0x380 Aug 9 00:22:13 jawaka kernel: [<c0266162>] piix_tune_chipset+0x1f2/0x3d0 Aug 9 00:22:13 jawaka kernel: [<c0270bfb>] ide_tune_dma+0x3b/0x50 Aug 9 00:22:13 jawaka kernel: [<c0265eec>] piix_config_drive_xfer_rate+0xc/0x40 Aug 9 00:22:13 jawaka kernel: [<c026fbfe>] ide_set_dma+0xe/0x40 Aug 9 00:22:13 jawaka kernel: [<c0266c2d>] set_using_dma+0x8d/0xe0 Aug 9 00:22:13 jawaka kernel: [<c0266ba0>] set_using_dma+0x0/0xe0 Aug 9 00:22:13 jawaka kernel: [<c026797c>] generic_ide_ioctl+0xdc/0x430 Aug 9 00:22:13 jawaka kernel: [<c0273722>] idedisk_ioctl+0xf2/0x120 Aug 9 00:22:13 jawaka kernel: [<c01eb900>] blk_end_sync_rq+0x0/0x30 Aug 9 00:22:13 jawaka kernel: [<c0273672>] idedisk_ioctl+0x42/0x120 Aug 9 00:22:13 jawaka kernel: [<c0273630>] idedisk_ioctl+0x0/0x120 Aug 9 00:22:13 jawaka kernel: [<c01ee194>] blkdev_driver_ioctl+0x54/0x60 Aug 9 00:22:13 jawaka kernel: [<c01ee538>] blkdev_ioctl+0x358/0x7b0 Aug 9 00:22:13 jawaka kernel: [<c02faefb>] _read_unlock_irq+0x1b/0x20 Aug 9 00:22:13 jawaka kernel: [<c0157e7f>] __do_fault+0x15f/0x340 Aug 9 00:22:13 jawaka kernel: [<c0157e23>] __do_fault+0x103/0x340 Aug 9 00:22:13 jawaka kernel: [<c0157e88>] __do_fault+0x168/0x340 Aug 9 00:22:13 jawaka kernel: [<c01160bb>] do_page_fault+0x18b/0x6b0
Quoted 8 lines
Aug 9 00:22:13 jawaka kernel: [<c0115ff7>] do_page_fault+0xc7/0x6b0 Aug 9 00:22:13 jawaka kernel: [<c0134384>] up_read+0x14/0x30 Aug 9 00:22:13 jawaka kernel: [<c0190388>] block_ioctl+0x18/0x20 Aug 9 00:22:13 jawaka kernel: [<c0190370>] block_ioctl+0x0/0x20 Aug 9 00:22:13 jawaka kernel: [<c0176e8f>] do_ioctl+0x1f/0x70 Aug 9 00:22:13 jawaka kernel: [<c0176f3c>] vfs_ioctl+0x5c/0x260 Aug 9 00:22:13 jawaka kernel: [<c01771b2>] sys_ioctl+0x72/0x90 Aug 9 00:22:13 jawaka kernel: [<c01040de>] syscall_call+0x7/0xb
I expect that got fixed in later kernels.
Beware that 2.6.24-rc5 is uselessly buggy, so ftp://ftp.kernel.org/pub/linux/kernel/v2.6/snapshots/patch-2.6.23-rc5-git1.gz would be a better kernel to test to check that we fixed this warning.
Quoted 7 lines
Aug 9 00:22:13 jawaka kernel: ======================= Aug 9 00:22:13 jawaka kernel: Linux agpgart interface v0.102+++++++++++++++++++++++++++++++++
Without the nolapic option the kernel will panic when trying to suspend to disk.
A *large* number of people need noapic or nolapic to get Linux to work.
Quoted 4 lines
Here are the last lines of the kernel output:
EIP: [<
c01127fd>lapic_nmi_suspend+0x1d/0x30ss:ESP 0068:c1ae3ec8Kernel panic - not syncing: Attempted to kill init!
Are you able to provide us with more information about this bug? A digital photograph of the screen would suit, or perhaps you can generate a full trace with netconsole (Documentation/networking/netconsole.txt), although suspend+netconsole tends to be a bad (and recently worsening) combination.
Quoted 1 line
Rafael advised me to post directly to the LKML on this issue and so I do.
Thanks. Please continue to do so.
Quoted 5 lines
You can follow the whole discussion with Rafael here:
http://sourceforge.net/mailarchive/forum.php?thread_name=46A9A9A8.2070209%40onlinehome.de&forum_name=suspend-devel
http://sourceforge.net/mailarchive/forum.php?thread_name=200708062038.41452.rjw%40sisk.pl&forum_name=suspend-devel
Quoted 7 lines
2. s2ram won't work with kernels > 2.6.18 if the fglrx module is loaded.
Please, don't stone me for using the fglrx driver, without it I couldn't
suspend at all. Unfortunately, I'm stuck to kernel 2.6.18 at the
moment since it's the last kernel that would suspend to ram with the fglrx module loaded. With more recent kernels the system will hang with "Suspending console(s)".
My Vaio reliably hangs at the same place with 2.6.23-rc4. I'll bisect that next week sometime. Hopefully the result of that effort will fix your bug.
Please test Linus's tree regularly and don't let us release 2.6.23 until
it is fixed.
Quoted 3 lines
3. Even with the 2.6.18 kernel sound won't work after suspending to ram. I don't know when this started, but I know that this has not been an issue in the past.
Please provide full details in a separate bug report. Send that report to myself, [email protected], Jaroslav Kysela <[email protected]> and Takashi Iwai <[email protected]>
Thanks.
Quoted 3 lines · Andrew Morton
Quoted 1 line · On Fri, 24 Aug 2007 14:42:55 +0200 Felix Homann <[email protected]> wrote:
Nearly two weeks, zero replies.
Thanks for caring :-)
Quoted 7 lines
Quoted 5 lines
Aug 9 00:22:13 jawaka kernel: EXT3-fs: mounted filesystem with ordered data mode. Aug 9 00:22:13 jawaka kernel: WARNING: at kernel/irq/resend.c:70
check_irq_resend()I expect that got fixed in later kernels.
Yes, I've just tried 2.6.23-rc5-git1 and the warning has gone!
Quoted 3 lines
Quoted 1 line
Without the nolapic option the kernel will panic when trying to suspend to disk.
A *large* number of people need noapic or nolapic to get Linux to work.
Even better, on 2.6.23-rc5-git1 I don't need nolapic anymore!
Quoted 6 lines
Quoted 4 lines
Here are the last lines of the kernel output:
EIP: [<
c01127fd>lapic_nmi_suspend+0x1d/0x30ss:ESP 0068:c1ae3ec8Kernel panic - not syncing: Attempted to kill init!Are you able to provide us with more information about this bug?
If you're still interested in more more information now that the bug has apparently been solved "en passant" I can take a photograph tomorrow. Please, let me know.
Quoted 6 lines
Quoted 1 line
With more recent kernels the system will hang with "Suspending console(s)".
My Vaio reliably hangs at the same place with 2.6.23-rc4. I'll bisect that next week sometime. Hopefully the result of that effort will fix your bug.
Please test Linus's tree regularly and don't let us release 2.6.23 until
it is fixed.
Great!
Quoted 5 lines
Quoted 1 line
3. Even with the 2.6.18 kernel sound won't work after suspending to ram. I don't know when this started, but I know that this has not been an issue in the past.
Please provide full details in a separate bug report. Send that report to myself, [email protected], Jaroslav Kysela <[email protected]> and Takashi Iwai <[email protected]>
I'll do that in the next couple of days.
Thanks again,
Felix
Quoted 19 lines · On Thu, 06 Sep 2007 00:51:50 +0200 Felix Homann <[email protected]> wrote:
Quoted 3 lines · Andrew Morton
Quoted 1 line · On Fri, 24 Aug 2007 14:42:55 +0200 Felix Homann <[email protected]> wrote:
Nearly two weeks, zero replies.
Thanks for caring :-)
Quoted 7 lines
Quoted 5 lines
Aug 9 00:22:13 jawaka kernel: EXT3-fs: mounted filesystem with ordered data mode. Aug 9 00:22:13 jawaka kernel: WARNING: at kernel/irq/resend.c:70
check_irq_resend()I expect that got fixed in later kernels.
Yes, I've just tried 2.6.23-rc5-git1 and the warning has gone!
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Without the nolapic option the kernel will panic when trying to suspend to disk.
A *large* number of people need noapic or nolapic to get Linux to work.
Even better, on 2.6.23-rc5-git1 I don't need nolapic anymore!
damn, we break so much stuff that now we're breaking our old bugs too!
Quoted 11 lines
Quoted 7 lines
Quoted 5 lines
Here are the last lines of the kernel output:
EIP: [<
c01127fd>lapic_nmi_suspend+0x1d/0x30ss:ESP 0068:c1ae3ec8Kernel panic - not syncing: Attempted to kill init!Are you able to provide us with more information about this bug?
If you're still interested in more more information now that the bug has apparently been solved "en passant" I can take a photograph tomorrow. Please, let me know.
No thanks, let's just move on..
Quoted 15 lines
Quoted 7 lines
Quoted 2 lines
With more recent kernels the system will hang with "Suspending console(s)".
My Vaio reliably hangs at the same place with 2.6.23-rc4. I'll bisect that next week sometime. Hopefully the result of that effort will fix your bug.
Please test Linus's tree regularly and don't let us release 2.6.23 until
it is fixed.Great!
Quoted 4 lines
Quoted 3 lines
3. Even with the 2.6.18 kernel sound won't work after suspending to ram. I don't know when this started, but I know that this has not been an issue in the past.
Quoted 6 lines
Quoted 3 lines
Please provide full details in a separate bug report. Send that report to myself, [email protected], Jaroslav Kysela <[email protected]> and Takashi Iwai <[email protected]>
I'll do that in the next couple of days.
Thanks.