Skip to contentSkip to conversation

read-only /sys/block/sda/device/queue_depth

DISCUSSION Yan Seiner 1 participant 1 message Sep 1, 2007

lore
Share & tools
lore

Yan Seiner

author
#0 lore raw

I'm running into the same issue reported here:

<http://readlist.com/lists/vger.kernel.org/linux-kernel/72/361184.html>

I am using the ata_piix module. If I read the docs correctly, I should be able to use ahci as well; I need to rebuild the kernel though (debian insists on putting ata_piix into the initrd....)

dionysus:~# ls -l /sys/block/sd[abcde]/device/queue_depth
-r--r--r-- 1 root root 4096 2007-09-01 06:00 /sys/block/sda/device/queue_depth
-r--r--r-- 1 root root 4096 2007-09-01 06:00 /sys/block/sdb/device/queue_depth
-r--r--r-- 1 root root 4096 2007-09-01 06:00 /sys/block/sdc/device/queue_depth
-r--r--r-- 1 root root 4096 2007-09-01 06:00 /sys/block/sdd/device/queue_depth
-r--r--r-- 1 root root 4096 2007-09-01 06:00 /sys/block/sde/device/queue_depth

If I change the perms to rw, I get an Input/Output error. AFAICT, the drives support queueing, but it's disabled.

dionysus:~# uname -a
Linux dionysus 2.6.22.6 #1 SMP Fri Aug 31 14:24:17 PDT 2007 x86_64 GNU/Linux

libata version 2.21 loaded.
ata_piix 0000:00:1f.2: version 2.11
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14
ata2: SATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15 ata1.00: Host Protected Area detected:
ata1.00: ATA-7: ST3400620AS, 3.AAC, max UDMA/133
ata1.00: 781420655 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: Host Protected Area detected:
ata1.01: ATA-7: ST3400620AS, 3.AAC, max UDMA/133
ata1.01: 781420655 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: Host Protected Area detected:
ata1.00: configured for UDMA/133
ata1.01: Host Protected Area detected:
ata1.01: configured for UDMA/133
ata2.00: ATA-7: ST3400620AS, 3.AAC, max UDMA/133
ata2.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: ATA-7: ST3400620AS, 3.AAC, max UDMA/133
ata2.01: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
ata2.01: configured for UDMA/133

dionysus:~# lspci -s 00:1f.2 -vvv
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) (prog-if 8a [Master SecP PriP])
       Subsystem: Giga-byte Technology Unknown device b002
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Interrupt: pin B routed to IRQ 19
       Region 0: I/O ports at 01f0 [size=8]
       Region 1: I/O ports at 03f4 [size=1]
       Region 2: I/O ports at 0170 [size=8]
       Region 3: I/O ports at 0374 [size=1]
       Region 4: I/O ports at f000 [size=16]
       Capabilities: [70] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Signature · 8 lines
 o__
 ,>/'_          o__
 (_)\(_)        ,>/'_          o__
Yan Seiner      (_)\(_)         ,>/'_   o__     o__
Certified Personal Trainer     (_)\(_)  ,>/'_   ,>/'_
Licensed Professional Engineer         (_)\(_) (_)\(_)

Linux stuff has made big progress over the competition. When things sit and don't start right away, we have a watch, and those poor guys have to settle for an hourglass.