2.6.23 alpha unistd.h changes
Hi!
At Alphacore we used to patch the kernel headers for a while now; We added syscalls __NR_openat (447) until __NR_tee (466).
However, since 2.6.23 these syscall where added upstream, but with different syscall numbers; What happens is the following:
* glibc 2.6.90 compiled with 2.6.23 headers installed
* kernel 2.6.21 (our patched headers in place, different syscall 'ordering'/numbers) installed
[root@tyskie ~]# uname -r; touch x; rm -f x
2.6.23-0.145.rc4.fc8
rm: cannot remove `x': File exists
:-( I don't want to live without rm :-P and chmod doesn't work as well...
If I start 2.6.15, where these syscalls where not in place, it works just fine. If I install old glibc 2.6 (compiled against 2.6.21 headers) and kernel 2.6.21 also everything is fine.
Final test was now:
* Boot kernel 2.6.23 and glibc 2.6.90 (compiled against 2.6.23 headers), also everything seems to work.
As these additions are quite new to upstream kernel, but at Alphacore we have patched it since a while now (I don't know about other Alpha ports; Debian folks may speak up now!), I would suggest to use the same 'ordering' of the syscalls upstream and add the new syscalls that we had not in place, but are now upstream to the end of our 'old' list.
I have attached our patch that we used for 2.6.21.
Please let me know if that's fine everyone and keep me posted directly and only via m/l, as I might miss the mail then...
Best,
Oliver
include/asm-alpha/unistd.h renamed from include/asm-alpha/unistd.h.missing_defines +22 -1
@@ -388,9 +388,30 @@#define __NR_inotify_add_watch 445#define __NR_inotify_rm_watch 446 +#define __NR_openat 447 +#define __NR_mkdirat 448 +#define __NR_mknodat 449 +#define __NR_fchownat 450 +#define __NR_futimesat 451 +#define __NR_unlinkat 452 +#define __NR_renameat 453 +#define __NR_linkat 454 +#define __NR_symlinkat 455 +#define __NR_readlinkat 456 +#define __NR_fchmodat 457 +#define __NR_faccessat 458 +#define __NR_pselect6 459 +#define __NR_ppoll 460 +#define __NR_unshare 461 +#define __NR_set_robust_list 462 +#define __NR_get_robust_list 463 +#define __NR_splice 464 +#define __NR_sync_file_range 465 +#define __NR_tee 466 +#ifdef __KERNEL__ -#define NR_SYSCALLS 447 +#define NR_SYSCALLS 467#define __ARCH_WANT_IPC_PARSE_VERSION#define __ARCH_WANT_OLD_READDIR
arch/alpha/kernel/systbls.S renamed from arch/alpha/kernel/systbls.S.missing_defines +20 -0
@@ -465,6 +465,26 @@ .quad sys_inotify_init .quad sys_inotify_add_watch /* 445 */ .quad sys_inotify_rm_watch + .quad sys_openat + .quad sys_mkdirat + .quad sys_mknodat + .quad sys_fchownat /* 450 */ + .quad sys_futimesat + .quad sys_unlinkat + .quad sys_renameat + .quad sys_linkat + .quad sys_symlinkat /* 455 */ + .quad sys_readlinkat + .quad sys_fchmodat + .quad sys_faccessat + .quad sys_pselect6 + .quad sys_ppoll /* 460 */ + .quad sys_unshare + .quad sys_set_robust_list + .quad sys_get_robust_list + .quad sys_splice + .quad sys_sync_file_range + .quad sys_tee .size sys_call_table, . - sys_call_table .type sys_call_table, @object
Quoted 32 lines · Oliver Falk
Hi!
At Alphacore we used to patch the kernel headers for a while now; We added syscalls
__NR_openat(447) until__NR_tee(466).However, since 2.6.23 these syscall where added upstream, but with different syscall numbers; What happens is the following:
* glibc 2.6.90 compiled with 2.6.23 headers installed
* kernel 2.6.21 (our patched headers in place, different syscall 'ordering'/numbers) installed[root@tyskie ~]# uname -r; touch x; rm -f x
2.6.23-0.145.rc4.fc8
rm: cannot remove `x': File exists:-( I don't want to live without rm :-P and chmod doesn't work as well...
If I start 2.6.15, where these syscalls where not in place, it works just fine. If I install old glibc 2.6 (compiled against 2.6.21 headers) and kernel 2.6.21 also everything is fine.
Final test was now:
* Boot kernel 2.6.23 and glibc 2.6.90 (compiled against 2.6.23 headers), also everything seems to work.As these additions are quite new to upstream kernel, but at Alphacore we have patched it since a while now (I don't know about other Alpha ports; Debian folks may speak up now!), I would suggest to use the same 'ordering' of the syscalls upstream and add the new syscalls that we had not in place, but are now upstream to the end of our 'old' list.
Quoted 5 lines
I have attached our patch that we used for 2.6.21.
Please let me know if that's fine everyone and keep me posted directly and only via m/l, as I might miss the mail then...
Attached patch should bring ordering back to what we had at AC. systbls.S should be ordered as well, but from functional perspective, I don't worry about that for now :-P
-of
unistd.h renamed from unistd.h.old_syscall_ordering +24 -24
@@ -401,30 +401,30 @@#define __NR_inotify_init 444#define __NR_inotify_add_watch 445#define __NR_inotify_rm_watch 446 -#define __NR_fdatasync 447 -#define __NR_kexec_load 448 -#define __NR_migrate_pages 449 -#define __NR_openat 450 -#define __NR_mkdirat 451 -#define __NR_mknodat 452 -#define __NR_fchownat 453 -#define __NR_futimesat 454 -#define __NR_fstatat64 455 -#define __NR_unlinkat 456 -#define __NR_renameat 457 -#define __NR_linkat 458 -#define __NR_symlinkat 459 -#define __NR_readlinkat 460 -#define __NR_fchmodat 461 -#define __NR_faccessat 462 -#define __NR_pselect6 463 -#define __NR_ppoll 464 -#define __NR_unshare 465 -#define __NR_set_robust_list 466 -#define __NR_get_robust_list 467 -#define __NR_splice 468 -#define __NR_sync_file_range 469 -#define __NR_tee 470 +#define __NR_openat 447 +#define __NR_mkdirat 448 +#define __NR_mknodat 449 +#define __NR_fchownat 450 +#define __NR_futimesat 451 +#define __NR_unlinkat 452 +#define __NR_renameat 453 +#define __NR_linkat 454 +#define __NR_symlinkat 455 +#define __NR_readlinkat 456 +#define __NR_fchmodat 457 +#define __NR_faccessat 458 +#define __NR_pselect6 459 +#define __NR_ppoll 460 +#define __NR_unshare 461 +#define __NR_set_robust_list 462 +#define __NR_get_robust_list 463 +#define __NR_splice 464 +#define __NR_sync_file_range 465 +#define __NR_tee 466 +#define __NR_fdatasync 467 +#define __NR_kexec_load 468 +#define __NR_migrate_pages 469 +#define __NR_fstatat64 470#define __NR_vmsplice 471#define __NR_move_pages 472#define __NR_getcpu 473
Quoted 7 lines · Oliver Falk
As these additions are quite new to upstream kernel, but at Alphacore we have patched it since a while now (I don't know about other Alpha ports; Debian folks may speak up now!), I would suggest to use the same 'ordering' of the syscalls upstream and add the new syscalls that we had not in place, but are now upstream to the end of our 'old' list.
If you want to avoid that in the future, you may want to push your changes upstream.
-hpa
Quoted 1 line · Oliver Falk
Hi!
Hi Oliver!
Quoted 2 lines
At Alphacore we used to patch the kernel headers for a while now; We added syscalls
__NR_openat(447) until__NR_tee(466).
Why did your numbers differ from the numbers that were used in the upstream kernel?
The Alpha maintainers (Cc's added) might now better what happened here.
Quoted 3 lines
However, since 2.6.23 these syscall where added upstream, but with different syscall numbers; What happens is the following:
...
These syscalls were added in 2.6.22, not 2.6.23, and are therefore in the officially released kernel since more than two months.
Changing a userspace ABI that has already been part of an officially released kernel because someone patched other syscall numbers into his private kernel doesn't sound like a good solution.
Quoted 2 lines
Best,
Oliver
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedQuoted 1 line · Oliver Falk
Hi!
Hi Oliver!
Quoted 7 lines
...
As these additions are quite new to upstream kernel, but at Alphacore we have patched it since a while now (I don't know about other Alpha ports; Debian folks may speak up now!), I would suggest to use the same 'ordering' of the syscalls upstream and add the new syscalls that we had not in place, but are now upstream to the end of our 'old' list.
...
I just checked:
It seems Debian didn't patch them into the kernel at all, and since two months Debian unstable ships kernel 2.6.22 with the upstream syscall numbers.
Quoted 2 lines
Best,
Oliver
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedQuoted 10 lines · Oliver Falk
At Alphacore we used to patch the kernel headers for a while now; We added syscalls
__NR_openat(447) until__NR_tee(466).However, since 2.6.23 these syscall where added upstream, but with different syscall numbers; What happens is the following:
* glibc 2.6.90 compiled with 2.6.23 headers installed
* kernel 2.6.21 (our patched headers in place, different syscall 'ordering'/numbers) installed
Quoted 5 lines
[root@tyskie ~]# uname -r; touch x; rm -f x
2.6.23-0.145.rc4.fc8
rm: cannot remove `x': File exists:-( I don't want to live without rm :-P and chmod doesn't work as well...
It's all your own fault. Only mainline can assign syscall numbers. See it as a learning experience. Next time when you assign them you shouldn't use them before the patch has reached mainline.
-Andi
Quoted 13 lines · Adrian Bunk
Quoted 1 line · Oliver Falk
Hi!
Hi Oliver!
Quoted 7 lines
...
As these additions are quite new to upstream kernel, but at Alphacore we have patched it since a while now (I don't know about other Alpha ports; Debian folks may speak up now!), I would suggest to use the same 'ordering' of the syscalls upstream and add the new syscalls that we had not in place, but are now upstream to the end of our 'old' list.
...
Quoted 5 lines
I just checked:
It seems Debian didn't patch them into the kernel at all, and since two months Debian unstable ships kernel 2.6.22 with the upstream syscall numbers.
That's possible a problem. Right. Someone with contacts to Debian here? If Debian hasn't rebuilt glibc against the new headers, we could change it without problems.
If not, we have a problem on AC... Anyone with a glibc that was compiled against our patched unistd.h (so including the new syscall numbers), will not be able to upgrade the kernel, but also needs to upgrade glibc and then *must* reboot :-(
Best,
Oliver
Quoted 10 lines · H. Peter Anvin
Quoted 6 lines · Oliver Falk
As these additions are quite new to upstream kernel, but at Alphacore we have patched it since a while now (I don't know about other Alpha ports; Debian folks may speak up now!), I would suggest to use the same 'ordering' of the syscalls upstream and add the new syscalls that we had not in place, but are now upstream to the end of our 'old' list.
If you want to avoid that in the future, you may want to push your changes upstream.
Sure, sure! I wasn't the one who actually did patch that, I just took what was there...
I'll will submit any relevant patches to upstream from now on!
Best,
Oliver
Quoted 6 lines · Adrian Bunk
Quoted 2 lines · Oliver Falk
At Alphacore we used to patch the kernel headers for a while now; We added syscalls
__NR_openat(447) until__NR_tee(466).Why did your numbers differ from the numbers that were used in the upstream kernel?
Afaik, our patch was done a while ago and nobody every submitted it upstream - don't know why...
At AC, we follow RH/Fedora packages and there we had glibc-kernheaders - where our patch originates. When the glibc/kernel packages changed and glibc-kernheaders died, I patched the syscalls into kernel headers; Not thinking that I better submit it upstream. :-(
Quoted 8 lines
The Alpha maintainers (Cc's added) might now better what happened here.
Quoted 3 lines
However, since 2.6.23 these syscall where added upstream, but with different syscall numbers; What happens is the following:
...These syscalls were added in 2.6.22, not 2.6.23, and are therefore in the officially released kernel since more than two months.
Yes, 2.6.22, I've just encountered the problem with 2.6.23...
Quoted 3 lines
Changing a userspace ABI that has already been part of an officially released kernel because someone patched other syscall numbers into his private kernel doesn't sound like a good solution.
As I wrote in my previous mail, that's true, but if Debian folks haven't recompiled glibc against the new headers we can change it without breaking something...
-of
Quoted 4 lines · Oliver Falk
Quoted 2 lines · Adrian Bunk
On Mon, Sep 17, 2007 at 10:33:07PM +0200, Oliver Falk wrote:
Quoted 9 lines
Quoted 5 lines
Quoted 3 lines
At Alphacore we used to patch the kernel headers for a while now; We added syscalls
__NR_openat(447) until__NR_tee(466).Why did your numbers differ from the numbers that were used in the upstream kernel?
Afaik, our patch was done a while ago and nobody every submitted it upstream - don't know why...
Yes, it was done by me and I had no info how to push the updates to upstream, sorry. (by that time, there were no latest "distribution" available with those changes).
Quoted 5 lines
At AC, we follow RH/Fedora packages and there we had glibc-kernheaders - where our patch originates. When the glibc/kernel packages changed and glibc-kernheaders died, I patched the syscalls into kernel headers; Not thinking that I better submit it upstream. :-(
Yea, now there is more interest and it is better to do it right. :)
Regards,
Signature · 7 lines
Sergey Tikhonov Head, R&D department Solvo Ltd. Saint-Petersburg, Russia http://www.solvo.ru [email protected]
Quoted 18 lines · Sergey Tikhonov
Quoted 7 lines · Oliver Falk
Quoted 5 lines · Adrian Bunk
Quoted 3 lines · Oliver Falk
At Alphacore we used to patch the kernel headers for a while now; We added syscalls
__NR_openat(447) until__NR_tee(466).Quoted 7 lines
Quoted 3 lines
Why did your numbers differ from the numbers that were used in the upstream kernel?
Afaik, our patch was done a while ago and nobody every submitted it upstream - don't know why...
Yes, it was done by me and I had no info how to push the updates to upstream, sorry. (by that time,
there were no latest "distribution" available with those changes).
Quoted 6 lines
Quoted 5 lines
At AC, we follow RH/Fedora packages and there we had glibc-kernheaders - where our patch originates. When the glibc/kernel packages changed and glibc-kernheaders died, I patched the syscalls into kernel headers; Not thinking that I better submit it upstream. :-(
Yea, now there is more interest and it is better to do it right. :)
To make it easy for everyone....
There should not be many AC users that run the latest versions of everything.
I will keep the sorting of the syscalls as they are - no change required upstream.
People who want new kernel or new glibc will then also need to update the other. DOT. POINT. END. :-)
Kernel 2.6.23 will also require new aboot.... So many things....
Since online upgrading from AC3 to FC8axp will not be supported anyway (because of various reasons and now 2 more of them), I can live with that decision finally.
Thx everyone...
Best,
Oliver
Quoted 16 lines · Oliver Falk
Quoted 15 lines · Adrian Bunk
Quoted 1 line · Oliver Falk
Hi!
Hi Oliver!
Quoted 7 lines
...
As these additions are quite new to upstream kernel, but at Alphacore we have patched it since a while now (I don't know about other Alpha ports; Debian folks may speak up now!), I would suggest to use the same 'ordering' of the syscalls upstream and add the new syscalls that we had not in place, but are now upstream to the end of our 'old' list.
...I just checked:
Quoted 8 lines
Quoted 3 lines
It seems Debian didn't patch them into the kernel at all, and since two months Debian unstable ships kernel 2.6.22 with the upstream syscall numbers.
That's possible a problem. Right. Someone with contacts to Debian here? If Debian hasn't rebuilt glibc against the new headers, we could change it without problems.
...
According to the Debian auto-builder database [1], the Alpha glibc package in Debian unstable has been rebuilt 8 times since the 2.6.22 kernel packages entered Debian unstable.
And it's not only Debian, at least Gentoo also offers an Alpha port.
Quoted 2 lines
Best,
Oliver
cu
Adrian
[1] http://buildd.debian.org/build.php?arch=alpha&pkg=glibc
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedQuoted 23 lines · Adrian Bunk
Quoted 14 lines · Oliver Falk
Quoted 13 lines · Adrian Bunk
Quoted 1 line · Oliver Falk
Hi!
Hi Oliver!
Quoted 7 lines
...
As these additions are quite new to upstream kernel, but at Alphacore we have patched it since a while now (I don't know about other Alpha ports; Debian folks may speak up now!), I would suggest to use the same 'ordering' of the syscalls upstream and add the new syscalls that we had not in place, but are now upstream to the end of our 'old' list.
...I just checked:
Quoted 7 lines
Quoted 3 lines
It seems Debian didn't patch them into the kernel at all, and since two months Debian unstable ships kernel 2.6.22 with the upstream syscall numbers.
That's possible a problem. Right. Someone with contacts to Debian here? If Debian hasn't rebuilt glibc against the new headers, we could change it without problems.
...
Quoted 5 lines
According to the Debian auto-builder database [1], the Alpha glibc package in Debian unstable has been rebuilt 8 times since the 2.6.22 kernel packages entered Debian unstable.
And it's not only Debian, at least Gentoo also offers an Alpha port.
Well. As I said. I'll step back and let it be as it is. Debian was to fast. :-)
-of