Skip to contentSkip to conversation

Serial ATA does not find partitions (Hitachi HD, new? ATI controller) where old SATA works

DISCUSSION Hernan G Solari 2 participants 2 messages Sep 22, 2007 – Sep 27, 2007

lore
Share & tools
lore
#0 lore raw

Hello
I am disturbing you with this problem because I think there is
something to be learnt, I have
no urgency or further-problem with my work-around.

Description: trying to boot with kernel 2.6.22 the booting process stops not finding
the root partition, in the previous line it gives an EMPTY list of available partitions.
Disabling completely the (Serial) ATA driver and enabling the old SATA driver is my work-around (a regresion).
Installing linux with debian 4.0 is possible (kernel 2.6.18.4-amd64), but ubuntu crashes
silently after loading kernel and initrd.image (I guess it is the same problem).

Description of the machine, dmesg output with kernel 2.6.22, lspci, modules, cpu, iomem, ioports, acpi-table as well as instalation story at
http://www.df.uba.ar/~solari/acer.html

Hitachi 120Gb drive
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5

ATI controller
00:12.0 IDE interface: ATI Technologies Inc 4379 Serial ATA Controller (rev 80)
(prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Acer Incorporated [ALI] Unknown device 010f (pci.ids are up-to-day)

The acpi system does not work either, but I have reported the problem to a more specific list.

I can test patches in case you want.

thanks for your attention

Hernan

Signature · 1 line
Hernán Gustavo Solari, [email protected], http://www.df.uba.ar/~solari
#1 lore raw
Quoted 5 lines · Hernan G Solari

Hello
I am disturbing you with this problem because I think there is
something to be learnt, I have
no urgency or further-problem with my work-around.

Quoted 10 lines

Description: trying to boot with kernel 2.6.22 the booting process stops not finding
the root partition, in the previous line it gives an EMPTY list of available partitions.
Disabling completely the (Serial) ATA driver and enabling the old SATA driver is my work-around (a regresion).
Installing linux with debian 4.0 is possible (kernel 2.6.18.4-amd64), but ubuntu crashes
silently after loading kernel and initrd.image (I guess it is the same problem).

Can you set up netconsole and collect the kernel log from the failing boot and post it here?

Thanks.

Signature · 1 line
tejun