More E820 brokenness
As luck would have it, it's not just an obscure Geode system which has a broken E820 implementation. Today I received a bug report about a Dell system (XPS M1330) with broken E820.
Unfortunately, the workaround for the Geode breaks this system, because x86-64 doesn't fall back to the e801/88 information like the i386 kernel does.
I wonder if the relevant people could test out this patch to see how it works on their respective system. This patch reverts to 2.6.23-rc8 behaviour of simply truncating the map, but still makes e801/88 info available to the kernel; this hopefully should match 2.6.22 behaviour.
I want to emphasize that this is seriously broken. Using a partial e820 map could have disastrous results, since the kernel will have partial memory map information and not know about reserved areas, etc. Part of me feels that the right thing to do is what the current git kernel does -- either fall back to e801, or stop and error.
(Andi: I would particularly appreciate your opinion on this issue.)
-hpa
arch/i386/boot/memory.c +1 -11
@@ -34,17 +34,7 @@ static int detect_memory_e820(void) "=m" (*desc) : "D" (desc), "a" (0xe820)); -/* Some BIOSes stop returning SMAP in the middle of -the search loop. We don't know exactly how the BIOS -screwed up the map at that point, we might have a -partial map, the full map, or complete garbage, so -just return failure. */ -if (id !=SMAP ) { - count =0 ; -break ; - } - -if (err) +if (id !=SMAP || err)break ; count++;
Quoted 4 lines · H. Peter Anvin
As luck would have it, it's not just an obscure Geode system which has a broken E820 implementation. Today I received a bug report about a Dell system (XPS M1330) with broken E820.
Quoted 8 lines
Unfortunately, the workaround for the Geode breaks this system, because x86-64 doesn't fall back to the e801/88 information like the i386 kernel does.
I wonder if the relevant people could test out this patch to see how it works on their respective system. This patch reverts to 2.6.23-rc8 behaviour of simply truncating the map, but still makes e801/88 info available to the kernel; this hopefully should match 2.6.22 behaviour.
Breaks on the Geode - original behavior.
I think that having boot_prams.e820_entries != 0 makes the kernel assume the e820 data is correct.
Quoted 5 lines
I want to emphasize that this is seriously broken. Using a partial e820 map could have disastrous results, since the kernel will have partial memory map information and not know about reserved areas, etc. Part of me feels that the right thing to do is what the current git kernel does -- either fall back to e801, or stop and error.
I'm inclined to agree.
Jordan
Quoted 6 lines · Jordan Crouse
Breaks on the Geode - original behavior.
I think that having boot_prams.e820_entries != 0 makes the kernel assume the e820 data is correct.
Okay, now I'm utterly baffled how 2.6.22 ever worked on this Geode, because this, to the best of my reading, mimics the 2.6.22 behavior exactly. DID IT REALLY, and/or did you make any kind of configuration changes?
Quoted 7 lines
Quoted 5 lines
I want to emphasize that this is seriously broken. Using a partial e820 map could have disastrous results, since the kernel will have partial memory map information and not know about reserved areas, etc. Part of me feels that the right thing to do is what the current git kernel does -- either fall back to e801, or stop and error.
I'm inclined to agree.
Arguably the right thing to do is to find the responsible BIOS engineer and shoot them, but that's hard to do without robotics.
-hpa
Quoted 4 lines · H. Peter Anvin
Quoted 3 lines · Jordan Crouse
Breaks on the Geode - original behavior.
Quoted 8 lines
Quoted 3 lines
I think that having boot_prams.e820_entries != 0 makes the kernel assume the e820 data is correct.
Okay, now I'm utterly baffled how 2.6.22 ever worked on this Geode, because this, to the best of my reading, mimics the 2.6.22 behavior exactly. DID IT REALLY, and/or did you make any kind of configuration changes?
I copied in a 2.6.22 kernel to see that it really did work, and it did. But here's the crazy part - I did a dmesg, and it looks like it *is* using e820 data, and it looks complete (I see the entire map - including the ACPI and reserved blocks way up high).
So apparently it was the 2.6.22 code that was buggy, but reading it, I don't immediately see how.
Jordan
Signature · 3 lines
Jordan Crouse Systems Software Development Engineer Advanced Micro Devices, Inc.
Quoted 9 lines · Jordan Crouse
I copied in a 2.6.22 kernel to see that it really did work, and it did. But here's the crazy part - I did a dmesg, and it looks like it *is* using e820 data, and it looks complete (I see the entire map - including the ACPI and reserved blocks way up high).
So apparently it was the 2.6.22 code that was buggy, but reading it, I don't immediately see how.
Was this a stock 2.6.22 kernel, or might it have been modified?
There is, of course, also the possibility that triggering the BIOS bug in your case depends on some delicate combination of input state.
-hpa
Quoted 12 lines · Jordan Crouse
Quoted 10 lines · H. Peter Anvin
Quoted 5 lines · Jordan Crouse
Breaks on the Geode - original behavior.
I think that having boot_prams.e820_entries != 0 makes the kernel assume the e820 data is correct.
Okay, now I'm utterly baffled how 2.6.22 ever worked on this Geode, because this, to the best of my reading, mimics the 2.6.22 behavior exactly. DID IT REALLY, and/or did you make any kind of configuration changes?
Quoted 8 lines
I copied in a 2.6.22 kernel to see that it really did work, and it did. But here's the crazy part - I did a dmesg, and it looks like it *is* using e820 data, and it looks complete (I see the entire map - including the ACPI and reserved blocks way up high).
So apparently it was the 2.6.22 code that was buggy, but reading it, I don't immediately see how.
Oh bugger, looks like this one might be genuinely my fault after all. The ID check in the new code is buggy.
Can you please test this revised patch out (against current -git)?
-hpa
arch/i386/boot/memory.c +1 -11
@@ -34,17 +34,7 @@ static int detect_memory_e820(void) "=m" (*desc) : "D" (desc), "a" (0xe820)); -/* Some BIOSes stop returning SMAP in the middle of -the search loop. We don't know exactly how the BIOS -screwed up the map at that point, we might have a -partial map, the full map, or complete garbage, so -just return failure. */ -if (id !=SMAP ) { - count =0 ; -break ; - } - -if (err) +if (id !=SMAP || err)break ; count++;
Quoted 45 lines · H. Peter Anvin
Quoted 12 lines · Jordan Crouse
Quoted 10 lines · H. Peter Anvin
Quoted 5 lines · Jordan Crouse
Breaks on the Geode - original behavior.
I think that having boot_prams.e820_entries != 0 makes the kernel assume the e820 data is correct.
Okay, now I'm utterly baffled how 2.6.22 ever worked on this Geode, because this, to the best of my reading, mimics the 2.6.22 behavior exactly. DID IT REALLY, and/or did you make any kind of configuration changes?
Quoted 8 lines
I copied in a 2.6.22 kernel to see that it really did work, and it did. But here's the crazy part - I did a dmesg, and it looks like it *is* using e820 data, and it looks complete (I see the entire map - including the ACPI and reserved blocks way up high).
So apparently it was the 2.6.22 code that was buggy, but reading it, I don't immediately see how.
Oh bugger, looks like this one might be genuinely my fault after all. The ID check in the new code is buggy.
Can you please test this revised patch out (against current -git)?
-hpa
arch/i386/boot/memory.c +0
-5@@ -34,17 +34,7 @@ static int detect_memory_e820(void) "=m" (*desc) : "D" (desc), "a" (0xe820)); -/* Some BIOSes stop returning SMAP in the middle of -the search loop. We don't know exactly how the BIOS -screwed up the map at that point, we might have a -partial map, the full map, or complete garbage, so -just return failure. */
arch/i386/boot/memory.c static int detect_memory_e820(void) · line 40
Quoted 10 lines
arch/i386/boot/memory.c +1
-6-if (id !=SMAP ) { - count =0 ; -break ; - } - -if (err) +if (id !=SMAP || err)break ; count++;
That looks the same as the previous patch you sent?
Jordan
Signature · 3 lines
Jordan Crouse Systems Software Development Engineer Advanced Micro Devices, Inc.
Quoted 9 lines · Jordan Crouse
Quoted 5 lines
Quoted 1 line
Oh bugger, looks like this one might be genuinely my fault after all. The ID check in the new code is buggy.
Can you please test this revised patch out (against current -git)?
That looks the same as the previous patch you sent?
Sorry, this is the right one...
-hpa
arch/i386/boot/memory.c +2 -3
@@ -28,11 +28,10 @@ static int detect_memory_e820(void) do { size = sizeof(struct e820entry); - id = SMAP; asm("int $0x15; setc %0" - : "=am" (err), "+b" (next), "+d" (id), "+c" (size), + : "=dm" (err), "+b" (next), "=a" (id), "+c" (size), "=m" (*desc) - : "D" (desc), "a" (0xe820)); + : "D" (desc), "d" (SMAP), "a" (0xe820)); /* Some BIOSes stop returning SMAP in the middle of the search loop. We don't know exactly how the BIOS
Quoted 23 lines · H. Peter Anvin
Quoted 9 lines · Jordan Crouse
Quoted 5 lines
Quoted 1 line
Oh bugger, looks like this one might be genuinely my fault after all. The ID check in the new code is buggy.
Can you please test this revised patch out (against current -git)?
That looks the same as the previous patch you sent?
Sorry, this is the right one...
-hpa
arch/i386/boot/memory.c +0
-0@@ -28,11 +28,10 @@ static int detect_memory_e820(void) do { size = sizeof(struct e820entry);
arch/i386/boot/memory.c static int detect_memory_e820(void) · line 37
Quoted 10 lines
arch/i386/boot/memory.c +2
-3- id =SMAP ; asm("int $0x15; setc %0" - :"=am" (err),"+b" (next),"+d" (id),"+c" (size), + :"=dm" (err),"+b" (next),"=a" (id),"+c" (size),"=m" (*desc) - :"D" (desc),"a" (0xe820 )); + :"D" (desc),"d" (SMAP ),"a" (0xe820 ));/* Some BIOSes stop returning SMAP in the middle of the search loop. We don't know exactly how the BIOS
Worked, but that just raises more questions. Why didn't more x86 boxes break or, alternatively, why did a new version of the BIOS fix the problem? I guess we shouldn't look a gift horse in the mouth. Or something.
Thanks very much for your help.
Jordan
Signature · 3 lines
Jordan Crouse Systems Software Development Engineer Advanced Micro Devices, Inc.
Quoted 5 lines · Jordan Crouse
Worked, but that just raises more questions. Why didn't more x86 boxes break or, alternatively, why did a new version of the BIOS fix the problem? I guess we shouldn't look a gift horse in the mouth. Or something.
Why didn't more x86 boxes break... well, it's pretty natural an implementation of the BIOS to not clobber registers that aren't outputs.
Arguably the BIOSes that do are still buggy, since there isn't a
well-defined calling sequence for the BIOS and the convention that has evolved is "don't clobber anything unless it's an output."
It's still wrong, however, especially since it means omitting the *real* SMAP check.
-hpa
Quoted 7 lines · H. Peter Anvin
Quoted 5 lines · Jordan Crouse
Worked, but that just raises more questions. Why didn't more x86 boxes break or, alternatively, why did a new version of the BIOS fix the problem? I guess we shouldn't look a gift horse in the mouth. Or something.
Quoted 8 lines
Why didn't more x86 boxes break... well, it's pretty natural an implementation of the BIOS to not clobber registers that aren't outputs.
Arguably the BIOSes that do are still buggy, since there isn't a
well-defined calling sequence for the BIOS and the convention that has evolved is "don't clobber anything unless it's an output."It's still wrong, however, especially since it means omitting the *real* SMAP check.
I'd like to update http://bugzilla.kernel.org/show_bug.cgi?id=9086 with correct information.
Should I add a pointer to the patch from your previous message to it?
Greetings,
Rafael