s3c2410fb: make use of default_display settings

From: Krzysztof Helt <[email protected]>

This patch changes mode selection to always prefer default mode if possible and always honor type of display set by default mode settings.

This patch is required in case the same display modes were defined for different panels (e.g. STN and TFT).

---

This patch requires all s3c2410fb patches sent to this list.

diff -urp linux-2.6.23.old/drivers/video/s3c2410fb.c linux- 2.6.23/drivers/video/s3c2410fb.c
--- linux-2.6.23.old/drivers/video/s3c2410fb.c 2007-08-14
18:02:04.000000000 +0200
+++ linux-2.6.23/drivers/video/s3c2410fb.c 2007-08-14
20:05:10.000000000 +0200
@@ -172,19 +172,28 @@ static int s3c2410fb_check_var(struct fb
struct s3c2410fb_info *fbi = info->par; struct s3c2410fb_mach_info *mach_info = fbi->dev-

struct s3c2410fb_display *display = NULL;
+ struct s3c2410fb_display *default_display = mach_info-

+ mach_info-

+ int type = default_display->type;
unsigned i;

dprintk("check_var(var=%p, info=%p)\n", var, info);

- /* validate x/y resolution */
-
- for (i = 0; i < mach_info->num_displays; i++)
- if (var->yres == mach_info->displays[i].yres &&
- var->xres == mach_info->displays[i].xres &&
- var->bits_per_pixel == mach_info-

- display = mach_info->displays + i;
- break;
- }
+ /* validate x/y resolution */
+ /* choose default mode if possible */
+ if (var->yres == default_display->yres &&
+ var->xres == default_display->xres &&
+ var->bits_per_pixel == default_display->bpp)
+ display = default_display;
+ else
+ for (i = 0; i < mach_info->num_displays; i++)
+ if (type == mach_info->displays[i].type
&&
+ var->yres == mach_info-

+ var->xres == mach_info-

+ var->bits_per_pixel == mach_info-

+ display = mach_info->displays +
i;
+ break;
+ }

if (!display) {
dprintk("wrong resolution or depth %dx%d at %d
bpp\n",

----------------------------------------------------
Najnowszy album światowej klasy DJ'a Paula van Dyka "In Between" już w sklepach! Kompilacja zawiera singiel "White Lies" z udziałem Jessica Sutta z Pussycat Dolls.
http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fpaul.html&sid=1260

From: Krzysztof Helt <[email protected]>

This patch changes mode selection to always prefer default mode if possible and always honor type of display set by default mode settings.

This patch is required in case the same display modes were defined for different panels (e.g. STN and TFT).

---

This patch requires all s3c2410fb patches sent to this list.

diff -urp linux-2.6.23.old/drivers/video/s3c2410fb.c linux-2.6.23/drivers/video/s3c2410fb.c
@@ -172,19 +172,28 @@ static int s3c2410fb_check_var(struct fb
 	struct s3c2410fb_info *fbi = info->par;
 	struct s3c2410fb_mach_info *mach_info = fbi->dev->platform_data;
 	struct s3c2410fb_display *display = NULL;
+	struct s3c2410fb_display *default_display = mach_info->displays +
+						    mach_info->default_display;
+	int type = default_display->type;
 	unsigned i;
 
 	dprintk("check_var(var=%p, info=%p)\n", var, info);
 
-	/* validate x/y resolution */
-
-	for (i = 0; i < mach_info->num_displays; i++)
-		if (var->yres == mach_info->displays[i].yres &&
-		    var->xres == mach_info->displays[i].xres &&
-		    var->bits_per_pixel == mach_info->displays[i].bpp) {
-			display = mach_info->displays + i;
-			break;
-		}
+	/* validate x/y resolution */ 
+	/* choose default mode if possible */
+	if (var->yres == default_display->yres &&
+	    var->xres == default_display->xres &&
+	    var->bits_per_pixel == default_display->bpp)
+		display = default_display;
+	else
+		for (i = 0; i < mach_info->num_displays; i++)
+			if (type == mach_info->displays[i].type &&
+			    var->yres == mach_info->displays[i].yres &&
+			    var->xres == mach_info->displays[i].xres &&
+			    var->bits_per_pixel == mach_info->displays[i].bpp) {
+				display = mach_info->displays + i;
+				break;
+			}
 
 	if (!display) {
 		dprintk("wrong resolution or depth %dx%d at %d bpp\n",

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/

_______________________________________________
Linux-fbdev-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel