Skip to contentSkip to conversation

Telit 864

DISCUSSION Fundu 2 participants 5 messages Nov 14, 2009 – Nov 23, 2009

lore
Share & tools
lore

Fundu

author
#0 lore raw

Hi,

this is my first post, so please excuse me if it doesn't follow some set rules.

Is the TELIT 864 module supported by ofono ?

what i'm looking at is the ability to be able to communicate with the telit module over serial or usb and also use it as a data modem.

any insights would be appreciated.

thanks !

fundu

#1 lore raw

Looks like it would work. Compile source, plugin usb cable, run export OFONO_AT_DEBUG=1 && ofonod -d -n, run enable-modem script and see if runs.

The data modem part isn't quite finished yet. Meaning you can't use pppd or setup a network device for the rest of the sytem to use (using GPRS, etc.). The rest works quite nicely.

Cheers,
Ryan

Quoted 21 lines · Fundu

Hi,

this is my first post, so please excuse me if it doesn't follow some set rules.

Is the TELIT 864 module supported by ofono ?

what i'm looking at is the ability to be able to communicate with the telit module over serial or usb and also use it as a data modem.

any insights would be appreciated.

thanks !

fundu

_______________________________________________
ofono mailing list
ofono(a)ofono.org
http://lists.ofono.org/listinfo/ofono

author
#2 lore raw

Thanks Ryan !

so let me ask this then what's involved in getting data modem part working ?

I can help a on that. Don't know what would be involved in that.

My area of comfort.
1) C
2) linux drivers
3) fair understanding of the telit AT command set.

not familiar with pppd and wonder how that would play into the picture ?

-fundu

----- Original Message ----
From: Ryan Raasch <[email protected]>
To: ofono(a)ofono.org
Sent: Sat, November 14, 2009 8:44:57 AM
Subject: Re: Telit 864

Looks like it would work. Compile source, plugin usb cable, run export OFONO_AT_DEBUG=1 && ofonod -d -n, run enable-modem script and see if runs.

The data modem part isn't quite finished yet. Meaning you can't use pppd or setup a network device for the rest of the sytem to use (using GPRS, etc.). The rest works quite nicely.

Cheers,
Ryan

Quoted 11 lines · Fundu

Hi,

this is my first post, so please excuse me if it doesn't follow some set rules.

Is the TELIT 864 module supported by ofono ?
what i'm looking at is the ability to be able to communicate with the telit module over serial or usb and also use it as a data modem.

any insights would be appreciated.

thanks !

Quoted 8 lines

fundu

      _______________________________________________

ofono mailing list
ofono(a)ofono.org
http://lists.ofono.org/listinfo/ofono

_______________________________________________
ofono mailing list
ofono(a)ofono.org
http://lists.ofono.org/listinfo/ofono

#3 lore raw
Quoted 4 lines · Fundu

Thanks Ryan !

so let me ask this then what's involved in getting data modem part working ?

Uhhh. This is not modem specific.

Quoted 8 lines

I can help a on that. Don't know what would be involved in that.

My area of comfort.
1) C
2) linux drivers
3) fair understanding of the telit AT command set.

not familiar with pppd and wonder how that would play into the picture ?

My suggestion is to read up on pppd and its interaction with modems.

http://en.wikipedia.org/wiki/Point-to-Point_Protocol_daemon

http://tldp.org/HOWTO/PPP-HOWTO/

Ryan

Quoted 49 lines

-fundu

----- Original Message ----
From: Ryan Raasch <[email protected]>
To: ofono(a)ofono.org
Sent: Sat, November 14, 2009 8:44:57 AM
Subject: Re: Telit 864

Looks like it would work. Compile source, plugin usb cable, run export OFONO_AT_DEBUG=1 && ofonod -d -n, run enable-modem script and see if runs.

The data modem part isn't quite finished yet. Meaning you can't use pppd or setup a network device for the rest of the sytem to use (using GPRS, etc.). The rest works quite nicely.

Cheers,
Ryan

Quoted 11 lines · Fundu

Hi,

this is my first post, so please excuse me if it doesn't follow some set rules.

Is the TELIT 864 module supported by ofono ?
what i'm looking at is the ability to be able to communicate with the telit module over serial or usb and also use it as a data modem.

any insights would be appreciated.

thanks !

Quoted 8 lines

fundu

      _______________________________________________

ofono mailing list
ofono(a)ofono.org
http://lists.ofono.org/listinfo/ofono

_______________________________________________
ofono mailing list
ofono(a)ofono.org
http://lists.ofono.org/listinfo/ofono

_______________________________________________
ofono mailing list
ofono(a)ofono.org
http://lists.ofono.org/listinfo/ofono

author
#4 lore raw

Ryan,

Quoted 3 lines

so let me ask this then what's involved in getting data modem part working ?

Quoted 1 line

Uhhh. This is not modem specific.

Are the AT commands common between all modems then ? Aren't there TELIT specific AT commands that need to be considered here ?

Quoted 5 lines
Quoted 5 lines

My suggestion is to read up on pppd and its interaction with modems.

http://en.wikipedia.org/wiki/Point-to-Point_Protocol_daemon

http://tldp.org/HOWTO/PPP-HOWTO/

I looked at the ppp document. Wondering how what changes are required to make the communication between the pppd and the module ?