Skip to contentSkip to conversation

Linux 2.6.22 on ADM5120

PATCH Marian Jancar 1 participant 1 message Oct 10, 2007 MIPS

lore
Share & tools
lore
#0 lore raw

Hi,

I'm trying to boot current Linux kernel with patches from OpenWRT on an Infineon Easy5120-RT but without the LZMA loader. Hence I mimic what patches from
http://nano.gmxhome.de/linux-2.6.17.11-adm5120-patch.diff.gz
and
http://www.student.tue.nl/Q/t.f.a.wilms/adm5120/files/linux-2.6.12-rc1-adm.diff

(I have verified myself that the later boots, as also the 2.6.22 with the LZMA does) do - use 0x80002000 as LOADDADD instead of 0x80001000, and fill to 0x6d8 + jump to kernel_entry in head.S, but the resulting vmlinuz doesn't boot. There is some info at
http://www.linux-mips.org/wiki/Adm5120#Linux_Support

arch/mips/Makefile 2007-10-10 20:44:24.000000000 +0200 renamed from arch/mips/Makefile 2007-09-26 20:03:01.000000000 +0200 +7 -0
diff -urNdp linux-2.6.22.9-vanilla/arch/mips/Makefile linux-2.6.22.9/arch/mips/Makefile
@@ -165,6 +165,13 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/
 load-$(CONFIG_MACH_JAZZ)       += 0xffffffff80080000
 
 #
+# ADMtek 5120
+#
+
+core-$(CONFIG_MIPS_ADM5120)    += arch/mips/adm5120/
+load-$(CONFIG_MIPS_ADM5120)    += 0xffffffff80002000
+
+#
 # Common Alchemy Au1x00 stuff
 #
 core-$(CONFIG_SOC_AU1X00)      += arch/mips/au1000/common/
arch/mips/kernel/head.S 2007-10-10 20:44:24.000000000 +0200 renamed from arch/mips/kernel/head.S 2007-09-26 20:03:01.000000000 +0200 +5 -0
diff -urNdp linux-2.6.22.9-vanilla/arch/mips/kernel/head.S linux-2.6.22.9/arch/mips/kernel/head.S
@@ -134,6 +134,11 @@
         * Necessary for machines which link their kernels at KSEG0.
         */
        .fill   0x400
+#ifdef CONFIG_MIPS_ADM5120
+       /* ADM5120 bootloader jumps to 0x6d8 */
+       .fill   0x2d8
+       j kernel_entry
+#endif
 
 EXPORT(stext)                                  # used for profiling
 EXPORT(_stext)

Any clues what I am missing or what I do wrong?

Marian