Skip to contentSkip to conversation

make atngw100_defconfig - errors

Buildroot Ivan Kuten 2 participants 2 messages Oct 20, 2007 – Oct 21, 2007

lore
Share & tools
lore

Ivan Kuten

author
#0 lore raw

Hi Ulf,

I'm trying to do

make atngw100_defconfig

make

and have the following error:
bzcat /sources/u-boot-1.2.0-atmel-patch.tar.bz2 | tar -C /opt/buildroot/project_build_avr32/atngw100/u-boot-patches -xvf - u-boot-1.2.0-atmel-patch/README.txt
u-boot-1.2.0-atmel-patch/README.txt~
touch /opt/buildroot/project_build_avr32/atngw100/u-boot-patches/.unpacked
toolchain/patch-kernel.sh /opt/buildroot/build_avr32/u-boot-1.2.0-atmel /opt/buildroot/project_build_avr32/atngw100/u-boot-patches \*.patch touch /opt/buildroot/build_avr32/u-boot-1.2.0-atmel/.patched.u-boot-1.2.0-atmel-patch.tar.bz2
cp target/device/Atmel/atngw100/u-boot/atngw100.h /opt/buildroot/build_avr32/u-boot-1.2.0-atmel/include/configs/.
cp: cannot stat `target/device/Atmel/atngw100/u-boot/atngw100.h': No such file or directory
make: *** [/opt/buildroot/project_build_avr32/atngw100/u-boot-1.2.0-atmel/.configured] Error 1

Any advice?

Toolchain seems built OK except build_avr32/staging_dir/bin/avr32-linux-uclibc-cc is symlink to gcc (which is not present in build_avr32/staging_dir/bin/) - seems it should be symlink to avr32-linux-uclibc-gcc

Best regards,
Ivan
--------------------------------
Embedded Linux engineer,
Promwad Company: http://www.promwad.com/
Homepage : http://www.ivankuten.com/
--------------------------------

#1 lore raw
Quoted 26 lines

Hi Ulf,

I'm trying to do

make atngw100_defconfig

make

and have the following error:
bzcat /sources/u-boot-1.2.0-atmel-patch.tar.bz2 | tar -C /opt/buildroot/project_build_avr32/atngw100/u-boot-patches -xvf - u-boot-1.2.0-atmel-patch/README.txt
u-boot-1.2.0-atmel-patch/README.txt~
touch /opt/buildroot/project_build_avr32/atngw100/u-boot-patches/.unpacked toolchain/patch-kernel.sh /opt/buildroot/build_avr32/u-boot-1.2.0-atmel /opt/buildroot/project_build_avr32/atngw100/u-boot-patches \*.patch
touch /opt/buildroot/build_avr32/u-boot-1.2.0-atmel/.patched.u-boot-1.2.0-atmel-patch.tar.bz2 cp target/device/Atmel/atngw100/u-boot/atngw100.h /opt/buildroot/build_avr32/u-boot-1.2.0-atmel/include/configs/.
cp: cannot stat `target/device/Atmel/atngw100/u-boot/atngw100.h': No such file or directory
make: *** [/opt/buildroot/project_build_avr32/atngw100/u-boot-1.2.0-atmel/.configured] Error 1

Quoted 2 lines

Any advice?

Download mainstream U-Boot and copy the "includes/configs/atngw100.h" file to "target/device/Atmel/atngw100/u-boot/atngw100.h" I have seen this before, but did not have time to fix it.

Quoted 5 lines

Toolchain seems built OK except build_avr32/staging_dir/bin/avr32-linux-uclibc-cc is symlink to gcc (which is not present in build_avr32/staging_dir/bin/) - seems it should be symlink to avr32-linux-uclibc-gcc

Best Regards
Ulf Samuelsson