Skip to contentSkip to conversation

inbalanced ioremap/iounmap? in cpm_pic_init(); arch/powerpc/sysdev/commproc.c

PATCH Roel Kluin 2 participants 2 messages Nov 7, 2007 – Nov 8, 2007 PowerPC

lore
Share & tools
lore

Roel Kluin

author
#0 lore raw

It appears to me that ioremap/iounmap in cpm_pic_init() is imbalanced. I am not certain about this, nor was the patch tested. please review.
--
fix ioremap/iounmap imbalance

---

arch/powerpc/sysdev/commproc.c +5 -3
index f6a6378..7b1dd9c 100644
@@ -152,13 +152,13 @@ unsigned int cpm_pic_init(void)
 	cpic_reg = ioremap(res.start, res.end - res.start + 1);
 	if (cpic_reg == NULL)
 		goto end;
 
 	sirq = irq_of_parse_and_map(np, 0);
 	if (sirq == NO_IRQ)
-		goto end;
+		goto io_out;
 
 	/* Initialize the CPM interrupt controller. */
 	hwirq = (unsigned int)irq_map[sirq].hwirq;
 	out_be32(&cpic_reg->cpic_cicr,
 	    (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
 		((hwirq/2) << 13) | CICR_HP_MASK);
@@ -167,13 +167,13 @@ unsigned int cpm_pic_init(void)
 
 	cpm_pic_host = irq_alloc_host(of_node_get(np), IRQ_HOST_MAP_LINEAR,
 				      64, &cpm_pic_host_ops, 64);
 	if (cpm_pic_host == NULL) {
 		printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
 		sirq = NO_IRQ;
-		goto end;
+		goto io_out;
 	}
 
 	/* Install our own error handler. */
 	np = of_find_compatible_node(NULL, NULL, "fsl,cpm1");
 	if (np == NULL)
 		np = of_find_node_by_type(NULL, "cpm");
@@ -187,13 +187,15 @@ unsigned int cpm_pic_init(void)
 		goto end;
 
 	if (setup_irq(eirq, &cpm_error_irqaction))
 		printk(KERN_ERR "Could not allocate CPM error IRQ!");
 
 	setbits32(&cpic_reg->cpic_cicr, CICR_IEN);
-
+	goto end;
+io_out:
+	iounmap(cpic_reg);
 end:
 	of_node_put(np);
 	return sirq;
 }
 
 void __init cpm_reset(void)
#1 lore raw
Quoted 2 lines · Roel Kluin

It appears to me that ioremap/iounmap in cpm_pic_init() is imbalanced. I am not certain about this, nor was the patch tested. please review.

You missed several error paths... and if we're going to clean up the error handling for this function, we might as well free cpm_pic_host, and do an of_node_put() before the second of_find_compatible_node(), as well.

Quoted 5 lines
arch/powerpc/sysdev/commproc.c +0 -0
@@ -187,13 +187,15 @@ unsigned int cpm_pic_init(void)
 		goto end;
 
 	if (setup_irq(eirq, &cpm_error_irqaction))
 		printk(KERN_ERR "Could not allocate CPM error IRQ!");

arch/powerpc/sysdev/commproc.c unsigned int cpm_pic_init(void) · line 199

Quoted 10 lines
arch/powerpc/sysdev/commproc.c +3 -1
 
 	setbits32(&cpic_reg->cpic_cicr, CICR_IEN);
-
+	goto end;
+io_out:
+	iounmap(cpic_reg);
 end:
 	of_node_put(np);
 	return sirq;
 }

Ick. Maybe better to just duplicate the of_node_put().

-Scott