mac80211 and SIOCSIWAUTH
Hi, I'm a user of Lenovo R61 laptop with Intel 3945 wireless card. I have Gentoo and would like to use the iwlwifi + wpa_supplicant driver, but I can't because Wi-Fi installed in our office needs WPA2 authentication and I can't connect to it. There no problems using ipw3945d. #wpa_supplicant config
ap_scan=2
network={
ssid="point1"
key_mgmt=WPA-EAP
scan_ssid=1
identity="nvetoshkin"
proto=WPA2
eap=TLS
ca_cert="/home/nekto/certificate.pem"
private_key="/home/nekto/nvetoshkin.p12"
private_key_passwd="nvetoshkin"
}ioctl[SIOCSIWAUTH]: Operation not supported - this error always appears in wpa_supplicant output. I digged a bit in source code and found out that it is mac80211 subsystem who returns ENOTSUP. Is it really the cause of my problems or am I just confused?
-=-=-=-
Vetoshkin Nikita
Quoted 2 lines · On Thu, 2007-11-08 at 23:46 +0500, =D0=92=D0=B5=D1=82=D0=BE=D1=88=D0=BA=…
Hi, I'm a user of Lenovo R61 laptop with Intel 3945 wireless card. I=20 have Gentoo and would like to use the iwlwifi +
wpa_supplicantdriver=
,=20
Quoted 2 lines
but I can't because Wi-Fi installed in our office needs WPA2=20 authentication and I can't connect to it. There no problems using ipw=
3945d.
Quoted 13 lines
#wpa_supplicant config
ap_scan=3D2network=3D{ ssid=3D"point1" key_mgmt=3DWPA-EAP scan_ssid=3D1 identity=3D"nvetoshkin" proto=3DWPA2 eap=3DTLS ca_cert=3D"/home/nekto/certificate.pem" private_key=3D"/home/nekto/nvetoshkin.p12" private_key_passwd=3D"nvetoshkin" }
Quoted 1 line
ioctl[SIOCSIWAUTH]: Operation not supported - this error always appea=
rs=20
Quoted 1 line
in
wpa_supplicantoutput. I digged a bit in source code and found out=
=20
Quoted 2 lines
that it is mac80211 subsystem who returns ENOTSUP. Is it really the cause of my problems or am I just confused?
There's a number of SIOCSIWAUTH sub-options, and not all are necessary, and not all are supported by every driver. That's normal. Ignore the wpa_supplicant message.
Dan
-
To unsubscribe from this list: send the line "unsubscribe linux-wireles= s" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Is anybody interested in this case?
If so, what information should I provide you which be enough to=20 investigate the problem?
- kernel 2.6.23-gentoo
- iwl3945 1.1.21
- ucode 2.14.1
- wpa_supplicant 0.6.0
What else(logs,output)?
Vetoshkin Nikita
Dan Williams =D0=BF=D0=B8=D1=88=D0=B5=D1=82:
Quoted 1 line
On Thu, 2007-11-08 at 23:46 +0500, =D0=92=D0=B5=D1=82=D0=BE=D1=88=D0=BA=
Quoted 1 line · =D0=B8=D0=BD =D0=9D=D0=B8=D0=BA=D0=B8=D1=82=D0=B0 wrote:
Quoted 1 line
Hi, I'm a user of Lenovo R61 laptop with Intel 3945 wireless card. I=
=20
Quoted 1 line
Quoted 1 line
have Gentoo and would like to use the iwlwifi +
wpa_supplicantdrive=
r,=20
Quoted 2 lines
Quoted 2 lines
but I can't because Wi-Fi installed in our office needs WPA2=20 authentication and I can't connect to it. There no problems using ip=
w3945d.
Quoted 6 lines
Quoted 6 lines
#wpa_supplicant config
ap_scan=3D2network=3D{ ssid=3D"point1" key_mgmt=3DWPA-EAP scan_ssid=3D1
Quoted 8 lines
Quoted 8 lines
identity=3D"nvetoshkin" proto=3DWPA2 eap=3DTLS ca_cert=3D"/home/nekto/certificate.pem" private_key=3D"/home/nekto/nvetoshkin.p12" private_key_passwd=3D"nvetoshkin" }ioctl[SIOCSIWAUTH]: Operation not supported - this error always appe=
ars=20
Quoted 1 line
Quoted 1 line
in
wpa_supplicantoutput. I digged a bit in source code and found ou=
t=20
Quoted 4 lines
Quoted 2 lines
that it is mac80211 subsystem who returns ENOTSUP. Is it really the cause of my problems or am I just confused?
=20
There's a number of SIOCSIWAUTH sub-options, and not all are necessar=
y,
Quoted 1 line
and not all are supported by every driver. That's normal. Ignore th=
e
Quoted 7 lines
wpa_supplicantmessage.
=20
Dan
=20
=20
-
To unsubscribe from this list: send the line "unsubscribe linux-wirel=
ess" in
Quoted 3 lines
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
=20
--=20
=D0=A1 =D1=83=D0=B2=D0=B0=D0=B6=D0=B5=D0=BD=D0=B8=D0=B5=D0=BC, =D0=92=D0=B5=D1=82=D0=BE=D1=88=D0=BA=D0=B8=D0=BD =D0=9D=D0=B8=D0=BA=D0=B8= =D1=82=D0=B0
=D0=98=D0=BD=D0=B6=D0=B5=D0=BD=D0=B5=D1=80 =D0=BF=D0=BE=D0=B4=D0=B4=D0=B5= =D1=80=D0=B6=D0=BA=D0=B8 =D1=81=D0=B8=D1=81=D1=82=D0=B5=D0=BC IP-=D1=82= =D0=B5=D0=BB=D0=B5=D1=84=D0=BE=D0=BD=D0=B8=D0=B8 =D0=A1=D0=B5=D1=80=D0=B2=D0=B8=D1=81=D0=BD=D1=8B=D0=B9 =D1=86=D0=B5=D0=BD= =D1=82=D1=80
=D0=9A=D0=BE=D0=BC=D0=BF=D0=B0=D0=BD=D0=B8=D1=8F Naumen
-
To unsubscribe from this list: send the line "unsubscribe linux-wireles= s" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 12 lines · On Thu, 2007-11-08 at 23:46 +0500, =A7=A3=A7=D6=A7=E4=A7=E0=A7=EA=A7=DC=…
ap_scan=3D2
network=3D{ ssid=3D"point1" key_mgmt=3DWPA-EAP scan_ssid=3D1 identity=3D"nvetoshkin" proto=3DWPA2 eap=3DTLS ca_cert=3D"/home/nekto/certificate.pem" private_key=3D"/home/nekto/nvetoshkin.p12" private_key_passwd=3D"nvetoshkin" }
Can you try ap_scan=3D1? Last time I check wpa_supplicant source, it se= ems
it doesn't pass the bssid and frequency in the "ap_scan=3D2" case when = it
is trying to associate. (of course I could be wrong).
Thanks,
-yi
-
To unsubscribe from this list: send the line "unsubscribe linux-wireles= s" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html