MX31 patch: boot code
Hi,
I'm having a look at the patches you released for MX31 processor. In particular I'm comparing the early boot code with the one provided by Freescale along with Redboot.
If I did not miss something, I noted that some of the initializations performed by Freescale (AIPS, MAX, M3IF etc.) are not implemented in your code.
Am I right? If yes, do you think these are not strictly necessary?
Thanks in advance,
llandre
DAVE Electronics System House - R&D Department
web: http://www.dave-tech.it email: r&d2 at dave-tech.it
Quoted 6 lines · llandre
I'm having a look at the patches you released for MX31 processor. In particular I'm comparing the early boot code with the one provided by Freescale along with Redboot. If I did not miss something, I noted that some of the initializations performed by Freescale (AIPS, MAX, M3IF etc.) are not implemented in your code. Am I right? If yes, do you think these are not strictly necessary?
We started with bringing up the board in a very minmal way, so it will probably not initialize it completely.
Robert
Signature · 5 lines
Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
Pengutronix - Linux Solutions for Science and Industry
Handelsregister: Amtsgericht Hildesheim, HRA 2686
Hannoversche Str. 2, 31134 Hildesheim, Germany
Phone: +49-5121-206917-0 | Fax: +49-5121-206917-9