powerpc: Add support for PORTA and PORTB odr registers

PORTA and PORTB have odr registers, as well. However, the PORTB odr register is only 16bit.

---
arch/powerpc/sysdev/commproc.c | 13 +++++++++++++

1 files changed, 13 insertions(+), 0 deletions(-)

index d5a0dcf..3694a69 100644
@@ -441,6 +441,13 @@ static void cpm1_set_pin32(int port, int pin, int flags)

	else
		clrbits32(&iop->par, pin);

+ if (port == CPM_PORTB) {
+ if (flags & CPM_PIN_OPENDRAIN)
+ setbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
+ else
+ clrbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
+ }
+

	if (port == CPM_PORTE) {
		if (flags & CPM_PIN_SECONDARY)
			setbits32(&iop->sor, pin);
@@ -474,6 +481,12 @@ static void cpm1_set_pin16(int port, int pin, int flags)
	else
		clrbits16(&iop->par, pin);

+ if (port == CPM_PORTA) {
+ if (flags & CPM_PIN_OPENDRAIN)
+ setbits16(&iop->odr, pin);
+ else
+ clrbits16(&iop->odr, pin);
+ }

	if (port == CPM_PORTC) {
		if (flags & CPM_PIN_SECONDARY)
			setbits16(&iop->sor, pin);

1.5.3.5

Where is the odr field of cpm_ioport16 defined? It's the same position as sor, so maybe call it odr_sor or something.

Also, please add an extra newline after the closing brace.

-Scott