(no subject)

Dear :
Thank you .
I'm porting U-Boot to the WindRiver MDP8xx PRO board.Now I think I
should run the U-Boot on my board in the simpliest way, so I just
configed the necessary devices like FLASH ,DRAM .
I can provide anything I have ,and thank you very very much .The
include/configs/windriver.h and board/windrive/windriver.c have been
included in the attachment.The MDP8xx PRO UM is too large to be
attatched here.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: windriver.c
Type: application/octet-stream
Size: 4006 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20031025/de1821c1/attachment.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: windriver.h
Type: application/octet-stream
Size: 8517 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20031025/de1821c1/attachment-0001.obj

Dear Wang Cheng,

So what do you expect?

You don't provide any information about the hardware, and some fragments of code - do you by any chance expect that now sombody volunteers and ports U-Boot to that board, based on zero information, and for free?

I'm afraid it doesn't work like that.

Please make yourself clear and tell us what you want: on this mailing list you can get free advice to solve specific problems etc., but if you are looking for someone who ports U-Boot to your board you will either have to do it yourself or ask for professional support (which is _not_ free).

Best regards,

Wolfgang Denk

Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
A penny saved is a penny to squander.
- Ambrose Bierce