Skip to contentSkip to conversation

Linux 2.6.24-rc* regression: sensors says "No sensors found"

DISCUSSION Stefan Richter 1 participant 3 messages Nov 24, 2007

lore
Share & tools
lore
#0 lore raw

I just booted 2.6.24-rc3 on two different PCs, one with i945 based MSI motherboard and i386 kernel and one with i945 based Apple motherboard and x86-64 kernel. Before that I ran linux 2.6.23.

On both PCs, "sensors" exits with

Quoted 3 lines

No sensors found!
Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are.

Modules loaded on the i386, among others:
coretemp, w83627ehf, hwmon_vid, hwmon

Modules loaded on the x86-64, among others:
i2c_dev, applesmc, led_class, input_polldev, coretemp, hwmon, eeprom

The configuration scripts are the same as I used them under 2.6.23. sensors-detect doesn't come up with anything which I didn't know and had configured already. On both PCs:

$ sensors -v
sensors version 2.10.4 with libsensors version 2.10.4
Signature · 8 lines
Stefan Richter
-===-=-== =-= =---
http://arcgraph.de/sr/

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
#1 lore raw
Quoted 6 lines · Stefan Richter

I just booted 2.6.24-rc3 on two different PCs, one with i945 based MSI motherboard and i386 kernel and one with i945 based Apple motherboard and x86-64 kernel. Before that I ran linux 2.6.23.

On both PCs, "sensors" exits with

Quoted 1 line

No sensors found!

now logged at http://bugzilla.kernel.org/show_bug.cgi?id”51

Signature · 8 lines
Stefan Richter
-===-=-== =-= =---
http://arcgraph.de/sr/

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
#2 lore raw

(solved) Re: Linux 2.6.24-rc* regression: sensors says "No sensors found"

Quoted 9 lines
Quoted 6 lines · Stefan Richter

I just booted 2.6.24-rc3 on two different PCs, one with i945 based MSI motherboard and i386 kernel and one with i945 based Apple motherboard and x86-64 kernel. Before that I ran linux 2.6.23.

On both PCs, "sensors" exits with

Quoted 1 line

No sensors found!

now logged at http://bugzilla.kernel.org/show_bug.cgi?id”51

Updating sysfsutils from version 1.3.0 to 2.1.0 cured this on both PCs. Thanks to Jean for pointing me to sysfsutils.

Signature · 8 lines
Stefan Richter
-===-=-== =-= =---
http://arcgraph.de/sr/

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors