Tool chain for linux using mips
Hello,
I was wondering which MIPS tool chains people are using and recommend, prebuilt and/or roll-your-own. From http://www.kegel.com/crosstool/crosstool-0.43/buildlogs/
there doesn't seem to be any combination that builds cleanly for the mips/mipsel.
Regards,
Wink Saville
Quoted 6 lines · In message <[email protected]> you wrote:
I was wondering which MIPS tool chains people are using and recommend, prebuilt and/or roll-your-own.
From http://www.kegel.com/crosstool/crosstool-0.43/buildlogs/
there doesn't seem to be any combination that builds cleanly for the mips/mipsel.
Well, we use the ELDK, obviously.
See http://www.denx.de/wiki/view/DULG/ELDK.
For the ELDK mailing list please see
http://lists.denx.de/mailman/listinfo/eldk
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Accident: A condition in which presence of mind is good, but absence of body is better.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Hi, see http://wiki.debian.org/BuildingCrossCompilers for Debian-based systems.
//Markus
Quoted 8 lines · Wink Saville
Hello,
I was wondering which MIPS tool chains people are using and recommend, prebuilt and/or roll-your-own. From
http://www.kegel.com/crosstool/crosstool-0.43/buildlogs/ there doesn't seem to be any combination that builds cleanly for the mips/mipsel.
Quoted 5 lines
Regards,
Wink Saville
- --
_______________________________________
Mr Markus Gothe
Software Engineer
Phone: +46 (0)13 21 81 20 (ext. 1046)
Fax: +46 (0)13 21 21 15
Mobile: +46 (0)73 718 72 80
Diskettgatan 11, SE-583 35 Linköping, Sweden www.27m.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFHSpPF6I0XmJx2NrwRCIstAKCsVP/rD4WbrgEF4D9ZItDpBIABjQCcCXYd V4dkQ1XDMEPwAW11wJhUQZs=
=o/UK
-----END PGP SIGNATURE-----
Few months ago I was able to successfully build using crosstools-0.43. I used demo-mipsel.sh to build c,c++ using the following command line ...
eval cat mips.dat gcc-3.4.5-glibc-2.3.6-tls.dat sh all.sh --notest --gdb
-earlm
Quoted 22 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of Wink Saville
Sent: Sunday, November 25, 2007 10:44 AM
To: [email protected]
Subject: Tool chain for linux using mipsHello,
I was wondering which MIPS tool chains people are using and recommend, prebuilt and/or roll-your-own.
From http://www.kegel.com/crosstool/crosstool-0.43/buildlogs/
there doesn't seem to be any combination that builds cleanly for the mips/mipsel.Regards,
Wink Saville